User's Manual

- 16 -
STOP: press → lock (emergency stop) STOP: Elevate clockwise → reset (Turn on the transmitter at any time)
8.2 Transmitter Status Light
Type Status Solution LED Indication
2
Power on when voltage
is low
BATT<2.2V
Red light flash ON_0.1/OFF_1.9 sec
(until power_off)
3
Setting failed or
invalided
Set data by using
JUMPER & dip-switch
without following rules
Red light ON_0.1/OFF_0.1 sec
4
Setting completed JP1 or JP2 inserted Green light ON until power_off.
5
EEPROM ID error
EEPROM ID code
does not match CPU
Red light ON until power_off
6
RF module abnormal PLL UNLOCK Red light ON_0.1/OFF_0.1 sec
7
ID even number error Setting error Red light ON_1/OFF_1 sec
8
Pushbutton locked
power_on
pushbutton connected
Red light ON_1.9/OFF_0.1 sec (until
power_off)
9
Normal power_on
BATT>=2.2V and all
the pushbuttons are not
depressed
All the lights ON_2 sec
10
STOP status STOP button is pressed
MODE 0: Red light ON_0.5/ OFF_
0.5sec, flash 30sec.
MODE 1: all the lights OFF
11
Low voltage during
operation
BATT<2.2V and press
pushbutton
Red light flash ON_0.1/OFF_1.9sec
12
Normal operation Press pushbutton
Green light flash ON_0.1/OFF_1.9
sec
Power status
light