Installation Guide
INSTALLATION PROCEDURES
Shut o the main water supply before installation by turning the valves clockwise.
The faucet requires an existing 1/2” IPS/MPT threaded male nipple extending from the nished wall
surface. For ease of future maintenance, it is advisable to install shut o valve for the water line at an
easily accessible location.
After installation, remove the aerator and turn on the water to remove any debris in the piping.
Re-assemble aerator. This faucet is equipped with two shut o valves. The wall valve should be closed
(handle in vertical postion) when the the faucet is not in use. If the pot ller is to be left unattended,
please ensure both valves are left in the closed position.
MFF-POTF