User Manual

- 10 -
5. SYSTEM SETTINGS
5.1 Transmitter ID Code Settings
Transmitter ID code are set via an 8-position dip-switch located on the encoder board (refer to fig.3 on
page 6)
Example: ID code → 10010110
Top location: “1” (fig.14) dip switch
Bottom location: “0”


 
  
 Transmitter Frequency Channel Settings
The transmitter frequency channel is also set via an 8-position dip-switch located on the encoder
board (refer to fig.3 on page 6)
Example: frequency 433.075MHZ/channel 01(00000001)
(fig.15) frequency dip switch
Top location: “1” Bottom location: “0”
5.3 Transmitter Function Settings:
Not yet available.