Spec Sheet

ManualsBrandsFollett ManualsCommercial Equipment30" Horizon Elite Series Water Condenser Ice Machine with 1385 lbs. Daily Ice Production, Chewblet Ice, and Agion Silver-Based Antimicrobial in Stainless Steel

Horizon Elite

™

self-contained 1010, 1410 series Chewblet® ice machine

Short form speciﬁcation:

Ice machine to be a Follett

Horizon Elite ice machine model

______________ [Insert size/series,condenser type and installation/mounting,

from model number guide] capable of producing compressed nugget ice using

an ecient, sanitary horizontal evaporator/auger system and delivering ice by

a ﬂexible wire reinforced transport tube to ice storage bin, iceand water

dispenser, ice and beverage dispenser, drop-in dispenser or Ice Manager

™

diverter valve system, slide-out compressor/condenser/evaporator with utility

docking station, front-mounted unit status display, evaporator water inlet at

harvest end with automatic ﬂush while producing ice, and semi-automatic

cleaning and sanitizing system, plusall the featureslisted below and mounting/

performance-enhancing accessories checked.

Model configurations

For use with

Install/

mount Condenser V/Hz/Ph

Item number

1010 series

Item number

1410 series

ice storage bin

top

mount

air

208-230/60/1 HCC1010ABT HCC1410ABT

230/50/1 HCE1010ABT HCE1410ABT

water

208-230/60/1 HCC1010WBT HCC1410WBT

230/50/1 HCE1010WBT HCE1410WBT

RIDE

air

208-230/60/1 HCC1010ABS HCC1410ABS

230/50/1 HCE1010ABS HCE1410ABS

water

208-230/60/1 HCC1010WBS HCC1410WBS

230/50/1 HCE1010WBS HCE1410WBS

Follett Vision

™

undercounter

ice & beverage

dispenser

RIDE

air

208-230/60/1 HCC1010AVS HCC1410AVS

230/50/1 HCE1010AVS HCE1410AVS

water

208-230/60/1 HCC1010WVS HCC1410WVS

230/50/1 HCE1010WVS HCE1410WVS

Cornelius PR150

undercounter ice &

beverage dispenser

RIDE

air 208-230/60/1 HCC1010APS HCC1410APS

water 208-230/60/1 HCC1010WPS HCC1410WPS

countertop

ice & beverage

dispenser

(by others)

top

mount

air

208-230/60/1 HCC1010AHT HCC1410AHT

230/50/1 HCE1010AHT HCE1410AHT

water

208-230/60/1 HCC1010WHT HCC1410WHT

230/50/1 HCE1010WHT HCE1410WHT

RIDE

air

208-230/60/1 HCC1010AHS HCC1410AHS

230/50/1 HCE1010AHS HCE1410AHS

water

208-230/60/1 HCC1010WHS HCC1410WHS

230/50/1 HCE1010WHS HCE1410WHS

drop-in dispenser

(by others)

RIDE

air

208-230/60/1 HCC1010AJS HCC1410AJS

230/50/1 HCE1010AJS HCE1410AJS

water

208-230/60/1 HCC1010WJS HCC1410WJS

230/50/1 HCE1010WJS HCE1410WJS

Ice Manager diverter

valve system

RIDE

air 208-230/60/1 HCC1010AMS HCC1410AMS

water 220/60/1 HCC1010WMS HCC1410WMS

Ordered separately.

Not compatible with Micro Chewblet ice.

Requires top kit (see page 4 for item number).

For Micro Chewblet ice, replace second character (C) with an M e.g.HMC1010ABT.

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Job

Item

Features

Horizon Elite

1010 series - up to 1061 lb (482 kg) in 24 hours

1410 series - up to 1466 lb (665 kg) in 24 hours

- automatically transport ice through a tube with

RIDE

technology from up to 75' (22.8 m) away

- chewable, compressed nugget ice is preferred

over cubes

- Chewblet ice dispenses reliably from ice and

beveragedispensers

- available with approximately 1.00" (2.54 cm) long

standard Chewblet ice or optional 3/8" (0.95 cm)

long Micro Chewblet

™

ice

- quiet production without noisy harvest cycles

Revolutionary, scale inhibiting design

- produces ice that has 15% the TDS of the incoming

water for optimum dispensing and long life in drinks

- quarantines and regularly expels scale producing

dissolved solids to dramatically reduce scalebuildup

- increases time between descaling and reduces or

eliminates the need for expensive scale treatment

- saves 35% water compared to comparable cubers

- meets 2018 Department of Energy regulations

Durable, attractive ice machine

- regular bearing inspection or replacement is

notrequired

- upgraded, easy-to-read LED operating status and

diagnosticdisplay

Designed with sanitation in mind

- Agion

silver-based antimicrobial product protection

of key ice and water contact components

- ﬂoatless, sealed design inhibits formation of bioﬁlms

- semi-automatic cleaning and sanitizing system

Warranty

- 3 years parts and labor, 5 years compressor parts

Certiﬁcations

Independent third party studies. Contact Follett for details.

Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.

Summary of content (8 pages)

PAGE 1
Horizon Elite™ self-contained 1010, 1410 series Chewblet® ice machine Short form specification: Features Horizon Elite 1010 series - up to 1061 lb (482 kg) in 24 hours 1410 series - up to 1466 lb (665 kg) in 24 hours - automatically transport ice through a tube with RIDE® technology from up to 75' (22.8 m) away - chewable, compressed nugget ice is preferred over cubes1 - Chewblet ice dispenses reliably from ice and beverage dispensers - available with approximately 1.00" (2.
PAGE 2
Dimensional drawing Accessories Top kit for ice and beverage dispensers (listed on page 4) Water filters (refer to form# 9905) Wall mount bracket (item# 01085455) Ice machine stand, height-adjustable (item# 01085463) Timer to control one or two ice machines (item# 00967265) Longer ice transport tube, specify length: ___ ft/m in 5’/1.
PAGE 3
1 – Locating the ice machine Horizon Elite self-contained Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up to 75' (22.8 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications) require special attention to service access, unit ventilation and ice tube runs (see pages 4-8).
PAGE 4
1 – Locating the ice machine (continued) Top mounting – compatible ice and beverage dispensers 1 Manufacturer Model number Width in (cm) Depth 2 in (cm) Height 3 in (cm) Top kit Coca-Cola dispensers Freestyle 7000 30.10 (76.5) 33.11 (84.1) 47.00 (119.38) H30F30-F 4, 5 DB/ED/DF 200 series 30.00 (76.2) 30.00 (76.2) 34.38 (87.3) H30C30-F DB/ED/DF 250 series 30.00 (76.2) 30.00 (76.2) 38.38 (97.5) H30C30-F DB/ED/DF 300 series 44.00 (111.8) 30.00 (76.2) 34.00 (86.
PAGE 5
3 – Undercounter/in-cabinet mounting and ventilation Using Follett supplied grilles Horizon Elite ice machines can be installed undercounter/in-cabinet to fill bins or dispensers using RIDE technology. Care must be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages. Horizon Elite ice machine Supplied grilles 18.00" (45.
PAGE 6
3 – Undercounter/in-cabinet mounting and ventilation (continued) Using grilles by others/alternate cabinet ventilation Cabinets with ventilation or louvers other than those provided require special consideration to provide proper ventilation. Recirculation of hot air will reduce ice machine performance and can cause ice machine outages. 18.00" (45.7 cm) minimum Grilles by others/ alternate cabinet ventilation 18.00" (45.7 cm) minimum exhaust air in All counter ventilation within 18.00" (45.
PAGE 7
4 – Horizon Elite ice machine mounting accessories Optional wall mount bracket Optional machine stand Important specifier notes 1. For secure wall mounting, specify optional wall mount bracket. 2. Wall and fasteners must support the weight of the ice machine, bracket, supply water and ice. Use of a backing board may be required with hollow wall construction. 3. Machine stand mounting adds 6.88" (17.48 cm) to height of ice machine. 4. No dips in tube routing allowed. 5.
PAGE 8
6 – Horizon Elite ice tube runs - specifier guidelines Long tube runs for RIDE remote ice delivery equipment Important specifier notes 1. 75' (22.8 m) maximum ice transport tube run. 2. Tubing routing bends must have a 6.00" (15.24 cm) radius or larger. support straps beverage dispenser 3. Dips and traps are not allowed. If not supported from underneath, secure insulated ice transport tube at least every 2' (60.9 cm) to prevent drips and traps. maximum 2' (60.9 cm) minimum of 6.00" (15.