Spec Sheet

801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
2795-201912 | © Follett LLC
Specification
Ice storage capacity 300 lb (136 kg)
W Width 40.88" (103.8 cm)
D1 Depth 32.38" (82.2 cm)
D2 Depth, drain pan interior 9.38" (23.83 cm)
H1 Height, upper section 25.25" (64.1 cm)
H2 Height, lower section 29.50" (74.9 cm)
H3 Height, leg adjustable 4.00" - 6.75"
(10.16 - 17.14 cm)
H4 Ice dispense height clearance 10.88" (27.6 cm)
K1 Ice dispense chute utility connections are on same side
as ice dispense chute
L1 Countertop to lever 8.62" (21.89 cm)
L2 Front of dispenser to lever 9.25" (23.50 cm)
Installation clearance 60.00" (152.4 cm) above counter for
drop-in installation, 1.25" (3.18 cm)
maximum counter thickness
Service clearance
NOTE: For additional information
refer to form# 3105.
12.00" (30.5 cm) minimum on
ice transport tube entry side for
connections, 49.00" (124.5 cm)
minimum above counter for auger
removal
C1 Electrical
115 V/60/1
7amps. Dispenser 15 amps circuit.
8'(2.4 m) cord and NEMA 5-15 90º
plug provided with each dispenser.
Separate circuits and disconnects
required for each dispenser.
C2 Drain - ice storage 3/4" FPT – supplied with air break
C3 Drain - beverage water-bath 1/2" ID hose
C4 Drain - drain pan 3/4" drain nipple
C5 Beverage lines 1/4" ID syrup beverage hose, 3/8"ID
carbonated water beverage hose,
3/8" ID plain water beverage hose
C6 Ice machine electrical
connection
Pre-wired bin signal junction box
with twist lock connector(s).
Standard length is 20' (6.1 m).
C7 Ice machine ice transport tube
connection
two ice transport tube entry holes
on each side (can enter either side)
Approximate net weight 393 lb (178 kg)
Approximate shipping weight 433lb (197 kg)
NOTE: For indoor use only
SHORT FORM SPECIFICATION: Ice and beverage dispenser to be Follett model
_________. Dispenser to store up to 300lb(136 kg) of ice and allow loading of ice
at waist level from front. Full-length drain to be one-piece molded polyethylene.
Beverage rail to have (choose one) ___ eight (8) or ___ten(10) Cornelius UFB1
valves. Beverage rail to be of stainless steel with plastic trim. Beverage manifold
to be pre-plumbed with center 4 valves individually changeable from carbonated
to non-carbonated flavors without disconnecting water lines. To include 4.00"
- 6.75" (10.16-17.15cm) adjustable legs for dispenser support. Storage area to
be insulated with CARB compliant non-HFC foam. Electric keyswitch standard.
Dispenser to be pre-configured to accept up to two _________ RIDE model ice
machines, sold separately. 8' (2.4 m) cord and NEMA 5-15 90º hospital grade plug
provided. NSF, UL and cUL listed.
Dimensional drawing
H1
H2
H3
C7
C7
C2
C1
C6
C5
C3
C4
W
D1
D2
15.00"
(38.1 cm)
2.00"
(5.08 cm)
8.50"
(21.59 cm)
2.75"
(6.98 cm)
K1
L1
L2
H4
Counter cutout detail
J1
J2
J3
J4
J1 Cutout depth 30.375" (77.152 cm) ± .0125"
(.0317 cm)
J2 Cutout width 38.5" (97.79 cm) ± .0125"
(.0317cm)
J3 Flat surface
required
40.875" (103.822 cm) W x
33.00" (83.82 cm) D
J4 Optional – counter front may be removed for
slide-in installation
ICE MANAGER, MICRO CHEWBLET, QUICKCARB and VISION are trademarks of Follett LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country oforigin.