Hub/Switch Configuration Guide

show serial
SFTOS Command Reference for the S2410, Version 2.4.1.0 93
Table 14 Fields of show serial Command Output
Field Description
Serial Port Login Timeout (minutes) Specifies the time, in minutes, of inactivity on a serial
port connection, after which the switch will close the
connection. Any numeric value between 0 and 160 is
allowed, the factory default is 5. A value of 0 disables
the timeout
Baud Rate The default baud rate at which the serial port will try to
connect. The available values are 1200, 2400, 4800,
9600, 19200, 38400,57600, and 115200 baud (bps).
The factory default is 9600
Character Size The number of bits in a character. The number of bits is
always 8.
Flow Control Whether hardware flow control is enabled or disabled. It
is always disabled.
Stop Bits The number of stop bits per character. The number of
stop bits is always 1.
Parity The parity method used on the serial port. The parity
method is always None.