User Manual

ManualsBrandsFoodSaver ManualsHome & KitchenFoodsaver V4400 2-in-1 Vacuum Sealer Machine with Automatic Bag Detection and Starter Kit | UL Safety Certified | Black & Silver

www.foodsaver.com 1-877-777-8042

Your FoodSaver

Vacuum Sealing System has a special

Quick Marinate Cycle which will last about ten minutes.

The FoodSaver

Quick Marinating Canister (not included)

is the perfect FoodSaver

accessory for marinating foods.

During the Marinate Cycle, the vacuum pump will “hold”

the vacuum for several minutes then release the vacuum,

allowing the food to “rest” for 30 seconds. This process then

repeats. This “pulsing” action of “vacuuming and resting”

will allow for quicker more flavorful marinating.

IMPORTANT NOTE: During the Quick Marinate Cycle, make sure

knob on lid of the Quick Marinating Canister

is set to OPEN. Do not set knob to Vacuum

during the Marinate Cycle.

1. Prepare enough of your favorite marinade to fully cover

food inside a marinating canister.

Always leave at least one inch (2.54 centimeters)

of space between contents and top of rim.

2. Make sure rubber gasket underneath lids as well as rim

of marinating canister is free from food materials.

3. Pull out Retractable Handheld Sealer from your

FoodSaver

appliance. Remove clear bottom portion

of handheld from top handle (Fig. 1).

4. Insert the end into the port on the canister.

Make sure knob on accessory lid is set to OPEN (Fig. 2).

5. Make sure lid is firmly attached to marinator base.

6. Press Marinate button

on the control panel (Fig. 3).

7. Your FoodSaver

Vacuum Sealing System will now begin the

Quick Marinate Cycle. The Marinate Indicator Light will flash

to indicate the marinating process has begun.

8. During the initial vacuum cycle the Marinate Mode Indicator

will illuminate. While Marinating, the Vacuum Progress

Display will blink during the Vacuum Hold or Rest Cycle.

9. To preserve food safely, after completing the marinating

cycle, the appliance will signal with short beeps to indicate

your Quick Marinate Cycle is completed. Press any button

to silence the signal. You may now cook or refrigerate your

marinated food.

10. To use the Quick Marinating Canister for extended vacuum

storage (beyond the short Marinate Cycle): Rotate knob to

Vacuum/Canister position, connect the Accessory hose

(as above) and select Accessory Mode

from the

control panel. When motor turns off, rotate knob clockwise

to the “Closed” position, then gently twist and remove

Retractable Handheld Sealer from accessory.

Marinating with your FoodSaver

Appliance

Fig. 3

Fig. 2

HOW TO MARINATE

Fig. 1