Owners Manual

Specications

Electrical

Each dispenser requires a separate circuit with electrical disconnect within 10 ft (6m). Equipment ground

required. Standard electrical – 115V, 60Hz, 1 phase. Maximum dispenser fuse – 15 amps. For ice machine circuit

requirements, refer to the ice machine specication sheet. Cord and plug provided with each dispenser.

Model Dispenser

number amperage

Single-sided models

VU300M series 6.0 amps

VU300B series 7.0 amps

Dual-sided models

VU300M20D series 8.0 amps

VU300M24D series 8.0 amps

Plumbing

Dispenser 3/4" PVC pipe nipple for bin drain

3/4" PVC pipe nipple for drain pan drain

1/2" ID hose for beverage bath drain

Beverage connections

VU300 single sided units (10 and 12 beverage valves)

Syrup lines - 1/4"

Carbonated and non-carbonated water lines - 3/8"

VU300 dual sided units (12, 20 and 24 beverage valves)

Syrup lines - 3/8"

Carbonated water lines - 1/2"

Non-carbonated water lines - 3/8"

Note: Drains must be hard-piped separately and insulated. Maintain at least 1/4" per foot (6mm per 304mm run)

slope on drain line run.

Water disconnect within 10 feet (3m) of dispenser is suggested for automatic load units.

Follett recommends use of a Follett water lter (part# 00130229) on ice machines connected

to automatic ll dispensers.

Ice machine Refer to detailed specications in ice machine installation manual packed with ice machine