Flexi-Tops™ Installation Instructions for Follett single door upright bins and Ice•DevIce™ systems 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.
Welcome to Follett Follett ice storage and bins enjoy a well-deserved reputation for excellent performance and long-term reliability. To ensure that your equipment delivers this same degree of service, please read this manual carefully before installing components. If you have questions, please call our technical service group at (800) 523-9361 or (610) 252-7301. Before you begin After uncrating, remove all packing material and inspect equipment for shipping damage.
Overview Installation of Flexi-Top kits consist of inserting a combination of Flexi-Panel(s) to accommodate specific icemaker model, and application of an inner gasket and an outer gasket.* *Note: some icemakers will not require the use of a Flexi-Panel™, and will require only the gasket procedure. Flexi-Panel and gasket specifications Refer to the charts on pages 4 and 5 to find the Flexi-Panel combination for your application and corresponding figure drawing (pages 6 - 12).
Flexi-Top specifications Flexi-Tops are shipped in four standard configurations. Use the charts below to find the correct Flexi-Top and FlexiPanel combination for the icemaker and bin used. Top A - 48" wide bin Top B - 48" wide bin Top C - 60" wide bin 23-9/16" 44-15/16" 28-1/8" Flexi-Top A - 48" Icemaker Manufact.
Flexi-Top C - 60" Icemaker Manufact.
NOTE: All dimensions shown are from edge of bin top. Fig. 1 Fig. 2 9-1/4" 9-1/4" outer gasket outer gasket 4-1/2" outer gasket 22-5/8" outer gasket 2 9-1/4" 9-1/4" outer gasket outer gasket 3-3/8" outer gasket 2 25-5/8" outer gasket 2 2 ice drop opening ice drop opening 10-5/16" panel 10-5/16" panel 10-5/16" panel Fig. 3 (no Flexi-Panels needed) 10-5/16" panel Fig.
NOTE: All dimensions shown are from edge of bin top. Fig. 9 Fig. 10 (no Flexi-Panels needed) 1/2" outer gasket 9-1/4" 9-1/4" outer gasket outer gasket 5-1/4" outer gasket 22-1/8" outer gasket 4/1/2" outer gasket 2 2 22-5/8" outer gasket ice drop opening ice drop opening 10-5/16" panel 10-5/16" panel Fig. 11 Fig.
NOTE: All dimensions shown are from edge of bin top. Fig. 17 3/4" outer gasket Fig. 18 (no Flexi-Panels needed) 21" outer gasket 21" outer gasket 4-1/2" outer gasket 3/4" outer gasket 1/4" outer gasket 1/4" outer gasket 26-3/8" outer gasket 23" outer gasket 1 ice drop opening ice drop opening ice drop opening 21-1/4" panel Fig. 19 (no Flexi-Panels needed) 8-13/16" outer gasket Fig. 20 (no Flexi-Panels needed) 9-11/16" outer gasket 1" outer gasket 26-3/8" outer gasket ice drop opening Fig.
NOTE: All dimensions shown are from edge of bin top. Fig. 25 (no Flexi-Panels needed) Fig. 26 (no Flexi-Panels needed) 6-1/8" outer gasket 5-3/16" outer gasket 6-1/8" outer gasket 6-3/8" outer gasket 4-7/16" outer gasket 22-5/8" outer gasket 23-3/8" outer gasket ice drop opening ice drop opening Fig. 27 6-1/4" outer gasket Fig.
NOTE: All dimensions shown are from edge of bin top. Fig. 33 Fig. 34 15-1/8" outer gasket 4-7/16" outer gasket 23" outer gasket 15-1/8" outer gasket 2 15-1/16" outer gasket 3-7/8" outer gasket 23-3/16" outer gasket 2 2 ice drop opening 16-1/4" panel 15-1/16" outer gasket 2 ice drop opening 16-1/4" panel 16-1/8" panel Fig. 35 16-1/8" panel Fig.
NOTE: All dimensions shown are from edge of bin top. Fig. 41 Fig. 42 19-1/8" outer gasket 19-1/8" outer gasket 26-3/8" outer gasket 3 26-3/8" outer gasket 3 ice drop opening 19-1/2" panel Fig. 44 4-1/2" outer gasket 22" outer gasket 22" outer gasket 15-1/8" 15-1/8" outer gasket outer gasket 26-3/8" outer gasket 26-3/8" outer gasket 4 Fig. 45 3 18" panel Fig.
NOTE: All dimensions shown are from edge of bin top. Fig. 49 22" outer gasket 30" outer gasket CUBER 26-3/8" outer gasket 1" outer gasket FLAKER 3 ice drop opening ice drop opening 22-1/2" panel 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.
