Instruction Manual

VALD ForceDecks Instruction Manual v.1.2022
11
5.3 Bluetooth Connection
ForceDecks plates (FDMini, LDLite (V2), FDMax) can be connected to a laptop via Bluetooth.
Note: To enable Bluetooth connectivity the latest ForceDecks Firmware must be installed, and only one
set of ForceDecks plates turned on.
To connect ForceDecks plates to a laptop or iOS device via Bluetooth:
0. Log in to ForceDecks
1. Click on Options
2. Select Settings
3. Select the Platform tab
4. Click on ForceDecks
5. Change connection types to: Prefer Bluetooth Device Connection
6. Click Save
6 Using ForceDecks
The VALD Knowledge Base at support.vald.com has detailed information, guides, how-to resources,
and answers to FAQs.
For detailed instructions to operate the ForceDecks system please visit out website at:
https://support.vald.com/hc/en-au/categories/4421397081625-ForceDecks
7 Safety, Care and Maintenance
ForceDecks have no planned maintenance or servicing requirements, however it is best practice to
go through the zeroing process before every testing session. (Refer Zeroing section 7.2)
It is also recommended users follow the below care guidelines:
• Keep liquids away from the plates and cables.
• When transporting the plates, ensure the plates are well padded, with no forces being
exerted on the plates.
• Avoid any accumulation of dirt, mud or other residues on the plates.