User Manual

www.foodsaver.com 1-877-777-8042
13
To Clean Appliance:
Press Power Button
9
and remove Power Cord
from electrical outlet. Do not immerse in liquid.
Slide out Drip Tray Drawer (O). Remove Drip Tray
for cleaning by pulling up on the two side tabs.
Check Lower Gasket (N) around Drip Tray (O) to
make sure it is free from food materials.
Do not attempt to remove gaskets.
Antibacterial Drip Tray:
Empty Drip Tray after each use. Wash in warm soapy
water or place in top rack of dishwasher. The Adjustable
Food Sensors in the Drip Tray (O) will not function correctly
if liquid is allowed to remain in Drip Tray.
This appliance has a Tray Full indicator
3
. When excess
liquid fills the Drip Tray, the unit will turn off and the
Tray Full Indicator light will activate. To resume normal
operation, slide out Drip Tray Drawer. Remove Drip Tray
for cleaning by pulling up on the two side tabs. When
replacing drip tray, set the right end of the drip tray
into place, then firmly snap both sides down. Appliance
can be used without Drip Tray, however the Adjustable
Food Sensor setting
7
will not function without the Drip Tray.
Retractable Handheld Sealer Reservoir:
Empty Reservoir after each use.
Wash in warm soapy water. Air dry before replacing.
IMPORTANT:
To remove Reservoir from Retractable Handheld Sealer:
While holding top portion by hose pull clear Reservoir
down and off.
Care and Cleaning
CARE & CLEANING
Remove All Food
Around Gaskets
Push In
Tabs
Push In
Tabs
DO NOT
REMOVE
GASKETS
Slide out drawer to
access Drip Tray