User Manual

3
3
【ESC】Exit and back to former menu.
【SETUP】Parameter setting button：Long press 3S to enter the KBD parameter setting status
【CAM ON/OFF】Camera power on/off button
【AF/MF】Auto focus / manual focus：
Manual focus need to work together with [FOCUS]+ or [FOCUS-] button.
【SET PRESET】Presets setting button, working together with number keys and the [ENTER] button.
【CALL PRESET】Call presets button, working with the number keys and the [ENTER] button.
【AE/AAE】Auto Aperture / Aperture priority button, working together with 【OPEN】and【CLOSE】
buttons.
【BLC ON/OFF】: Back light compensation ON/OFF button
【MENU ON/OFF】: MENU ON/OFF button
【HOME】：HOME button
【RESET】: Pan/tilt reset button
【CLR】Clear button: clear the current inputs.
【0】~【9】Number keys：0,1,2,3,4,5,6,7,8,9.
【ENTER】Confirmation key: Confirm the current inputs.
【NEAR】Focus in: manually focus in to make far distance objects clearer
【FAR】Focus out: manually focus out to make near distance objects clearer
【TELE】Narrow-angle button/ Zoom-in button: increase lens magnification, reduce the lens field of view,
enlarge the monitor target.
【WIDE】Wide-angle button/Zoom out button: reduce lens magnification, expand lens field of view and
monitoring range
【OPEN】Aperture plus button: Increase manual aperture. When the aperture is at its maximum, the LCD
screen is displayed in full white. When the camera menu mode is turned on, the next level menu is
entered.
【CLOSE】Aperture minus button: Reduce manual aperture . When the aperture is at its minimum, the
LCD screen is displayed as black. When the camera menu mode is turned on, the menu is returned to
the previous menu.
【CAM】Address selection button: Select the address of the control device (decoder or camera) , it needs
to use together with the number keys and [ENTER] button
【SET ID】Set ID button: long press 3s to set the cascade camera protocol address.
2.2 LCD screen display
All button operations will be displayed on LCD screen. It would enter into power saving mode(with
darkest light), with initializing status displayed if no operation for 30 seconds.
2.3 Joystick Control
（Clockwise/ Counterclockwise rotation only available for 3D design）