Spec Sheet

VU155 series
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
2780-201912 | © Follett LLC
Specification
Ice storage capacity 150 lb (68 kg)
W Width 8 valve models – 31.25" (79.4 cm)
10 valve models – 37.25" (94.6 cm)
D1 Depth 27.38" (69.6 cm)
D2 Depth, drain pan interior 7.38" (18.75 cm)
H1 Height, upper section 22.00" (55.9 cm)
H2 Height, lower section 27.88" (70.8 cm)
H3 Height, leg adjustable 6.00" - 9.00"
(15.24 - 22.86 cm)
H4 Ice dispense height clearance 10.00" (25.4 cm)
K1 Ice dispense chute utility connections are on opposite
side of ice dispense chute
L1 Countertop to lever 7.88" (20.02 cm)
L2 Front of dispenser to lever 6.88" (17.48 cm)
Installation clearance 51.00" (129.5 cm) above counter for
drop-in installation, 1.25" (3.18cm)
maximum counter thickness
Service clearance
NOTE: For additional information
refer to form# 3105.
12.00" (30.5 cm) minimum on side
opposite of ice chute (and on side
transport tube enters), 36.00"
(91.4 cm) minimum above counter
for auger removal
C1 Electrical
115 V/60/1
4.4 amps. 8' (2.4 m) cord and
NEMA 5-15 90º plug provided with
each dispenser. Separate circuits
and disconnects required for
eachdispenser.
C2 Drain - ice storage 3/4" PVC slip joint
C3 Drain - beverage water bath 1.00" ID hose
C4 Drain - drain pan 3/4" PVC hose
C5 Beverage lines 1/4" ID syrup beverage hose, 3/8"ID
carbonated water beverage hose,
3/8" ID plain water beverage hose
C6 Ice machine electrical
connection
Pre-wired bin signal junction box
with twist lock connector(s).
Standard length is 20' (6.1 m).
C7 Ice machine ice transport tube
connection
two ice transport tube entry holes
on each side
Approximate net weight 270 lb (123 kg)
Approximate shipping weight 301lb (137 kg)
NOTE: For indoor use only
SHORT FORM SPECIFICATION:
Ice and beverage dispenser to be Follett
model_________. Dispenser to store up to 150lb(68 kg) of ice and allow loading
of ice at waist level from front or rear. Full-length drain to be one-piece molded
polyethylene. Beverage rail to have (choose one) ___ eight (8) or ___ten(10)
Cornelius UFB1 valves. Beverage rail to be of stainless steel with plastic trim.
Beverage manifold to be pre-plumbed with center 4 valves individually changeable
from carbonated to non-carbonated flavors without disconnecting water lines.
To include 6.00" - 9.00" (15.24 - 22.86cm) adjustable legs for dispenser support.
Storage area to be insulated with CARB compliant non-HFC foam. Electric
keyswitch standard. Dispenser to be pre-configured to accept up to two _________
RIDE model ice machines, sold separately. 8' (2.4 m) cord and NEMA 5-15 90º
hospital grade plug provided. NSF, UL and cUL listed.
Dimensional drawing
6.00"
(15.24 cm)
8.75"
(22.22 cm)
18.50"
(47.0 cm)
5.00"
(12.70 cm)
7.25"
(18.42 cm)
2.88"
(7.32 cm)
D1
D2
H1
H2
H3
C7
C7
C2
C1 C6
C5
C3 C4
W
K1
L1
L2
H4
Counter cutout detail
J1
J2
J3
J4
VU155 – 8 valve unit
J1 Cutout depth 26.25" (66.68 cm) ± .0125" (.0317 cm)
J2 Cutout width 30.375" (77.152 cm) ± .0125" (.0317cm)
J3 Flat surface
required
31.25" (79.38 cm) W x
28.00" (71.12 cm) D
J4 Optional – counter front may be removed for
slide-in installation
VU155 – 10 valve unit
J1 Cutout depth 26.25" (66.68 cm) ± .0125" (.0317 cm)
J2 Cutout width 36.375" (92.392 cm) ± .0125" (.0317 cm)
J3 Flat surface
required
37.25" (94.62 cm) W x
28.00" (71.12 cm) D
J4 Optional – counter front may be removed for
slide-in installation
ICE MANAGER, MICRO CHEWBLET, QUICKCARB and VISION are trademarks of Follett LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country oforigin.