Hub/Switch Configuration Guide

198 Security Commands

show ip http

This command displays the HTTP settings for the switch.

Syntax

show ip http

Mode

Privileged Exec

The report fields are:

HTTP Mode (Unsecure) — This field indicates whether basic HTTP is enabled or

disabled on the switch.

HTTP Mode (Secure) — This field indicates whether the administrative mode of secure

HTTP (HTTPS) is enabled or disabled on the switch.

Java Mode — This field indicates whether Java mode is enabled or disabled on the

switch.

Secure Port—This field specifies the port configured for SSLT.

Secure Protocol Level—The protocol level may have the values of SSL3, TSL1, or both

SSL3 and TSL1.

Example

Figure 45 Example of show ip http Command Output

Force10 #show ip http

Java Mode: Disabled

HTTP Mode (Unsecure): Disabled

HTTP Mode (Secure): Disabled

Secure Port: 443

Secure Protocol Level(s): TLS1 SSL3

Force10#