User Manual

NORTHWOOD

™

1/10 4WD SCALER

• Never install damaged batteries.

• Never install batteries of mixed types or of different ages in

the transmitter.

• Always remove exhausted batteries.

• Always remove batteries before storing the transmitter.

• Low battery power can result in loss of control of the RC

vehicle.

TRANSMITTER BATTERY SAFETY PRECAUTIONS

REMOVING AND INSTALLING

THE VEHICLE BODY

INSTALLING THE BATTERY IN THE VEHICLE

1. Install a fully charged battery into battery tray.

2. Secure with hook and loop strap.

3 Connect battery to ESC.

INSTALLING TRANSMITTER BATTERIES

1. Remove the battery cover from the bottom of the transmitter.

2. Obey the battery plus (+) and minus (-) diagram in the

transmitter to install 4 AA batteries.

3. Install the battery cover.

We recommend using only alkaline AA batteries in the

transmitter.

CAUTION: If using rechargeable batteries, charge only

rechargeable batteries. Charging non-rechargeable

batteries may cause the batteries to burst, resulting in injury to

persons and/or damage to property.