Hub/Switch Configuration Guide

tagged
SFTOS Command Reference for the S2410, Version 2.4.1.0 131
Mode
Privileged Exec
Command
History
Example
Figure 34 Output of the show vlan port Command
tagged
This command sets tagging to enabled for a specific port (or range of ports) in the selected
VLAN. If tagging is enabled, traffic is transmitted as tagged frames.
Syntax
tagged unit/slot/port
The unit/slot/port is a valid interface belonging to the VLAN.
To remove tagging from the interface, use the
no tagged command (not untagged). If
tagging is disabled, traffic is transmitted as untagged frames.
Mode
Interface VLAN
Command
History
Parameters
unit/slot/port
Enter interface in unit/slot/port format for retrieving information about
the associated interface.
all Enter all for retrieving information about all interfaces.
Version 2.1 Introduced
Force10-S50 #show vlan port 1/0/1
Port Acceptable Ingress Default
Interface VLAN ID Frame Types Filtering GVRP Priority
--------- ------- ------------ ----------- ------- --------
1/0/1 1 Admit All Enable Disable 0
Protected Port .............................. False
Force10-S50 #show vlan port all
Port Acceptable Ingress Default
Interface VLAN ID Frame Types Filtering GVRP Priority
--------- ------- ------------ ----------- ------- --------
1/0/1 1 Admit All Enable Disable 0
1/0/2 1 Admit All Enable Disable 0
1/0/3 1 Admit All Enable Disable 0
1/0/4 1 Admit All Enable Disable 0
1/0/5 1 Admit All Enable Disable 0
1/0/6 1 Admit All Enable Disable 0
1/0/7 1 Admit All Enable Disable 0
1/0/8 1 Admit All Enable Disable 0
1/0/9 1 Admit All Enable Disable 0
1/0/10 1 Admit All Enable Disable 0
1/0/11 1 Admit All Enable Disable 0
!------------output truncated------------------!
Version 2.3 Introduced