User's Manual

Once product set up is complete and the device is connected to the
internet, visit http://dashboard.foobot.io from your computer or tablet.
Alternatively, use the retrieval method or app supplied by your reseller.
To perform a factory reset, you need to press the button at the back of
the product while powering up. Only do so if instructed by a support
agent or your reseller.
The procedure is executed as follows:
The monitor is now running factory software. It will probably perform a
software update when it will get back online.
Unplug your device.
Press the reset button using a thin object.
Plug the power back in while keeping the button press.
Wait until the 3 LED are lit (about 3 seconds).
Then you can release the reset button.
1
2
3
4
5
Consult or Retrieve FoobotSAT Readings
Factory reset