Installation Instructions for Remote Condenser

2
REMOTE CONDENSING UNIT
Prior to installation, carefully unpack and inspect the
contents of your condensing unit!
1
Site preparation
2.1
To ensure proper performance, ease of service and warranty coverage, it is critical that you follow
the requirements detailed in this manual. If you cannot meet these requirements or have questions,
call our technical service group at 877.612.5086 for installation support.
• Position condenser unit as shown.
Required clearances:
§ Mininum 48” (121.9 cm) front and back
§ Minimum 24” (61.0 cm) left and right
§ Minimum 36” (91.4 cm) above
Condenser Unit Clearances
1. 1
48.00"
(121.9 cm)
24.00"
(61.0 cm)
48.00"
(121.9 cm)
24.00"
(61.0 cm)
min. 36.00"
(91.4 cm)
air in
exhaust