Parts List

- 28 -
3. The LED status within 1
st
second when the power is On:
Red LED On: Channel group mode
Green LED On: Fixed channel mode
4. Afer the 1
st
second display of group channel or fixed channel mode, the
status LED will be off and then display group channel or fixed channel
number repeatedly, as decribed below:
Status LED: Red LED blink once +10, Green LED blink once +1. The
blink will be continued repeatedly until the transmitter power switch is off.
Example 1: The 1
st
second will be after the green LED is On. Red LED blink once, no green LED
blink repeatedly. It is channel 10 under the fixed channel mode.
Example 2: The 1
st
second will be after the green LED is On. No red LED blink, green LED blink
once repeatedly. It is channel 01 under the fixed channel mode.
Example 3: The 1
st
second will be after the green LED is On. Red LED blink 3 times, green LED
blink 9 times repeatedly. It is channel 39 under the fixed channel mode.
Example 4: The 1
st
second will be after the red LED is On. Red LED blink 5 times, green LED blink
7 times repeatedly. Rotate the transmitter to off position and try again with the same result.
It is group channel 57 under the assigned group channel mode.
Example 5: The 1
st
second will be after the red LED is On. Red LED blink 2 times, green LED blink
5 times repeatedly. Rotate the transmitter to off position and try again with the same
result. It is group channel 57 under the auto-cycled group channel mode.
When the 1
st
second display is red LED On group channel mode, after matching the group channel
table with the LED status displayed, power off the transmitter and repeat the display again. If the
same channel group displayed for two times, it would be fixed channel group mode (example 4), it
not, it will be Auto-cycled group channel (example 5).
Under the display of group channel table or channel number status, press WEST button to enter
transmitter pairing mode. Please see 7.3 for details.
Under the display of group channel table or channel number status:
Group channel mode: The transmitter will send 902.0MHz carrier wave continuously for testing.
Fixed channel mode: The transmitter will send the carrier wave of its frequency continuously for
testing.