User Manual

ManualsBrandsForce RC ManualsHobby1/10 Northwood 2.2 Scaler Brushed 4X4 RTR

NORTHWOOD

™

1/10 4WD SCALER

Frequency 2.4GHz

Run time 10-12 minutes

Included Battery 7.2V, 2000mAh NiMH

Charge Time 10 hours

Compatible Batteries 6 -7 cell NiCad/NiMH and 2 cell LiPo

SPECIFICATIONS

VEHICLE PREPARATIONS

CHARGING THE VEHICLE BATTERY

1. Connect the battery pack to the charger.

2. Connect the charger to an AC power source.

3. Allow the battery pack to charge for 10 hours.

CAUTION: If at any time during the charge process the

battery pack(s) becomes hot to the touch, unplug the

battery immediately and discontinue the charge process.

CHARGING WARNINGS

WARNING: Failure to exercise caution while using this

product and comply with the following warnings could

result in product malfunction, electrical issues, excessive heat,

FIRE, and ultimately injury and property damage.

• NEVER LEAVE CHARGING BATTERIES UNATTENDED.

• NEVER CHARGE BATTERIES OVERNIGHT.

• Read all safety precautions and literature prior to use of this

product.

• Never leave the battery and charger unattended during use.

• Never allow children under 14 years of age to charge battery

packs.

• Never attempt to charge dead or damaged batteries.

• Never charge a battery if the cable has been pinched or

shorted.

• Never allow batteries or charger to come into contact with

moisture at any time.

• Never charge batteries in extremely hot or cold places

(recommended between 50–80°F (10–26°C)) or place in direct

sunlight.

• Always use only Ni-MH rechargeable batteries. This charger

cannot charge batteries such as “heavy duty”, “alkaline”,

“mercury” or “lithium” battery.

• Always connect to the charger correctly.

• Always disconnect the battery and charger after charging and

let them cool between charges.

• Always inspect the battery before charging.

• Always terminate all processes and contact Horizon Hobby if

the product malfunctions.

• Always make sure you know the specifications of the

battery to be charged or discharged to ensure it meets the

requirements of this charger.

• Always constantly monitor the temperature of the battery

pack while charging.

• Always end the charging process if the charger or battery

becomes hot to the touch or starts to change form during the

charge process.

• Always charge in a well ventilated area.

The vehicle battery charger produces 200 milliAmps per hour.

Divide the mAh capacity on the label of a battery by 200 to

know how long battery charging will require. For example, a

fully discharged 2000mAh battery requires 10 hours to charge.

BOX CONTENTS

1. Force RC

Northwood

™

1/10 4WD Scaler (FCES03003)

2. Force RC

Pistol Grip Transmitter (FCES13008)

3. 200mA Battery Charger (DYNC1031)

4. Dynamite

Speedpack

2000mAh 7.2V Ni-MH battery

(DYNB0020)

5. AA batteries (4)