Spec Sheet

ManualsBrandsFollett ManualsCommercial Equipment19" Maestro Plus Series Air Condenser RIDE Ice Machine with 425 lbs. Daily Ice Production, Chewblet Ice, RIDE Technology and LED Control Board in Stainless Steel

Maestro Plus

™

self-contained 425 series Chewblet® RIDE® ice machine

Features

Maestro Plus Chewblet ice machine with up to 425lb(193.0 kg)

dailyproduction of consumer-preferred Chewblet ice

- automatically transport ice through a tube with RIDE

technology from up to 20' (6 m) away

- available with approximately 1.00" (2.54 cm) long standard

Chewblet ice

- environmentally responsible R404a refrigerant has zero

ozonedepletion potential

- water and energy ecient

- no noisy harvest cycles means quiet ice production

Consumer-preferred Chewblet ice

- preferred over cubes by more than 2:1

- easy to chew

- more reliable dispensing than nugget or pellet ice

- slow melting, maintains drink temperature and quality

comparable to cubes

- higher displacement than cube ice

Key Maestro Plus design features

- durable construction, versatile design – sturdy stainless steel

exterior frame

- stainless steel evaporator, auger and top bearing

- oversized, heavy duty, tapered roller bearings ensure long,

low-maintenance life

- automatic self-ﬂushing of ice machine removesimpurities

- compact design oers in-cabinet/undercounter, ﬂoorstand,

wall bracket, on-fountain dispenser, or on-bin mounting

- 10 ft (3 m) ﬂexible ice transport tube and insulation standard

with RIDE model ice machines (except for “V” models)

Maintenance and service beneﬁts

- cleaning and sanitizing of entire machine takes less than1 hour

- LED control board provides at-a-glance machine status

Warranty

- 3 years parts and labor, 5 years compressor parts

Consumer study conducted by independent agency Roper ASW.

Model configurations

For use with

Install/

mount Condenser V/Hz/Ph Item number

ice storage

bin

RIDE

air

115/60/1

MCD425ABS†

water

115/60/1

MCD425WBS

Follett

Vision

™

dispenser

RIDE

air

115/60/1

MCD425AVS†

water

115/60/1

MCD425WVS

ice and

beverage

dispenser

(by others)

RIDE

air

115/60/1

MCD425AHS†

water

115/60/1

MCD425WHS

† ENERGY STAR® certified

Ordered separately

MCD425ABS shown

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Job

Item

Summary of content (8 pages)

PAGE 1
Maestro Plus™ self-contained 425 series Chewblet® RIDE® ice machine Features Condenser V/Hz/Ph Item number air 115/60/1 MCD425ABS† water 115/60/1 MCD425WBS air 115/60/1 MCD425AVS† water 115/60/1 MCD425WVS air 115/60/1 MCD425AHS† Maestro Plus Chewblet ice machine with up to 425 lb (193.0 kg) daily production of consumer-preferred Chewblet ice - automatically transport ice through a tube with RIDE technology from up to 20' (6 m) away - available with approximately 1.00" (2.
PAGE 2
Accessories Dimensional drawing Water filters (see form# 9905) Nu-Calgon IMS-III sanitizer, 16 oz bottle (item# 00979674) C2 SafeCLEAN Plus™ ice machine cleaner 6 x 8 oz (237 ml) bottles (item# 01149954) Carton of 24 x 8 oz (237 ml) bottles (item# 01149962) Wall mount bracket (see form# 3311) Slide-out track accessory – allows RIDE model ice machines to slideout without disconnecting utilities (see form# 3311) Ice machine stand, height-adjustable (see form# 3311) Longer ice transport tube (10'/3 m is st
PAGE 3
1 – Locating the ice machine Maestro Plus self-contained Chewblet ice machines with RIDE technology allow mounting in a base cabinet, on a wall or on a floor stand up to 20' (6 m) from the dispenser or ice bin. In-cabinet mounting requires special attention to service access, unit ventilation and ice tube runs.
PAGE 4
2 – Undercounter/in-cabinet mounting Cabinet details Important specifier notes 1. Cabinet door opening must meet minimum size requirements shown and be free of obstructions to allow ice machine to slide out (no lip or utilities to block removal). cabinet door opening 19.00"W x 17.50"H (48.3 cm x 44.5 cm) minimum, 24.75"W (62.9 cm) minimum for centered air intake grille 2. Cabinet base must be capable of supporting ice machine and allow ice machine to rest flat on cabinet bottom. 3.
PAGE 5
3 – Undercounter/in-cabinet mounting and ventilation Using Follett supplied grilles Maestro Plus ice machines can be installed undercounter/in-cabinet to fill bins or dispensers using RIDE technology. Care must be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages. Supplied grilles 18.00" (45.
PAGE 6
3 – Undercounter/in-cabinet mounting and ventilation (continued) Using grilles by others/alternate cabinet ventilation Cabinets with ventilation or louvers other than those provided by Follett require special consideration to provide proper ventilation. Recirculation of hot air will reduce ice machine performance and can cause ice machine outages. grilles by others/ alternate cabinet ventilation 18.00" (45.7 cm) minimum 18.00" (45.7 cm) minimum exhaust air in All counter ventilation within 18.00" (45.
PAGE 7
4 – Maestro Plus ice machine mounting accessories Optional wall mount bracket Optional machine stand Optional slide out accessory front view 14.00" (35.6 cm) 13.00" (33.1 cm) 18.125" (46.0 cm) 26.25" (66.7 cm) vertical utility panel 12.75" (32.4 cm) 6.80" (17.27 cm) 20.125" (51.1 cm) B A C 14.00" (35.6 cm) slide-out-track top view D A - 15.125" (38.4 cm) C - 13.25" (33.6 cm) B - 18.625" (47.3 cm) D - 20.75" (52.7 cm) 22.75" (57.8 cm) Icemaker Front 1.563" (4.0 cm) 16.00" (40.7 cm) 19.
PAGE 8
Ice production – air-cooled 60 (16) 70 (21) 80 (27) 90 (32) 100 (38) 50 (10) 460 (208) 425 (193) 390 (177) 355 (161) 320 (145) 60 (16) 438 (198) 405 (184) 373 (169) 340 (154) 307.