Installation Guide

ITALIA FAUCETS, INC.| 877-ITALIA-2 (877-482-5422)
Residential Spring
INSTALLATION
Maintenance
Your new kitchen faucet is designed for years of trouble-free
performance. Keep it looking new by cleaning it periodically with a
soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals
as these will dull the finish and void your warranty.
Important: After installation is completed, turn on water supply
and allow both hot and cold water to run for at least one
minute each. While water is running, check for leaks. Reinstall
spray head. Your new faucet is now ready to use.
Screw the mounting stud into the body. Secure the faucet to the
sink/counter top by installing rubber washer, steel washer and
nut onto it. Tighten with wrench.
Shut off water supplies. Remove old faucet. Clean sink/counter
top surface in preparation for new faucet.
Apply pipe tape onto threads of water supplies. Use wrench
when tightening the hose connection. Do not overtighten.
Place new faucet through mounting hole. If using optional
deckplate, position deckplate over mounting hole, then place
faucet through deckplate and mounting hole.
Fontaine
by ITALIA
Single Handle Kitchen Faucet
with Optional Deckplate
Tools
• Adjustable Wrench
• Pliers
• Pipe Wrench
• Screwdriver
• Teflon Tape
MFF-RSPK2