Hub/Switch Configuration Guide

snmp-server community ro
SFTOS Command Reference for the S2410, Version 2.4.1.0 99
status is changed back to Enable.The no version of this command deactivates an SNMP
community. If the community is disabled, no SNMP requests using this community are
accepted. In this case the SNMP manager associated with this community cannot manage the
switch until the Status is changed back to Enable.
Syntax
[no] snmp-server community mode name
Default
Enable
Mode
Global Config
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also
called public).
Syntax
snmp-server community ro name
Mode
Global Config
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also
called private).
Syntax
snmp-server community rw name
Mode
Global Config
snmp-server enable traps bcaststorm
This command enables the sending of Broadcast Storm traps.
Syntax
[no] snmp-server enable traps bcaststorm
The no version of this command disables the sending of Broadcast Storm traps.
Default
enabled