Use and Care

24 Undercounter Dispenser and Ice machine 7UC100A/7UD100A
Service (continued) ––––––––––––––––––––––––––––––––––––––––––––––––––––
User Interface Display Identication
Operation Display
Condition
Procedure
Normal
operation
—
Cleaning
Mode
Press and release maintenance/clean switch to
clean the user interface without dispensing ice
or water (see Maintenance/Cleaning Mode on
page 9).
Drip tray full Empty drip tray.
PM
Six-month
periodic
maintenance
required
Follow Maintenance Mode procedure (below)
and also see Cleaning and Sanitizing on page
11.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until displays.
Complete the cleaning and sanitizing procedure
shown on page 11 and change the lter, if so
equipped. Exit Maintenance Mode by pressing
and holding maintenance/clean switch until
no longer displays.
Service - 8000
hr bushing
check
Call Follett Technical Service Group at (877)
612-5086 or [phone]. The ashing
wrench indicates that the 8000 hr bushing check
is required.
High amps Contact Follett technical service group at (877)
612-5086 or [phone].
Note: For dispensers after serial number
D45191, the phone and wrench will not be
illuminated.
Internal leak in
dispenser
Locate leak and repair - Press reset on control
board. Contact Follett if ice machine is leaking.
Sleep mode Press either dispense button to return to normal
operation.