Use and Care

Undercounter Dispenser and Ice machine 7UC100A/7UD100A 17
Service (continued) –––––––––––––––––––––––––––––––––––––––––––––––––––
7. Install compression nozzle:
§ Remove and inspect compression nozzle O-ring seal.
Replace if damaged in any way.
§ Clean O-ring groove. Lubricate O-ring with Petro-gel and
reinstall.
§ Install compression nozzle (Fig.21.1).
§ Install compression nozzle retainer (Fig.21.2).
§ Install M6 socket head allen screw (Fig.21.3).
Fig. 21
2
1
3
8. Install transport tube (Fig. 22.1).
9. Tighten hose clamp (Fig.22.2).
Fig. 22
2
1
10. Install gear motor:
§ Install main housing insulation (Fig.23.1).
§ Slide gear motor onto auger shaft (Fig.23.2).
§ Install two M6x90 allen screws (Fig. 23.3).
Fig. 23
3
3
2
1