Use and Care Manual

ENGLISH

TECHNICAL SPECIFICATIONS

OPERATING INSTRUCTIONS

Product Features

The numbering of the product features refers to the illustration of the machine on

the graphics page

1. Saw blade

2. Adjustable footplate

3. Blade holder control button

4. Rubber sleeve

5. Body

6. Handle position adjustment switch

7. Speed adjustment dial

8. Power cord

9. Switch locking button

10. On/Off trigger switch

11. Handle

12. Orbital action button

13. Footplate adjustment button

Model PT100914

Voltage 120 V - 60 Hz

Protection class Class II /

Amperage 10 amp

No-load speed 500-2700 SMP

Tool holder TOOL-FREE

Stroke length 1-3/16” (30 MM)

Observe correct voltage! The voltage of the power source must comply

with the voltage specied on the name plate of the tool.

Switching On and Off

To start the tool, push the switch locking button (9) and then press the trigger

switch (10) and keep it pressed.

To switch off the tool, release the trigger switch (10)

Note: For safety reasons, the trigger switch (10) cannot be locked in the on

position; it must remain pressed during the entire cutting operation.

APPLICATION