Hub/Switch Configuration Guide

show port-security dynamic
SFTOS Command Reference for the S2410, Version 2.4.1.0 167
Example
Figure 39 Example of show port-security all Command Output
•
•
show port-security dynamic
This command displays the dynamically locked MAC addresses for port.
Syntax
show port-security dynamic unit/slot/port
Mode
Privileged Exec
The one report field is:
MAC Address — MAC address of the dynamically locked MAC
Force10 #show port-security all
Admin Dynamic Static Violation
Intf Mode Limit Limit Trap Mode
--------- ------- ---------- --------- ----------
1/0/1 Disabled 600 20 Disabled
1/0/2 Disabled 600 20 Disabled
1/0/3 Disabled 600 20 Disabled
1/0/4 Disabled 600 20 Disabled
1/0/5 Disabled 600 20 Disabled
1/0/6 Disabled 600 20 Disabled
1/0/7 Disabled 600 20 Disabled
1/0/8 Disabled 600 20 Disabled
1/0/9 Disabled 600 20 Disabled
1/0/10 Disabled 600 20 Disabled
1/0/11 Disabled 600 20 Disabled
1/0/12 Disabled 600 20 Disabled
1/0/13 Disabled 600 20 Disabled
1/0/14 Disabled 600 20 Disabled
1/0/15 Disabled 600 20 Disabled
1/0/16 Disabled 600 20 Disabled
1/0/17 Disabled 600 20 Disabled
1/0/18 Disabled 600 20 Disabled
--More-- or (q)uit
--!output deleted!--
Force10#
Related
Commands
show port-security dynamic Displays the dynamically locked MAC addresses for port
show port-security static Displays the statically locked MAC addresses for port
show port-security violation Displays the source MAC address of the last packet that was
discarded on a locked port