Owner's Manual

83
[IP01484(B F )03/95]
NORM A/C
*
[IP01485(B F )02/95]
Select NORM A/C to get refrigerated outside air
through the instrument panel registers. The A/C
position is used for cooling except when it is
extremely hot or fast cooling of the vehicle is
needed. Then, select MAX A/C for fast cooling
and return to NORM A/C when you are
comfortable.
*
[IP01486(B F )03/95]
MAX A/C
*
[IP01487(B F )04/95]
The MAX A/C position produces cool air more
rapidly to provide faster cooling of your vehicle.
This is possible because cooler air is drawn from
inside the passenger area and refrigerated again
instead of using warmer outside air. Using
inside air will also make the fan sound louder
which is normal when using MAX A/C. The air
flow will be from the instrument panel registers.
*
[IP01488(B F )03/95]
FLOOR
*
[IP01489(B F )05/94]
Air flow will be to the floor when FLOOR is
selected. The air cannot be cooled in the FLOOR
position but can be heated by rotating the center
knob in the RED area.
*
[IP01490(B F )03/95]
MIX
*
[IP01491(B F )05/94]
Select MIX to get air to the floor and windshield
defrosters at the same time. If the outside
temperature is about 50˚ (10˚C) or warmer, the
air will also be dehumidified to remove
moisture. This feature will help prevent fogging
in humid weather. The air can be cooled or
heated.
*
[IP01492(B F )03/95]
V DEF
[IP01493(B F )05/95]
Select V DEF to obtain maximum air flow to
the windshield. Rotate the center knob into the
RED area for the air temperature required to
defrost. When the outside air temperature is
File:ltipf.ex
Update:Thu May 9 15:21:29 1996