User Manual

24
Configure the parameters according to the network environment; the default IP address of the camera is
192.168.5.163, and the way to obtain the SRT video stream is as follows: srt://192.168.5.163:9000
2. Push Video Stream
Configurations -> Video Configure-> Stream Publish
Push RTMP stream to public network server, the stream camera IP must be on the public network, otherwise it will
fail to connect to server.
Host address: server address, which can be either a domain name or an IP address
Host port: server default port number
Stream name: live/test (live/ XXX)
Username and password: the username and password set by the server, or leave it empty
Access url：rtmp://host domain name: host port/live/xxx
Or (rtmp: //host IP address: host port/live/xxx)
3. NDI Configuration (NDI camera)
Configurations -> Video Configure-> NDI
Click the NDI enable switch and restart the camera to use the NDI function.