File:ltpif.
File:ltpif.
File:ltpif.ex Update:Thu May 9 15:22:45 1996 *[PI02300( ALL)05/95] Table of Contents Introductory Information ............................... 1 Safety Restraints ............................................ 11 Starting Your F-Series .................................. 49 Warning Lights and Gauges ....................... 63 Instrument Panel Controls .......................... 79 Steering Column Controls .......................... 95 Features ..........................................................
File:ltinf.ex Update:Thu May 9 15:20:54 1996 Introductory Information *[IN00300( ALL)04/95] *[IN00400( ALL)04/95] Ford’s Commitment to You At Ford Motor Company, excellence is the continuous commitment to achieve the best result possible. It is dedication to learning what you want, determination to develop the right concept, and execution of that concept with care, precision, and attention to detail. In short, excellence means being the standard by which others are judged.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 *[IN01000( ALL)04/95] ❑ Integrity is never compromised. Our conduct *[IN01100( ALL)04/95] Things to Know About Using This Guide *[IN01112(BEF )04/95] Congratulations on the purchase of your new vehicle. This guide has information about the equipment and the options for your new vehicle. You may not have bought all of the options available to you. If you do not know which information applies to your vehicle, talk to your dealer.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 *[IN01600( ALL)04/95] Finding Information in This Guide [IN01700( ALL)04/95] After you have read this guide once, you will probably return to it when you have a specific question or need additional information. To help you find specific information quickly, you can use the table of contents or the index.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 % *[IN02600( ALL)01/95] *[IN02700(BEF )04/95] About the Warranties Your vehicle is covered by three types of warranties: Basic Vehicle Warranty, Extended Warranties on certain parts, and Emissions Warranties. % Read your Warranty Information Booklet carefully to find out about your vehicle’s warranties and your basic rights and responsibilities. *[IN03250( ALL)03/95] If you lose your Warranty Information Booklet, you can get a new one free of charge.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 *[IN04600( EF )06/92] *[IN04750( F )11/89] Special Notices *[IN04800( F )11/89] As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or an accident. Be sure to read the Additional Special Driving Instructions for Four-Wheel Drive Vehicle Operators, in this book and the special supplement included with four-wheel drive vehicles entitled 4-Wheeling with Ford.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 rear edge of the driver’s door. You can determine whether the ambulance manufacturer followed Ford’s recommendations by directly contacting that manufacturer. NOTE: Ford Ambulance Preparation Package is only available on certain 7.3L Diesel Econoline and F-Series vehicles. *[IN05050( EF )02/89] NOTICE TO OWNERS OF DIESEL-POWERED VEHICLES *[IN05070( EF )04/89] Read the 7.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 *[IN05500(BEF )05/95] % ❑ on the Safety Compliance Certification Label — this label is attached to the left front door lock facing or the door latch post pillar. It is required by the National Highway Traffic Safety Administration and is made of special material. If someone tampers with it, it will be destroyed and/or a destruction pattern will appear.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 require additional equipment for the way you intend to use the vehicle. It is the responsibility of the registered owner to determine the applicability of such laws and regulations to your intended use for the vehicle, and to arrange for the installation of required equipment. Your Ford dealer has information about the availability of many items of equipment which may be ordered for your vehicle.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 *[IN06800(BEF )01/95] ❑ Use only the type of engine oil that Ford % *[IN07100(BEF )04/95] Cleaning the Outside of Your Vehicle *[IN07200(BEF )04/95] *[IN07300(BEF )04/95] Washing and Polishing Your Vehicle *[IN07400(BEF )04/95] *[IN07500(BEF )04/95] *[IN07600(BEF )04/95] DO NOT: *[IN07700(BEF )04/95] *[IN07800(BEF )05/95] ❑ Wash your vehicle while the body is hot % % recommends. See Engine oil recommendations in the Index.
File:ltinf.ex Update:Thu May 9 15:20:54 1996 *[IN08200(BEF )04/95] *[IN08300(BEF )04/95] Cleaning Chrome and Aluminum Parts *[IN08400(BEF )04/95] *[IN08500(BEF )04/95] Cleaning Plastic Parts *[IN08600(BEF )04/95] Do not clean plastic parts with thinners, solvents or petroleum-based cleaners. % % *[IN08700(BEF )04/95] % Wash chrome and aluminum parts with the same detergent you use to wash the vehicle body, such as Ford Premium Car Wash Concentrate.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 Safety Restraints *[SR00500(BEF )04/95] *[SR00600(BEF )03/95] Important Safety Belt Information The use of safety belts helps to restrain you and your passengers in case of a collision. In most states and in Canada the law requires their use.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR02400(BEF )05/95] RWARNING Passengers should not be allowed to ride in the cargo area. Persons not riding in a seat with a fastened seat belt are much more likely to suffer serious injury in a collision. Cargo should always be secured to prevent it from shifting and causing damage to the vehicle or harm to passengers. *[SR02500(BEF )05/95] RWARNING Never let a passenger hold a child on his or her lap while the vehicle is moving.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR02900(BEF )05/95] RWARNING Lock the doors of your vehicle before driving to lessen the risk of the door coming open in a collision. [SR02910( EF )04/95] Your vehicle is equipped with a dual locking mode retractor on the shoulder belt portion of the combination lap/shoulder safety belt for front seat passenger and rear seat outboard passengers.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR03030(BEF )04/95] To switch the retractor from the “emergency locking mode” to the “automatic locking mode,” perform the following steps: [SR03040(BEF )04/95] 1. Buckle the lap/shoulder combination belt. [SR03050(BEF )04/95] 2. Grasp the shoulder portion of the belt and pull downward until all of the belt is extracted, and when allowed to retract, a clicking sound will be heard.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR03135(BEF )05/95] After you get into your vehicle, close the door and lock it. Then adjust the seat to the position that suits you best. [SR03137(BEF )05/95] To fasten the belt *[SR03140(BEF )05/95] Pull the combination lap/shoulder belt from the retractor so that the shoulder portion of the belt crosses your shoulder and chest. Be sure the belt is not twisted. If it is, remove the twist.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR03165(BEF )05/95] To tighten the lap portion of the belt, pull up on the shoulder belt until it fits you snugly. The belt should rest as low on your hips as possible. [SR03175(BEF )05/95] RWARNING Use the shoulder belt on the outside shoulder only. Never wear the shoulder belt under the arm. Never swing it around the neck over the inside shoulder. Never use a single belt for more than one person.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR07400(BEF )05/95] one third page art:0020638-C Fastening occupant safety lap belts [SR07500(BEF )04/95] To fasten the belt, pull the belt across your hips and insert the tongue into the correct buckle on your seat until you hear a snap and feel it latch. Make sure the buckle is securely fastened by pulling tongue.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR08550( EF )05/95] one third page pica art:0020639-D Unfastening the outboard lap/shoulder belts [SR08650(BEF )05/95] 2. *[SR08800(BEF )03/95] How to Untwist or Unjam a Safety Belt Retractor *[SR08900(BEF )03/95] If you should jam the lap belt retractor by allowing the belt to retract when it is twisted, you can free the webbing with this procedure: *[SR09000(BEF )03/95] 1. Pull on the belt with both hands to tighten it on the retractor spool.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR09505(BEF )05/95] Procedure to Correct a Twisted Safety Shoulder Belt at the “D” Ring (if so equipped) Front and/or Rear Outboard Seating Positions [SR09507(BEF )05/95] NOTE: The restraint system shown in the following figures may be different than the restraint system in your vehicle. However, use these figures and this procedure to correct a twisted safety shoulder belt at any outboard seating position that has a “D” ring.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 1. Grasp the belt webbing at the “D” ring. See Figure 2. [SR09525(BEF )05/95] 2. Rotate and fold the belt webbing over itself as required to remove the twist. [SR09527(BEF )05/95] 3. Feed the folded portion of the belt through the “D” ring.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR09530(BEF )05/95] 4. When completed, the safety belt should look like Figure 3. [SR09535(BEF )05/95] half page art:0060600-D *[SR09600(BEF )05/95] *[SR09700(BEF )05/95] Safety Belt Extension Assembly *[SR09750(BEF )05/95] Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR09800(BEF )05/95] RWARNING Failure to follow these instructions will affect the performance of the safety belts and increase the risk of personal injury. % Safety Belt Maintenance [SR10000(BEF )02/95] Check your safety belt system periodically to make sure that it works properly and isn’t damaged. If the webbing shows any wear, nicks or cuts, have it examined by a qualified technician to determine if replacement is necessary.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR10300(BEF )04/95] Air Bag Supplemental Restraint System (SRS) *[SR10450( F )06/93] Driver air bag (F-150 — F-250 under 8500 lbs. only) *[SR10500(B F )03/95] Your vehicle is equipped with a driver side air bag supplemental restraint system located in the steering wheel and identified by the letters “SRS” in the center of the wheel.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR10900(BEF )01/95] There are four very important reasons to use safety belts even with an air bag system.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 % How the Air Bag Supplemental Restraint System Operates *[SR11900(BEF )10/94] The air bag supplemental restraint system has two main parts. One part is the air bag system with the driver air bag and inflator located in the center of the steering wheel. The second part is the electrical system, which has impact sensors, and a diagnostic module, and backup power supply.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR12200(BEF )05/95] The air bag system uses a readiness light and a tone to indicate the condition of the system. The readiness light is in the instrument cluster. When you turn the ignition to the ON position, this light will illuminate for approximately six (6) seconds and then turn off. This indicates that the system is operating normally. NOTE: Maintenance of the air bag system is not required.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR12700(BEF )04/95] The air bag system is designed to stay out of sight until it is activated. The air bag system is designed to deploy in frontal and front-angled collisions more severe than hitting a parked vehicle of similar size and weight head-on at about 28 mph (45 km/h). Because the system senses the crash severity rather than vehicle speed, some frontal collisions at speeds above 28 mph (45 km/h) will not inflate the air bag.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR12820(BEF )03/95] 4. *[SR12840(BEF )03/95] The surface of the air bags and the vehicle interior may be dusted with a powdery residue. The powder is cornstarch or talcum powder, which is used to lubricate the air bag as it inflates, and sodium compounds such as sodium carbonates (e.g., baking soda), and possibly a very small amount of sodium hydroxide that may be irritating to the skin and eyes, but is not toxic.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR13000(BEF )03/93] half page art:0011063-A Inflated driver side air bag *[SR13500(BEF )05/95] RWARNING If the air bag is inflated, THE AIR BAG WILL NOT FUNCTION AGAIN AND MUST BE REPLACED IMMEDIATELY. If the air bag is not replaced, the unrepaired area will increase the risk of injury in a collision.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR13600(BEF )03/95] Disposal of supplemental air bag equipped vehicles *[SR13700(BEF )03/95] For disposal of air bags or air bag equipped vehicles, see your local Ford or Lincoln-Mercury dealer, or refer to the procedures in the 1995 Ford Service Manual. Information on how to order a service manual is available at an authorized Ford or Lincoln-Mercury dealer.
File:ltsrf.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR14200(BEF )02/94] one third page art:0010605-D Label on radiator support in the engine compartment % *[SR14300(BEF )05/95] *[SR14400(BEF )02/95] Safety Restraints for Children In the U.S. and Canada, you are required by law to use safety restraints for children.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR14600(BEF )05/95] RWARNING Passengers should not be allowed to ride in the cargo area. Persons not riding in a seat with a fastened seat belt are much more likely to suffer serious injury in a collision. Cargo should always be secured to prevent it from shifting and causing damage to the vehicle or harm to passengers.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR15025(BEF )05/95] RWARNING Never leave a child unattended in your vehicle. *[SR15250(BEF )05/95] *[SR15300(BEF )05/95] % Safety Belts for Children Children who are too large for child safety seats should always wear safety belts. (See instructions with your child seat, or contact its manufacturer, to determine maximum size of child that will safely fit in the seat.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR15800(BEF )05/95] RWARNING To reduce the risk of serious injury in a collision, children should always ride with the seatback upright. *[SR15900(BEF )01/95] *[SR16000(BEF )05/95] Safety Seats for Children *[SR16015(BEF )02/95] Ford recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position which is capable of providing a tether anchorage.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR16200(BEF )05/95] RWARNING Carefully follow all of the manufacturer’s instructions included with the safety seat you put in your vehicle. If you do not install and use the safety seat properly, the child may be injured in a sudden stop or collision. *[SR16250(BEF )10/94] RWARNING Seatbacks should be upright for use with child safety seats.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR16280(BEF )05/95] half page art:0021377-B [SR16300(BEF )04/95] Installing Child Safety Seats [SR16305( F )04/95] Your vehicle is equipped with a dual locking mode retractor on the shoulder belt portion of the combination lap/shoulder safety belt for the front seat passenger and a dual-locking mode retractor for rear outboard passengers.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR16355(BEF )04/95] half page art:0011238-B *[SR16360(BEF )04/95] 3. 38 While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. See Figure 2. Be sure that the belt webbing is not twisted.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR16365(BEF )04/95] half page art:0011239-B Routing the lap/shoulder belt *[SR16370(BEF )04/95] 4. Insert the belt tongue into the buckle for that seating position until you hear and feel the latch engage. Figure 3. Make sure tongue is latched securely to buckle by pulling on tongue.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR16375(BEF )04/95] half page art:0011240-B Buckling the belt *[SR16380(BEF )04/95] 5. *[SR16385(BEF )04/95] NOTE: The dual-locking mode retractor must be in the automatic locking mode to properly restrain a child. 40 Grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. At this time, the retractor is in the automatic locking mode (child seat restraint mode). Figure 4.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR16390(BEF )04/95] half page art:0011241-A Setting the retractor to automatic locking mode *[SR16395(BEF )04/95] 6. Allow the belt to retract. Pull up on the shoulder webbing. A clicking sound will be heard as the belt retracts. This indicates the retractor is in the automatic locking mode. Push down on the child seat while you pull up on the belt to remove any slack in the belt. Figures 5 and 6.
File:ltsrf.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR16410(BEF )04/95] 7. Before placing the child in the child seat, forcibly tilt the seat from side to side, and tug it forward to make sure that the seat is securely held in place, Figure 7.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR16415(BEF )04/95] 8. Double check that the retractor is in the automatic locking mode. Try to pull more belt out of the retractor. If you cannot, the belt is in the automatic locking mode, Figure 8. *[SR16420(BEF )04/95] half page art:0011245-B Checking the retractor *[SR16425(BEF )04/95] 9.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 [SR16440(BEF )04/95] Installing a Child Safety Seat at the Rear Center Seating Position with Locking Adjustable Lap Belt [SR16450(BEF )04/95] 1. Lengthen the lap belt. To lengthen the belt, hold the tongue so that its bottom is perpendicular to the direction of webbing while sliding the tongue up the webbing. [SR16455(BEF )04/95] 2. Place the child safety seat in the center seating position. [SR16460(BEF )04/95] 3.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR18400(BEF )04/95] *[SR18410(BEF )03/01] Attaching Safety Seats With Tether Straps [SR18413(BEF )02/95] Some manufacturers make safety seats that include an upper tether strap that goes over the seatback and attaches to an anchoring point. Other manufacturers offer the tether strap as an accessory. Contact the manufacturer of your child safety seat for information about ordering a tether strap.
File:ltsrf.ex Update:Thu May 9 15:26:26 1996 *[SR19100( F )12/91] If a tethered seat is installed in the front seat, Ford recommends placement of the tethered safety seat in the center front seating position, with the tether strap secured to the center rear lap belt tongue or to the webbing of the buckled center rear lap belt behind the child safety seat. *[SR19400(B F )04/95] The rear lap/shoulder safety belts should not be used to secure the tether strap of a safety seat located in the front seat.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 Starting Your F-Series *[ST01700( ALL)03/95] % [ST01800( ALL)01/95] * *[ST02000( ALL)05/90] Ignition Understanding the Positions of the Ignition quarter page art:0020004-B The positions of the key in the ignition lock cylinder. *[ST02200( ALL)03/95] ON allows you to test your vehicle’s warning lights (except the brake system warning light) to make sure they work before you start the engine.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST02600(B F )05/95] RWARNING LOCK position does not lock the gearshift on floor-mounted gearshifts. If the parking brake is not set and the gearshift is moved out of Park (automatic transmission) or out of gear (manual transmission), your vehicle may move unexpectedly. [ST02635(B F )05/95] With the transfer case in N (Neutral), the vehicle is free to move with either the automatic transmission in P (Park) or with the manual transmission in any driving gear.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST03025(BEF )03/91] *[ST03050(BEF )03/91] Ignition Key Buzzer or Chime *[ST03075( ALL)02/95] *[ST03100(B F )03/91] Removing the Key From the Ignition *[ST03115(B F )05/91] If you have a manual transmission, you have a key release lever which allows you to remove your key from the ignition. The key release lever is on the upper right of the steering column, just above the key lock cylinder. The lever says PUSH.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST03700( ALL)03/95] *[ST03800(B F )03/91] 4. Remove the key. *[ST03950(B F )03/95] *[ST04000(B F )03/91] *[ST04100(B F )05/91] 1. Put the gearshift in 1 (First). 2. Turn the ignition key to OFF. 3. Set the parking brake fully before removing your foot from the service brake. *[ST04200(B F )06/92] *[ST04300(B F )10/90] *[ST04400(B F )03/95] *[ST04600(B F )05/95] 4. Push and hold in the key release button. 5. Turn the key to LOCK. 6.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST04750( ALL)01/93] RWARNING Do not leave children, unreliable adults, or pets alone in your vehicle. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Further, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe and possibly fatal injuries to people as well as animals.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST05100(BEF )03/95] If you do not let the engine relearn its idle, the idle quality of your vehicle may be adversely affected until the idle is relearned. Your vehicle will eventually relearn its idle while you drive it, but it takes much longer than if you use the previous procedure.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST05900(BEF )03/95] *[ST06015(BEF )03/95] Testing the Warning Lights *[ST06025(BEF )03/95] If your Brake Warning Light does light up with the key in the ON position, you may not have fully released the parking brake or the brake fluid may be low. *[ST06200( ALL)02/95] *[ST06300( ALL)02/95] *[ST06400( ALL)05/95] Starting Your Engine 1. Follow the steps under Preparing to Start Your Vehicle at the beginning of this section.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST06520( ALL)04/95] ❑ At temperatures above 10˚F (-12˚C): If the *[ST06551( ALL)04/95] ❑ Do not hold the key in the START position *[ST06550( ALL)04/95] *[ST06551( ALL)04/95] For a warm engine: *[ST06575( ALL)04/95] Whenever you start your vehicle, release the key as soon as the engine starts. Excessive cranking could damage the starter or flood the engine. *[ST06601( ALL)04/95] After you start the engine, let it idle for a few seconds.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST06633( ALL)01/95] 4. Apply the brake pedal and shift to N (Neutral). (If the vehicle is shifted to P (Park), you must repeat the previous steps.) *[ST06635( ALL)01/95] *[ST06637( ALL)05/95] 5. Start the vehicle. If you need to shift out of P (Park) by using the alternate procedure described above, it is possible that a fuse has blown and that your brakelamps may also not be functional.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST07300(BEF )05/95] A computer system controls the engine’s idle speed. When you start your vehicle, the engine’s idle speed normally runs higher than when it’s warmed up. These faster engine speeds will make your vehicle move slightly faster than its normal idle speed. It should, however, slow down after a short time. If it does not, have the idle speed checked.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST08000(BEF )05/95] RWARNING To prevent electrical shock, do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters. *[ST08100(BEF )03/95] For best results, plug the heater in at least three hours before you start your vehicle. Using the heater for longer than three hours will not damage the engine, so you can plug it in at night to start your vehicle the following morning.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST08210(B F )03/95] one third page art:0020005-C Fuel pump shut-off switch location *[ST08250( F )02/95] NOTE: Refer to the Motorhome Class A Chassis Owner Guide for information regarding the fuel pump shut-off switch for your motorhome chassis. *[ST08260( ALL)05/95] RWARNING If you see or smell fuel, do not reset the switch or try to start your vehicle.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST08330( ALL)03/95] 5. Check under the vehicle again for leaking fuel. If you see or smell fuel, do not start your vehicle again. If you do not see or smell fuel, you can try to start your vehicle again. *[ST08340( ALL)03/95] 6. Check all vehicle warning lights before driving your vehicle.
File:ltstf.ex Update:Thu May 9 15:26:52 1996 *[ST09900( ALL)01/95] Have the exhaust and body ventilation systems checked whenever: *[ST10000( ALL)02/95] *[ST10100( ALL)02/95] *[ST10200( ALL)01/95] *[ST10300( ALL)01/95] ❑ your vehicle is raised for service ❑ the sound of the exhaust system changes ❑ your vehicle has been damaged in a collision Improve your ventilation by keeping all air inlet vents clear of snow, leaves, and other debris.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 Warning Lights and Gauges *[LG00400( ALL)01/95] The instrument panel (dashboard) on your vehicle is divided into several different sections. The illustrations on the following pages show the major parts of the instrument panel that are described in this chapter. Some items shown may not be on all vehicles.
File:ltlgf.
File:ltlgf.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG03000( ALL)06/94] *[LG03100( ALL)06/93] The Mechanical Cluster The following warning lights and gauges are on the mechanical cluster. All of the warning lights and gauges alert you to possible problems with your vehicle. Some of the lights listed are optional. The following sections detail what each of these indicators means.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG03800(BEF )02/95] *[LG03925(BEF )03/03] Anti-Lock Brake System Warning Light *[LG03950(BEF )06/94] NOTE: If it does not glow momentarily, have your vehicle’s electrical system checked immediately. *[LG03985(BEF )07/94] NOTE: If the ABS brake warning light begins to flash in a repeatable flash sequence, check the rear anti-lock system continuous power fuse and brake lights for proper operation.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG04150(BEF )02/95] *[LG04301(BEF )03/95] Safety Belt Warning Light and Chime *[LG04325(BEF )03/95] ❑ If the safety belt is not buckled when the key *[LG04351(BEF )02/95] ❑ If the safety belt is buckled while the light is *[LG04365(BEF )05/95] ❑ If the safety belt is buckled before the This warning light and chime remind you to fasten your safety belt.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG04550( ALL)05/95] one inch art:0020048-A Check engine warning light symbol *[LG04575( ALL)05/95] Modification or additions to the vehicle may cause incorrect operation of the OBD II system. Additions such as burglar alarms, cellular phones, and CB radios must be carefully installed. Do not install these devices by tapping into or running wires close to powertrain control system wires or components.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG04662( F )05/95] NOTE: If your light truck is equipped with dual fuel tanks, the “CHECK ENGINE” light may come on if fuel is restricted to the engine or if the fuel flow is momentarily disrupted because of an empty fuel tank before you switched to the auxiliary fuel tank. This condition is normal and the light should go off after full fuel flow is restored.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG04750( ALL)05/95] After completing the three consecutive warm up cycles and on the fourth engine start up, the Check Engine Warning Light should turn off. If the light does not go off after the fourth engine restart, have your vehicle serviced by your dealer or a qualified technician.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 [LG06320(B F )05/95] one inch art:0000653-C Supplemental air bag readiness light *[LG06400( ALL)05/94] *[LG06601( ALL)05/94] Battery Voltage Gauge (Voltmeter) *[LG06700( ALL)11/89] If you are running electrical accessories (when the engine is off, or idling at a low speed), the pointer may move toward the lower end of the normal band. If it stays outside the normal band area, have your vehicle’s electrical system checked as soon as it is safely possible.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG07500( ALL)05/94] *[LG07601( ALL)06/93] Engine Oil Pressure Gauge *[LG07701( ALL)03/95] *[LG07801( ALL)01/95] *[LG07901( ALL)04/95] If you lose engine oil pressure: This gauge indicates the engine’s oil pressure, not the oil level. However, if your engine’s oil level is low, it could affect the oil pressure. With the engine running, the pointer should move into the NORMAL band.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG08900( ALL)01/95] *[LG09001( ALL)03/95] High Beam Light This light comes on when the headlamps are turned on high beam or when you flash the lights. *[LG09025( ALL)11/89] one inch art:0020537-B High beam indicator light *[LG09300(BEF )03/95] *[LG09400(BEF )03/95] “Headlamps On” Alert Chime *[LG09500( ALL)01/95] *[LG09700( ALL)06/93] Fuel Gauge *[LG09860( ALL)06/93] The fuel gauge indicator may vary slightly when the vehicle is in motion.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG11100( ALL)01/95] *[LG11201( ALL)03/95] Engine Coolant Temperature Gauge *[LG11301( ALL)02/95] The pointer moves from the C (cold) mark into the Normal band as the engine coolant warms up. It is acceptable for the pointer to fluctuate within the Normal band under normal driving conditions. Under certain driving conditions, such as heavy stop and go traffic or driving up hills in hot weather, the pointer may indicate at the top of the Normal band.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG12350(B F )03/93] quarter page art:0020535-D Engine coolant temperature gauge *[LG12601( ALL)01/95] *[LG12700( ALL)01/95] Speedometer *[LG12750(BEF )04/95] Your vehicle contains a speedometer which receives its input from the Anti-Lock brake sensor. The speedometer is also used to provide a speed signal for correct operation of the vehicle’s Powertrain Control Module (PCM), electronic transmission, and speed control (if so equipped).
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG12756(B F )05/95] If you are experiencing an “engine cut-out” condition at high speeds, it may be the result of this limiting device. It is a normal condition and can be avoided by reducing vehicle/engine speed. *[LG12770(B F )03/93] one third page art:0020871-C Speedometer *[LG13130( ALL)10/92] *[LG13160( ALL)10/92] Odometer/Trip Odometer The Liquid Crystal Display (LCD) odometer is a combination trip odometer and total odometer.
File:ltlgf.ex Update:Thu May 9 15:22:28 1996 *[LG13200(B F )05/95] *[LG13300(B F )05/95] Tachometer (If equipped) *[LG13400(B F )05/95] The tachometer may move slightly when the key is placed in the ACC or ON position, with the engine off. This is normal and does not affect the performance of the tachometer when the engine is running. *[LG13525(B F )05/95] Some vehicles are equipped with an engine speed (RPM) limiting device contained within the Powertrain Control Module (PCM).
File:ltipf.ex Update:Thu May 9 15:21:29 1996 Instrument Panel Controls *[IP00450( EF )05/90] NOTE: The following section does not apply to Stripped Chassis vehicles. See your Body Builder’s instructions for location and operation of controls for climate control systems, lamps, radio and windshield wiper/washer.
File:ltipf.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP00500(BEF )01/95] *[IP00601(BEF )12/91] *[IP00801(BEF )10/93] *[IP00950(B F )04/95] The Climate Control Systems Your vehicle is equipped with a control assembly designed to handle either a combination A/C-Heater System or a Heater-Only System. Instrument Panel Registers There are four registers in the instrument panel.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP01476(B F )03/95] To turn your air conditioner and heater system on, select any position except OFF. This will turn the fan on and allow airflow into the vehicle. To turn your air conditioner and heater off, select OFF. This will turn the fan off and stop airflow from coming into the vehicle.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 [IP01484(B F )03/95] NORM A/C *[IP01485(B F )02/95] Select NORM A/C to get refrigerated outside air through the instrument panel registers. The A/C position is used for cooling except when it is extremely hot or fast cooling of the vehicle is needed. Then, select MAX A/C for fast cooling and return to NORM A/C when you are comfortable.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 about 50˚F (9˚C) or warmer, the air will be dehumidified to remove moisture. The air can be cooled or heated. Rotate the H knob on the left to increase the air flow. *[IP01494(B F )05/94] *[IP01495(B F )02/95] Operating Tips *[IP01496(B F )05/95] ❑ In humid weather, select V DEF.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP01510(B F )05/94] one third page art:0020096-D *[IP01515(B F )05/95] To turn your Heater system on, select any position except OFF. This will turn the fan ON and allow air flow into the vehicle. Select OFF to turn your Heater off. This will turn the fan off and stop outside air from coming into the vehicle.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 dots and HI beside the H control knob. The HI position provides the most air flow. *[IP01540(B F )03/95] *[IP01542(B F )03/95] *[IP01545(B F )02/95] Air flow selections *[IP01550(B F )03/95] *[IP01555(B F )05/94] FLOOR *[IP01560(B F )03/95] *[IP01563(B F )05/94] MIX *[IP01565(B F )03/95] *[IP01570(B F )04/95] *[IP01575(B F )05/94] *[IP01580(B F )02/95] [IP01585(B F )04/95] VENT Use VENT to bring outside air through the instrument panel registers.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 [IP01590(B F )02/95] ❑ Do not put objects under the front seats that will interfere with the flow of air under the seats to the back seat area of your vehicle. *[IP01595(B F )02/95] ❑ Remove any snow, ice, or leaves from the air intake area at the bottom of the windshield.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP16300( F )03/91] *[IP16400( F )03/91] Dual Fuel Tank Selector Switch *[IP16501( F )03/91] To choose which fuel tank that you want your engine to draw fuel from (front or rear) you must use this switch. Your fuel gauge will display the amount of fuel available in the currently selected tank. *[IP16601( F )03/91] The fuse that protects the fuel tank selector circuit is labeled AUX FUEL TANK SELECTOR on your fuse panel cover.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 The Interior and Exterior Lights *[IP16800(BEF )01/95] *[IP16900( ALL)01/95] *[IP17000( ALL)02/95] Turning On the Exterior Lights *[IP17100( ALL)06/94] 1. Pull the headlamp control knob toward you to the first position. Parking lamps, tail lamps and marker lamps are now on. *[IP17200( ALL)06/94] 2. Pull the headlamp control knob toward you to the outer position. Headlamps are now on in addition to the above. *[IP17250(BEF )02/95] 3.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP17400(BEF )05/95] *[IP17500(BEF )05/95] Cleaning the Exterior Lamps *[IP17715( F )04/95] *[IP17735( F )06/92] Fog Lamps (If equipped) % % Do not use dry paper towel, chemical solvents or abrasive cleaners to clean the lamps, as these may cause scratches or crack the lamps. The fog lamps rocker switch is located on the instrument panel to the right of the steering column.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP17815( ALL)01/95] *[IP17820( ALL)03/95] *[IP17830( ALL)03/95] Daytime Running Light System *[IP17835( ALL)03/95] ❑ The headlamp system is in the OFF position, *[IP17840( ALL)03/95] *[IP17850( ALL)01/95] ❑ The vehicle is running, and ❑ The vehicle has a fully released parking *[IP17875( ALL)01/95] NOTE: You may notice that the lights flicker when the vehicle is turned on or off. This is a normal condition.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP18400(BEF )03/95] *[IP19175(B F )05/90] % Cargo, Courtesy and Dome Lamps The interior/courtesy lamp is automatically turned on when the driver or passenger door is opened. Turning the headlamp switch fully counterclockwise will operate the interior lamp when the doors are closed.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP19350( F )09/93] quarter page art:0020902-B Cargo/High-mount brakelamp *[IP19400(B F )05/91] RWARNING Do not drive your vehicle with the cargo/courtesy light on. Showing a white light to the rear while driving on public roads is illegal in some places. *[IP19705(B F )07/94] Turning On the Dome/Map Reading Lamps (If equipped) *[IP19805(B F )07/94] The map lamps are located inside the dome light assembly, on each side of the dome light.
File:ltipf.ex Update:Thu May 9 15:21:29 1996 *[IP20060(BEF )04/95] *[IP20070(BEF )04/95] Cleaning the Instrument Panel Lens *[IP20075(BEF )04/95] *[IP20080(BEF )04/95] Cleaning the Interior Lamps % % Clean the instrument panel lens with a soft cloth and a glass cleaner, such as Ford Ultra-Clear Spray Glass Cleaner, or equivalent. Do not use paper towel or an abrasive cleaner to clean the lens as these may cause scratches.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 Steering Column Controls *[SC00400( ALL)01/95] The controls on the steering column and wheel are designed to give you easy access to the controls while you are driving.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC01700( ALL)01/94] one third page art:0020081-C Turn signal lever and functions *[SC01800( ALL)11/89] If the turn indicator light in the instrument panel does not illuminate or remains on (doesn’t flash) when you signal a turn, the turn signaling system is malfunctioning. Have this condition corrected as soon as possible, but make sure that you use the accepted hand signals in the meantime.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC03800( ALL)03/95] one third page art:0020074-B Headlamp high beam switch and turn signal lever *[SC04200( ALL)05/95] *[SC04300( ALL)05/95] Flashing the Lights *[SC04400( ALL)03/95] *[SC04500( ALL)03/95] Windshield Wipers and Washer To flash the headlamps, pull the lever toward you for a moment and then release it. The headlamps will flash whether the headlamp knob is on or off.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC04950( ALL)10/92] one third page art:0020831-A Interval wiper on turn signal lever *[SC05000( ALL)02/95] To set the interval wipers, rotate the knob at the end of the turn signal lever toward or away from the instrument panel to the interval operation you desire.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC05400( ALL)01/93] RWARNING In freezing weather, the washer solution may freeze on the windshield and obscure your vision. Always warm up the windshield with the defroster before you use the washer fluid. If you cannot see through the windshield clearly, it can increase the risk of being involved in a collision.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC05575(BEF )06/93] one third page art:0020075-B Hazard flasher *[SC05600( ALL)01/95] *[SC05800(BEF )05/95] *[SC06150(BEF )06/93] Horn To sound the horn, press either horn pad.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC06200(BEF )05/95] *[SC06300(BEF )05/95] Tilt Steering (If equipped) RWARNING Never adjust the steering wheel when the vehicle is moving. *[SC06500(BEF )01/94] one third page art:0020089-C Turn signal and tilt release wheel lever *[SC06700( ALL)04/95] To change the position of the steering column/wheel, pull the release lever on the column toward you. Tip the steering wheel to the desired position. Release the lever to lock the steering wheel in place.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC07300(BEF )03/91] *[SC07450( ALL)05/95] *[SC07500( ALL)05/95] Speed Control (If equipped) Your vehicle has speed control, so you can automatically maintain a constant speed above 30 mph (50 km/h). The switches to operate the speed control are on the steering wheel.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC08600( ALL)01/95] If you drive up or down a steep hill, your vehicle may momentarily slow down or speed up, even though the speed control is on. This is normal. *[SC08640( ALL)04/95] NOTE: If your speed increases above your set speed while driving in j (Overdrive) on a downhill grade, you may want to depress the transmission control switch located on the shift lever to turn off overdrive to reduce vehicle speed.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC09325( ALL)05/95] RWARNING Do not shift the transmission into N (Neutral) with the speed control on. *[SC09350( ALL)03/94] To maintain a preset speed under the above conditions, with electronically controlled transmissions — press the Transmission Control Switch. The indicator light will turn on and illuminate the word “OFF.” This will cancel “Overdrive”. You can press the Transmission Control Switch on or off at any speed.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 % Accelerating With the Speed Control Operating *[SC09500( ALL)03/95] You can use the accelerator pedal to speed up momentarily. When you take your foot off the accelerator, the vehicle will return to the set speed. *[SC09600( ALL)01/95] *[SC09700( ALL)03/95] Resetting the Speed Control *[SC09400( ALL)03/95] % To reset the speed control to a lower speed, press and hold the COAST switch.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC10250(BEF )10/94] ❑ TAP-UP — This allows you to increase your *[SC10300( ALL)12/91] *[SC10400( ALL)03/95] Turning the Speed Control Off *[SC10500( ALL)06/92] ❑ Press the OFF switch. The speed control is [SC10700(B F )04/95] ❑ Press the clutch pedal slightly [SC10750( ALL)04/95] ❑ Press the brake pedal slightly. The speed current speed in increments of 1 mph (1.6 km/h) by a momentary tap of the SET-ACCEL switch.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC11100( ALL)11/89] *[SC11200( ALL)05/95] Driving uphill or on a steep grade *[SC11250( ALL)03/93] Frequent shifting of an automatic transmission or speed loss during speed control operation can be eliminated by shifting out of overdrive into drive (or by pressing the Transmission Control Switch, if equipped). These conditions could occur in hilly terrain or at higher elevations.
File:ltscf.ex Update:Thu May 9 15:25:14 1996 *[SC11500( ALL)03/95] *[SC11600( ALL)07/94] Cancelling and Resuming a Set Speed *[SC11700( ALL)05/95] To resume the speed you had before, you must be driving at least 30 mph (50 km/h). *[SC11800( ALL)11/94] Press and release the RESUME switch. Your vehicle gradually returns to the previously set speed and then maintains it. % If you press the brake pedal, the speed control is cancelled.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 Features *[FV00401(BEF )02/95] Your vehicle has a variety of features designed for your comfort, convenience and safety. Read this chapter to find out about standard and optional features. *[FV00501( EF )05/90] NOTE: For Stripped Chassis vehicles, see your Body Builders manual for location and operation of all items defined in this section.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV07601( F )01/93] *[FV07701( F )10/90] To release the tailgate: *[FV07801( F )05/90] If you disconnect the upper end of each cable, you can lower the tailgate completely. *[FV07901( F )05/91] NOTE: Step bumpers or hitches may damage the tailgate if it is lowered completely. Open the tailgate as directed above, but support it to allow for slack in the cables at both sides.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV08501( F )05/90] one third page art:0020197-A Tailgate removal *[FV08601( F )05/95] RWARNING Do not drive your vehicle with the tailgate open unless there is a load holding it in place. *[FV14100(BEF )04/95] *[FV14500(BEF )05/95] Power Door Locks (If equipped) *[FV14701(BEF )03/91] The manual door locks will override the power door lock controls. The power door lock switches are located in the front doors. To lock all doors push the switch marked L.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV15301(BEF )02/95] Remote Entry System (If equipped) *[FV15401(BEF )06/94] If your vehicle has the remote entry system, you can lock or unlock the vehicle doors without using a key. The remote also has a personal alarm feature. The buttons for the system are located on the two hand held transmitters that came with your vehicle. *[FV15600(BEF )02/95] The system will work with up to four transmitters. Your vehicle came with two transmitters.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV16300(BEF )02/95] Locking the doors with the remote entry system [FV16500(B F )04/95] To lock all the doors, press the LOCK button. *[FV16600(B F )03/93] If you would like a signal that the doors are being locked, press the LOCK button again within five seconds. The door will lock again, the horn will beep, and the external lamps will flash.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV17501(BEF )02/95] *[FV17601(BEF )02/95] Replacing the batteries *[FV17701(BEF )02/95] NOTE: The operating range of the remote entry system can also be affected by weather conditions (such as very cold temperatures) or structures around the vehicle (buildings, other vehicles, radio and TV towers, etc.). Typical operating range will allow you to be up to 33 feet (10 meters) away from your vehicle.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV18001(BEF )02/95] quarter page art:0020790-A Replacing the batteries *[FV18101(BEF )02/95] *[FV18200(BEF )02/95] Replacing lost transmitters *[FV18301(BEF )02/95] You can also purchase additional transmitters (up to 4 transmitters can be used) from your dealer. You will need to take all your transmitters to the dealer so they can program them to the remote entry system all at the same time.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV18900(B F )04/94] Battery Saver (with Remote Entry — If equipped) *[FV19000(B F )03/95] When the ignition is turned off, the vehicle will turn off battery voltage to all of these lights after 40 minutes: glove box, engine compartment, overhead console, mirror, courtesy and interior (including cargo) lamps.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV22901(BEF )03/91] *[FV23001(BEF )05/90] *[FV23501(BEF )05/95] Using the Power Windows (If equipped) Each door has a power control that opens and closes the window on that door. The driver’s door has a master control switch that operates both front door windows. You must place the ignition switch in the ON or ACC position to use your power window controls. RWARNING Do not let children play with the power windows. They may seriously hurt themselves.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV24101(BEF )01/95] *[FV24801(BEF )05/90] *[FV24901(BEF )08/94] *[FV25001(BEF )08/94] *[FV25101(BEF )10/89] *[FV25201(BEF )04/95] *[FV25301(BEF )04/89] Seats Adjusting the Front Seat Manually To move the front seat forward or rearward: 1. Find the adjustment lever at the lower left corner of the front seat. 2. Push the lever to the left to unlatch the seat. 3. Move the seat to the desired position. 4.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV26001(BEF )05/95] RWARNING Never adjust the driver’s seat or seatback when the vehicle is moving. *[FV26100(BEF )05/95] RWARNING Do not pile cargo higher than the seatbacks to avoid injuring people in a collision or sudden stop. *[FV26200(BEF )05/95] RWARNING To reduce the risk of serious injury in a collision, always drive and ride with your seatback upright and the lap belt snug and low across the hips.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV26400(BEF )10/89] *[FV27301(BEF )02/92] Reclining Bucket Seats *[FV27401(B F )03/93] 1. On the outboard side of the seat, lift the recliner handle up and hold it in place. *[FV27501(BEF )10/89] 2. Lean against the back of the seat and adjust it to the position you want. *[FV27601(BEF )10/89] 3. Release the handle to lock the seat back in place. *[FV27701(BEF )10/89] 4. To return the seat back upright, lift the handle and lean forward.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV28010( F )06/93] *[FV28020( F )06/93] 40/20/40 Seat Your F-Series may have a 40/20/40 seat which consists of two bucket seats that adjust independently of each other, and a center seat that is fixed. The center seatback can be folded down into an armrest/console.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV28070( F )06/93] *[FV28080( F )06/93] The center seatback console Your center seatback will fold down into an armrest/console. The console includes two cupholders, a removable coin holder and storage space for cassette/CD’s.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV30501(B F )01/89] *[FV30601( F )12/91] Seat Back Release (Bench Seat) *[FV30701( F )05/90] The SuperCab split back bench seat can be folded forward on either side to gain access to the rear of the vehicle. To do so, push up the latch button located at the top of the seat back. The front seat back for the Regular Cab and the rear seat back for the Crew Cab can be folded forward to gain access to the storage space behind.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV39501( F )01/95] Center Facing Jump Seat — SuperCab Only *[FV39701( F )01/89] The center facing jump seat should be kept in the stored position for easy access to the rear cab area. To open the seat: *[FV40001( F )01/89] 1. Unsnap the retaining strap holding the seat in its stored position. *[FV40101( F )01/89] 2. Swing the seat support away from the seat bottom while lowering the seat to a horizontal position.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV40901( F )01/89] *[FV41001( F )01/89] Rear Bench Seat (SuperCab Only) *[FV41101( F )01/89] *[FV41201( F )01/89] *[FV41301( F )12/91] To fold the seat: *[FV41401( F )03/90] The forward facing rear seat in the SuperCab forms a cargo floor when folded. 1. Move the front seat forward if necessary. 2. Pull the strap at the passenger’s side of the seat bottom and pivot the seat assembly forward (180 degrees). 3.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV45901(B F )05/93] *[FV46020(B F )05/93] Tilt Slide Seat *[FV46025(B F )05/94] *[FV46030(B F )05/93] To operate the tilt slide seat: 1. Lift the seatback release lever on the outboard side of the seat cushion to unlock the slide mechanism and the seatback. *[FV46035(B F )03/93] 2. Push the seat assembly forward to provide entry space to the rear seat compartment of the vehicle.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV46055(B F )07/94] one third page art:0021018-B *[FV46065(B F )05/95] Prior to operating the vehicle, check to ensure that the seat assembly is locked by pushing or pulling the seat forward or rearward. If seat does not lock, repeat steps 2 and 3. *[FV46070(B F )07/94] one third page art:0021019-B *[FV46075(B F )03/93] *[FV46080(B F )05/93] To operate the seat adjuster: 4.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV46085(B F )07/94] one third page art:0021020-B *[FV46600( EF )05/95] *[FV46700( EF )08/94] Using the Power Seats (If equipped) If your vehicle has the power seat option, you can adjust it in several directions. The controls are on the outboard side of the seat.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV47000(BEF )03/94] Using the Power Lumbar Support and Side Bolsters *[FV47400(BEF )12/91] If your vehicle is equipped with this option, you can inflate a lumbar support pad in the seat back. To inflate the lumbar pad, push the (+) side of the rocker switch. To deflate push the (-) side of the switch.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV47640(BEF )04/95] *[FV47650(BEF )04/95] Fabric *[FV47660(BEF )04/95] NOTE: Before using any cleaner, test it on a small, hidden area of fabric. If the fabric’s color or texture is adversely affected by a particular cleaner, do not use it. *[FV50000(BEF )01/95] *[FV50200(BEF )03/91] Mirrors Remove dust and loose dirt with a whisk broom or a vacuum cleaner. Remove fresh spots immediately. Follow the directions that come with the cleaner.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV50700(B F )01/95] % Automatic Dimming Inside Rearview Mirror (If equipped) *[FV50850(B F )03/93] half page art:0021008-A Automatic dimming inside rearview mirror *[FV50900(B F )03/93] This mirror is equipped with an electrochromic glare control feature that automatically darkens the mirror, reducing glare from the headlamps of vehicles behind you. A forward facing light sensor measures the ambient light just as your eyes do.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV51050(B F )03/94] To turn the mirror on, push the On/Off switch, located on the bottom of the mirror, to latch it in the ON position. The button will be latched in the up position and at night a low intensity green light will be visible from the button when the mirror is turned on. To turn the mirror off, push the On/Off switch again and the button will unlatch shutting off the light and the mirror will be off.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV52400( EF )05/93] *[FV52500( EF )05/93] Illuminated Vanity Mirror (If equipped) Your vehicle may feature illuminated vanity mirrors on the sun visors. You can turn on the lighted mirror by lifting the mirror door cover. *[FV52600( EF )05/93] quarter page art:0020251-A Visor vanity mirror *[FV52700( F )05/93] Visors that are equipped with the lighted vanity mirror also have an auxiliary visor.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV52900(BEF )12/89] *[FV53000(BEF )10/89] Outside Mirrors (Manual Control) *[FV53100(BEF )03/95] On vehicles equipped with fold-away mirrors, the mirrors should be folded rearward into the body position before entering automatic car wash systems. Adjust outside mirrors with the door closed and the seat adjusted for comfort and proper vehicle control. Move the mirrors for best view by tilting up or down, left or right.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV54300( F )01/93] For vehicles equipped with the swing-out recreational mirrors, the right-hand side mirror is a flat glass mirror. All other right-hand side view mirrors used are convex. Convex mirrors have a curved surface and will show a wider view of the lane next to and behind your vehicle. *[FV54400(BEF )05/95] RWARNING The side view mirror on the right makes objects appear smaller and farther away than they actually are.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV59400(BEF )01/95] *[FV59500(BEF )12/91] Console Your vehicle may have a full console. The full console has the features shown in the illustration below.
File:ltfvf.
File:ltfvf.ex Update:Thu May 9 15:20:08 1996 *[FV69900(BEF )03/95] *[FV70000(B F )05/94] *[FV70200(BEF )06/92] Power Point Electrical Outlet The power point outlet is located on the instrument panel to the right of the shift lever. This outlet should be used in place of the cigarette lighter for optional electrical accessories. NOTE: Do not use the cigarette lighter in place of the power point.
File:ltasf.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS01200(BEF )04/95] *[AS01250(BEF )05/95] Compact Disc Radio The Compact Disc Radio combines the Electronic Stereo Radio with the Ford Compact Disc Player. *[AS01300(BEF )04/95] Using the Controls on Your New Radio/CD Player *[AS01400(BEF )04/95] Most of the features of this unit work for both radio and CD operation. Also, some of the knobs and buttons control several different functions, so be sure to read all of the operating instructions carefully.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS01900(BEF )05/95] *[AS02000(BEF )07/94] How to tune radio stations *[AS02100(BEF )04/95] ❑ Using the “SCAN/TUNE” button to manually % There are four ways for you to tune in a particular station. You can manually locate the station using the “SCAN/TUNE” button, “SEEK” the station, “SCAN” to the station or select the station by using the memory buttons, which you can set to any desired frequency. These four methods are described below.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS02400(BEF )04/95] *[AS02500(BEF )04/95] ❑ Using the “SEEK” function *[AS02600(BEF )04/95] ❑ Using the “SCAN/TUNE” button to scan This feature on your radio allows you to automatically select listenable stations up or down the frequency band. Press the top a half of the “SEEK” button to select the next listenable station up the frequency band. Press the bottom b half of the button to select the next listenable station down the frequency band.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS03400(BEF )04/95] 2. Press one of the memory buttons and hold the button until the sound returns. That station is now held in memory on that button. *[AS03500(BEF )04/95] 3. Follow the two steps above for each station memory preset button you want to set. *[AS03510(BEF )04/95] NOTE: If the vehicle’s battery is disconnected, the clock and station memory preset buttons (if programmed in auto mode) will need to be reset.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 now in the “AUTO” mode and this display will show “AUTO” each time a preset is activated. *[AS04000(BEF )05/95] NOTE: If there are fewer than five strong stations in the frequency band, the remaining unfilled buttons will store the last strong station detected on the band. *[AS04100(BEF )05/95] After all stations have been filled, the radio will begin playing the station stored on memory button 1.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS05050(BEF )04/95] *[AS05100(BEF )04/95] ❑ Adjusting speaker balance *[AS05150(BEF )04/95] *[AS05200(BEF )04/95] ❑ Adjusting speaker fader *[AS05250(BEF )04/95] NOTE: Illuminated bars in the display show relative levels of bass and treble and positions of speaker balance and fader functions after adjustments are made, then revert to volume level set.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS05400(BEF )04/95] When in the CD mode, push the “CLOCK” button to change the display from elapsed time mode to track number mode to clock mode. If the CD track selection is changed when you are in the clock or elapsed time mode, the new track number will be displayed for approximately ten seconds and then revert back to the previous mode. *[AS05425(BEF )07/93] The clock can also be viewed with the ignition off.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS06300(BEF )04/95] Once a disc is inserted, operation of the CD player will override that of the radio. *[AS06350(BEF )04/95] NOTE: The volume, bass, treble, balance and fader controls on the radio are also used with the CD player. Refer to earlier operating instructions on these controls.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 resume CD play, press the “PLAY/STOP” button once again. *[AS06750(BEF )04/95] NOTE: If the ignition key is turned OFF during play and then is set to the ON or ACCESSORY position, the CD player will resume playing in the mode it was in when ignition was turned off. *[AS06760(BEF )04/95] *[AS06765(BEF )04/95] Using the “SEEK” feature *[AS06770(BEF )05/95] Press the bottom (b) half of the “SEEK” button once to repeat the current playing selection.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 button to begin playing the first track of the disc, press the “REV” button to back up from the end of the disc, or use the “SEEK” function to locate a desired track. *[AS07000(BEF )04/95] *[AS07050(BEF )04/95] Using the “SCAN” function *[AS07100(BEF )04/95] *[AS07150(BEF )04/95] *[AS07200(BEF )04/95] Special features of your CD player *[AS07250(BEF )04/95] *[AS07300(BEF )04/95] *[AS07350(BEF )04/95] Press the “SCAN/TUNE” button to enter the scan mode.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS07400(BEF )04/95] *[AS07500(BEF )04/95] How to eject the disc *[AS07600(BEF )04/95] NOTE: You can eject the disc while the radio power and/or ignition is on or off. Push the “EJECT” button to stop play, eject the disc and resume radio operation of your audio system.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS08900(BEF )04/95] ❑ Do not insert anything other than a disc into *[AS09000(BEF )04/95] CAUTION: The use of optical instruments with this product will increase eye hazard as the laser beam used in this compact disc player is harmful to the eyes. Do not attempt to disassemble the case. Refer servicing to qualified personnel only.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS09800(BEF )04/95] If play does not begin after the CD button is pushed: *[AS09850(BEF )04/95] *[AS09900(BEF )04/95] *[AS10000(BEF )05/95] ❑ The radio is not on. ❑ The unit is in the stop mode. ❑ Moisture may have condensed on the lenses *[AS10100(BEF )04/95] *[AS10200(BEF )04/95] If the sound skips: within the unit. If this occurs, remove the CD magazine and wait approximately an hour until the moisture evaporates.
File:ltasf.
File:ltasf.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS22305(BEF )05/95] *[AS22310(BEF )05/95] How to tune radio stations (Stereo Radio) There are three ways for you to tune in to a particular station. You can manually locate the station by using the “TUNE” button, “SEEK” the station or select the station by using the memory buttons, which you can set to any desired frequency.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS22550(BEF )05/95] ❑ Using the “AMS” function to manually tune your radio (Stereo Cassette Radio) You can change the frequency up or down one increment at a time by first pressing the “AMS” button (display shows “TUNE”) then within approximately five seconds pressing and releasing either the right (a) or left (b) side of the “SEEK” button. To change frequencies quickly, press and hold down either the right or left side of the “SEEK” button.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS23200(BEF )04/95] *[AS23250(BEF )05/95] ❑ Setting the Station Memory Preset buttons *[AS23400(BEF )02/95] Follow the easy steps below to set these buttons to the desired frequencies: *[AS23500(BEF )04/95] *[AS23700(BEF )04/95] 1. Select a band, then select a frequency. 2. Press one of the memory buttons and hold the button until the sound returns. That station is now held in memory on that button. *[AS23800(BEF )04/95] 3.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS24500(BEF )08/89] *[AS24600(BEF )04/95] *[AS24650(BEF )05/95] Speaker features and operation *[AS24800(BEF )04/95] *[AS24850(BEF )05/95] ❑ Adjusting speaker fader *[AS24950(BEF )05/94] NOTE: Illuminated bars show relative levels of bass and treble and positions of speaker balance and fader functions after adjustments are made, then revert to volume level set.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS25000(BEF )02/95] Using the Controls of Your Cassette Tape Player *[AS25500(BEF )02/95] *[AS25600(BEF )02/95] How to insert a tape *[AS25650(BEF )04/95] NOTE: A cassette tape can be loaded with the ignition on whether or not the radio power is on.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS27100(BEF )02/95] *[AS27250(BEF )02/95] How to eject the tape *[AS27300(BEF )02/95] *[AS27500(BEF )05/95] Using the DolbyH B noise reduction feature *[AS27550(BEF )02/95] NOTE: Noise reduction system manufactured under license from Dolby Labs Licensing Corporation. “Dolby” and double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
File:ltasf.
File:ltasf.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS32500( EF )02/95] *[AS32600( EF )02/95] Using the Controls on Your New Radio *[AS32700( EF )07/90] Press the “ON/OFF-VOLUME” control to turn the radio on. Press again to turn it off. Rotate the control clockwise to increase the volume. *[AS32900( EF )07/93] NOTE: If your radio has a clock feature, turn the radio on by rotating the control clockwise.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS33500( EF )04/95] *[AS33600( EF )08/89] ❑ Setting the Station Memory Preset buttons *[AS33800( EF )05/94] *[AS33900( EF )07/94] 1. Tune to the desired frequency. 2. Press one of the memory buttons and hold the button in until the sound returns. That station is now held in memory on that button. *[AS34000( EF )08/89] 3. Follow the two steps above for each station memory preset you want to set.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS34700( EF )07/90] *[AS34710( EF )04/92] *[AS34720( EF )07/90] How to set the clock 1. Turn the radio on. 2. Press and hold in the “ON/OFF-VOLUME-CLOCK” control. *[AS34730( EF )07/90] 3. While holding the “ON/OFF-VOLUME-CLOCK” button in, press the “TUNE” button left (s) to advance the hours and right (+) to advance the minutes. *[AS34740( EF )07/90] NOTE: The clock displays 12-hour time with no AM/PM indications.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS35900(BEF )01/95] If there is a building or large structure between the antenna and station, some of the signal “bends” around the building, but certain spots receive almost no signal. Moving out of the “shadow” of the structure will allow the station to return to normal. *[AS36000(BEF )01/95] When the radio waves are reflected off objects or structures, the reflected signal cancels the normal signal, causing the antenna to pick up noise and distortion.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS36500(BEF )01/95] Automatic gain control circuitry for both AM and FM bands has been incorporated into this system to reduce strong signal capture and overload. *[AS36600(BEF )08/89] *[AS36700(BEF )05/95] All About Radio Frequencies % The Federal Communications Commission (FCC) and the Canadian Radio Telecommunications Commission (CRTC) establish the frequencies AM and FM radio stations may use for their broadcasts.
File:ltasf.ex Update:Thu May 9 15:15:21 1996 *[AS37000(BEF )01/95] Important Warranty and Service Information *[AS37050(BEF )07/90] *[AS37100(BEF )03/95] Warranty *[AS37300(BEF )10/92] *[AS37400(BEF )01/95] Service Your sound system is warranted for three years or 36,000 miles (60,000 kilometers), whichever comes first. Consult your vehicle warranty booklet for further information. Ask your dealer for a copy of this limited warranty.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 Driving Your F-Series *[DR00350(BEF )03/95] Procedures for driving your vehicle will vary depending on which type of transmission your vehicle has.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR01000( EF )06/93] one third page art:0020129-C The positions of the column-mounted gearshift *[DR01100( EF )01/93] RWARNING Hold the brake pedal down while you move the gearshift lever from position to position. If you do not hold the brake pedal down, your vehicle may move unexpectedly and injure someone. *[DR01200( EF )01/95] Once you place the gearshift securely into position, gradually release the brake pedal and use the accelerator as necessary.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR01250( EF )01/95] 4. Apply the brake pedal and shift to N (Neutral). (If the vehicle is shifted to P (Park), you must repeat the previous steps.) *[DR01260( EF )01/95] *[DR01265( EF )05/95] 5. Start the vehicle. If you need to shift out of P (Park) by using the alternate procedure described above, it is possible that a fuse has blown and that your brakelamps may also not be functional.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 EF )01/95] *[DR02100( [DR02200( EF )06/92] * When to use 1 (Low) Use 1 (Low) to drive up steep grades and to provide maximum engine braking on hilly roads. Upshifts from 1 (Low) can be made by manually shifting to 2 (Second) or D (Drive). Selection of 1 (Low) gear provides only First gear operation at start-up. When driving, manually shifting to 1 (Low) will result in downshifts to Second gear or First gear depending on vehicle speed.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR02650( F )05/95] RWARNING Do not leave the vehicle unattended with the transfer case in the N (Neutral) position. Always set the parking brake fully and turn off the ignition when leaving the vehicle.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 Speed, Vehicle Speed and Transmission Temperature are used by the PCM to shift the transmission into a higher or lower gear when required for the best performance and fuel economy. For example, you may notice that the transmission will upshift to a higher gear more quickly when the vehicle is first driven and has not reached normal operating temperature.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR08915(BEF )06/94] one third page art:0021081-A The positions of the column-mounted gearshift *[DR08925( ALL)05/95] quarter page art:0020771-C Transmission Control Switch and indicator light (located on the gearshift lever) *[DR09000( ALL)01/93] RWARNING Hold the brake pedal down while you move the gearshift lever from position to position. If you do not hold the brake pedal down, your vehicle may move unexpectedly and injure someone.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR09110( ALL)01/95] NOTE: Your vehicle is equipped with a brake-shift interlock feature. This feature prevents you from shifting from P (Park) unless you have the brake pedal depressed. (The ignition must be in the ON position.) If you cannot shift from P (Park) with the brake pedal depressed: *[DR09120( ALL)01/95] *[DR09130( ALL)01/95] *[DR09140( ALL)01/95] 1. Apply the parking brake. 2. Remove the key. 3.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR09400( ALL)01/95] % [DR09500( ALL)04/95] * *[DR09600( ALL)04/95] Driving *[DR09700( ALL)03/94] *[DR09800( ALL)05/95] When to use Drive % When to use j (Overdrive) This is the normal driving position. As the vehicle picks up speed, automatic upshifts to second, third and fourth gears will occur when j Overdrive is chosen on the selector and the transmission control switch has not been pressed.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR09900( ALL)05/95] To return the transmission to the normal j Overdrive operation, press the transmission control switch again. The Transmission Control Indicator Light will not be illuminated when Overdrive operation resumes. This switch may be used to select O/D ON or O/D OFF any time the vehicle is being driven. *[DR09950( ALL)05/94] When starting your vehicle, the overdrive system will automatically be in the normal overdrive mode.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR10500( ALL)01/95] *[DR10600( ALL)03/94] P (Park) *[DR10650( ALL)03/94] The gearshift is securely latched in P (Park) if you cannot rotate it in a clockwise direction without lifting it toward you. *[DR10700( ALL)05/95] Always come to a complete stop before you shift into P (Park). This position locks the transmission and prevents the rear wheels from turning.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR11100( ALL)06/94] *[DR11200( ALL)04/95] Forced Downshifts *[DR11235( ALL)03/94] *[DR11275( ALL)03/94] Power Braking *[DR11285( ALL)03/94] NOTE: Continued operation in the stall condition can result in transmission overheat, malfunction or fluid expulsion.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR11750(B F )03/95] Driving with your foot resting on the clutch may cause the vehicle to jerk sharply when pressing or removing your other foot from the accelerator. *[DR11800(B F )03/95] *[DR11900(B F )02/95] Shifting the Gears % The gearshift for a manual transmission is mounted on the floor. The gearshift pattern consists of seven positions: Neutral, five forward gears, and Reverse.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR12800(B F )01/95] With the 5-speed transmission you can engage R (Reverse) only by moving the gearshift from the left of 3 (Third) and 4 (Fourth) gears before you shift into R (Reverse). This is a special lockout feature that protects you from accidentally shifting into R when you downshift from 5 (Fifth) gear. *[DR12950(B F )02/92] 5.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR13250(B F )03/91] *[DR13500( F )03/94] Recommended Shift Speeds 4.9L and 5.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR14700( F )03/94] 4.9L, 5.8L & 7.5L Engine with 5-Speed H.D. Manual Overdrive Transmission (4x2 and 4x4) over 8500 GCW (ZF Transmission) [DR14800( F )02/95] twenty pica chart:0020143-C *[DR14850( F )11/89] NOTE: Refer to the Diesel Engine Owner’s Guide Supplement for shift speed information on vehicles equipped with 7.3L diesel engines.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR15300(B F )03/95] When you come to a stop, do not downshift through each gear. Disengage the clutch and use the brake as necessary. Downshifting through the gears decreases your vehicle’s fuel economy. *[DR15400(B F )05/95] RWARNING Continued use of a damaged or worn clutch, prolonged clutch slippage or downshifting at excessive speeds can result in a failure of the engine, transmission or clutch components.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 [DR15903(B F )05/95] When the transfer case is in the N (Neutral) position, the engine and transmission are disconnected from the rest of the driveline. Therefore, the vehicle is free to roll even if the automatic transmission is in P (Park) or the manual transmission is in gear. *[DR15906(B F )05/95] RWARNING Do not leave the vehicle unattended with the transfer case in the N (Neutral) position.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR16101(B F )03/95] Four-Wheel Drive (4WD) System (If equipped) *[DR16130(B F )08/94] When you select the 4WD mode, your light truck uses all four wheels to power itself. This increases traction, enabling you to drive your 4x4 over terrain and road conditions two-wheel drive vehicles cannot. *[DR16160(B F )10/94] Power is supplied to all four wheels through a transfer case that allows you to select four-wheel drive when necessary.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR16230(B F )05/95] RWARNING Do not leave the vehicle unattended with the transfer case in the N (Neutral) position. Always set the parking brake fully and turn off the ignition when leaving the vehicle.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR16310(B F )01/95] Four-wheel drive operation (4H or 4L) on dry pavement is not recommended. Operating the vehicle in four-wheel drive on dry pavement will increase tire wear, decrease fuel economy, and make four-wheel drive disengagement difficult for the transfer case. *[DR16340( F )06/93] NOTE: All transfer cases on F-350 4x4 trucks are equipped with an opening for a power take-off (PTO).
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR16370(B F )06/94] *[DR16401(B F )06/94] 4x4 system indicator lights *[DR16430(B F )06/94] ❑ 2H position — Neither the 4X4 or the LOW *[DR16460(B F )06/94] *[DR16490(B F )06/94] ❑ 4H position — Only the 4x4 light is lit.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR16630(B F )05/91] ❑ When the vehicle is stopped while in 4H and *[DR16640(B F )06/94] *[DR16670(B F )03/93] To shift from 4H to 2H: *[DR16701(B F )06/94] *[DR16730(B F )03/93] For example: the vehicle’s direction is reversed from the previous direction, the automatic locking hubs momentarily disengage and then re-engage. The automatic locking hubs may click as they automatically engage in the new direction.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 one continuous motion without pausing in the N (neutral) position. Pausing in the neutral position can result in gear clash and difficult shifting. If, while shifting between 4H and 4L, the transfer case gets stuck in the N (neutral) position or is difficult to shift into either 4H or 4L, it may be necessary to let the vehicle roll slightly and/or turn off the engine (particularly on vehicles equipped with automatic transmissions).
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR17030(B F )06/94] Lever Operated System With Manual Locking Hubs *[DR17060(B F )06/94] *[DR17090(B F )06/94] To shift from 2H to 4H: Stop the vehicle and engage the manual locking hubs by turning both hub lock selector knobs clockwise to the LOCK position. Move the transfer case shift lever straight back to the 4H position. After both hubs have been turned to the LOCK position, shifts between 2H and 4H (or 4H to 2H) may take place at any speed.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR17270(B F )06/94] Operating in 2H with the hubs in the LOCK position increases fuel consumption, noise, vibration, and wear. For prolonged 2H operation on dry pavement, set the manual locking hubs to the FREE position.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR17490(B F )12/91] NOTE: Dash mounted four wheel drive indicator lights are off when your vehicle is in neutral. *[DR17540(B F )01/95] To shift from N (Neutral) to either 4H or 4L, stop the vehicle and engage the parking brake. Place the automatic transmission into N (Neutral) or depress the clutch on manual transmission vehicles. Push the transfer case shift lever to the desired position.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 4x4 instrument panel light. The amber light to the left of the LOW RANGE light will light up at the same time as the instrument panel LOW RANGE light. *[DR17750(B F )06/94] ❑ Two Wheel Drive mode — Neither the 4x4 *[DR17780(B F )06/94] *[DR17810(B F )06/94] ❑ 4x4 mode — Only the 4x4 light is lit. ❑ 4x4 LOW RANGE mode — Both the 4x4 and *[DR17840(B F )06/94] *[DR17871(B F )06/94] To shift from Two-Wheel Drive to 4x4: nor the LOW RANGE lights are lit.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR17960(B F )06/94] — The initial shift from two-wheel drive to 4x4 while the vehicle is moving can cause some momentary clunk and ratcheting sounds. This is the front drivetrain coming up to speed and the automatic locking hubs engaging and is not a cause for concern. *[DR17990(B F )12/91] — Because of possible damage to powertrain components, never shift from Two-Wheel Drive to 4x4 with the rear wheels slipping.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 movement of front-wheel drive components while operating in two-wheel drive. *[DR18230(B F )03/91] *[DR18290(B F )06/92] To shift from 4x4 to 4x4 LOW RANGE: *[DR18300(B F )08/94] NOTE: The vehicle must already be in 4x4 before pushing the Low Range Button.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR19700(B F )08/94] ❑ Manual locking hubs must be in LOCK *[DR19800(B F )11/89] When using four-wheel drive, maintain steering wheel control at all times, especially in rough terrain. Since sudden changes in terrain can result in abrupt steering wheel motion, make sure you grip the steering wheel rim from the outside. Do not grip the spokes. *[DR19900(B F )05/90] Drive cautiously to avoid vehicle damage from concealed objects such as rocks and stumps.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR20500(B F )11/89] After driving through mud, clean off residue stuck to rotating driveshafts and tires. Excess mud stuck on tires and rotating driveshafts causes an imbalance which could damage drive components. *[DR20525(B F )07/94] NOTE: If the transmission and transfer case is submerged in water, their fluids should be checked and changed, if necessary.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR21101(B F )11/89] *[DR21200(B F )10/90] Driving on Snow or Ice *[DR21300(B F )11/89] Avoid sudden applications of power and quick changes of direction on snow or ice. Apply the accelerator slowly and steadily when starting from a full stop. [DR21312(B F )05/95] All utility-type and Four-Wheel Drive vehicles have special design and equipment features to make them capable of performing in a wide variety of off-road applications.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR21900(BEF )10/94] *[DR22000(BEF )03/95] Rear Drum Brakes *[DR22025( F )03/91] Rear Disc Brakes (F-Super Duty and F-Series Stripped Chassis Only) *[DR22050( EFM)04/95] The rear disc brakes are self-adjusting. They do not require service other than periodic lubrication of the caliper slide rails and inspection for pad wear.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR22500( F )10/94] *[DR22600( F )02/92] Rear Anti-lock Brakes *[DR22800( EF )07/94] Even with the Anti-lock Brake System, you should be careful when braking. Front brake lock up on any surface, even on smooth pavement causes loss of steering control. Heavy braking on roads with loose surfaces such as snow or gravel, or severe pavement irregularities could also cause you to lose steering control of your vehicle.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR23250( ALL)11/89] If during normal operation the brake pedal seems “low”, it may indicate the need for a brake system inspection and/or service. You should have your brakes checked as soon as possible. *[DR23300( ALL)02/95] Occasional brake squeal during light to moderate stops does not affect the function of the brake system and is normal.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR24200( ALL)01/95] *[DR24300( ALL)05/95] % *[DR24400( ALL)05/95] Applying the Brakes Apply the brake pedal gradually. Use the “squeeze” technique — push on the brake pedal with a steadily increasing force. This allows the wheels to continue to roll while you are slowing down, which lets you steer properly. RWARNING Do not drive with your foot resting on the brake pedal. This will increase your vehicle’s stopping distance and may also cause brake damage.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR24920(B FM)07/91] one third page art:0020893-A Parking Brake *[DR24950(B F )03/95] RWARNING When parking, do not use the gearshift in place of the parking brake. Turn the key to LOCK whenever you leave your vehicle. Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (First) (manual transmission). Never leave your vehicle unattended while it is running.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR24975(B F )05/95] RWARNING Do not leave the vehicle unattended with the transfer case in the N (Neutral) position. Always set the parking brake fully and turn off the ignition when leaving the vehicle. *[DR25000(B FM)03/93] *[DR25050( ALL)01/93] To release the parking brake, press the service brake pedal with your right foot and pull the parking brake release lever.
File:ltdrf.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR26625(BEF )12/91] *[DR26652(BEF )03/94] Speed limiter *[DR26701( ALL)01/95] % [DR26750( ALL)01/95] * *[DR26801( ALL)03/95] *[DR26850( ALL)03/95] Driving in Bad Weather *[DR26901( ALL)01/95] *[DR26951( ALL)01/95] *[DR27025( ALL)07/94] ❑ Drive slower than you normally would. ❑ Give your vehicle more distance to stop. ❑ To stop on ice, shift to Neutral below 10 *[DR27050( ALL)02/93] *[DR27101(B F )05/91] ❑ Consider using one of the lower gears.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR27350(B F )06/94] RWARNING The rear antilock brake system may not prevent brake lock-up on extremely slippery surfaces. Rear brake lock-up may also occur while driving in four-wheel drive because the transfer case couples the front and rear axles together.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR27801( ALL)01/95] After you drive through the standing water, apply your brakes gently several times as your vehicle moves slowly. This helps to dry the brakes. *[DR27820( ALL)07/94] NOTE: If the transmission and transfer case is submerged in water, their fluids should be checked and changed, if necessary.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR28050(BEF )03/95] *[DR28101(BEF )01/95] *[DR28150(BEF )01/95] Driving With a Heavy Load There are limits to the amount of weight your vehicle can carry or tow. The total weight of your vehicle, plus the weight of the passengers and cargo, should never be more than the Gross Vehicle Weight Rating (GVWR).
File:ltdrf.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR28750( ALL)01/93] *[DR28801( ALL)06/92] Vehicle/Trailer Loads *[DR28950(BEF )02/95] Trailer Towing (may require trailer tow option package) *[DR29001( ALL)03/91] Towing a trailer puts additional loads on your vehicle’s engine, transmission, axle, brakes, tires and suspension. For your safety and for the good of your vehicle, use the right equipment for the type of trailer you tow.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR29350( ALL)05/94] Do not tow a trailer until your vehicle has been driven at least 500 miles (800 km). *[DR29401( ALL)06/92] Vehicle Loading/Towing Information *[DR29450(BEF )03/91] Your vehicle’s load capacity is designated by weight, not volume, so you cannot necessarily use all available space with large or heavy loads.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR29601(BEF )04/95] The following is a typical example of a Safety Compliance Certification Label and an explanation of how this information should be used: *[DR29850( F )03/91] half page art:0020152-C Safety Compliance Certification Label *[DR29950(BEF )06/92] Do not use the sample numbers on the Safety Compliance Certification Label shown. Use the actual numbers from your vehicle certification label.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR30301( ALL)01/93] *[DR30310( ALL)06/92] *[DR30320( ALL)06/92] *[DR30330( ALL)06/92] *[DR30340( ALL)06/92] *[DR30351( ALL)03/91] *[DR30401( ALL)03/94] ❑ GAWR (Gross Axle Weight Rating) ❑ GCWR (Gross Combined Weight Rating) ❑ Maximum Trailer Weight Rating ❑ Maximum Trailer Weight ❑ Trailer Weight Range Base Curb Weight The Base Curb Weight is the weight of the vehicle including fuel, coolants, lubricants, emergency tools, spare wheel and tire.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR30701( ALL)03/91] *[DR30750( ALL)10/94] Gross Vehicle Weight Rating (GVWR) *[DR30801( ALL)01/93] *[DR30850( ALL)03/91] Gross Axle Weight Rating (GAWR) *[DR30901( ALL)03/91] Your Safety Compliance Certification Label not only gives the GVWR, it also gives the Gross Axle Weight Rating (GAWR) which is the carrying capacity for each axle system. For trucks, the rear axle will be designed to carry more weight than the front.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR31050( ALL)06/92] Passenger car type tires when installed on light trucks and multipurpose passenger vehicles are rated at 10% lower load carrying capacity due to the differences in vehicle usages. *[DR31101(BEF )07/92] The vehicle must not be loaded to both the front and rear GAWR because the GVWR will be exceeded. The GAWR of the front and rear axles exceed the GVWR when added together to allow flexibility in fore and aft loading of cargo.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 vehicle (including passengers and cargo) from the GCWR for the towing vehicle. *[DR31180( ALL)06/92] *[DR31190( ALL)06/92] Trailer Weight Range *[DR31201( F )03/91] Refer to the truck camper loading sheet in your vehicle glove box or to the Consumer Information dealer folder on truck camper loading for recommendations on slide-in camper carrying capability with your specific vehicle.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR31650(B FM)03/94] half page art:0020837-B Sample label *[DR31702( ALL)03/91] If you suspect that your payload is excessive, have your vehicle weighed at a highway weigh station or appropriate commercial facility. Weigh the total vehicle and trailer (if applicable), then separately weigh the vehicle at the front and rear wheels. And finally, weigh the trailer separately if applicable.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR31751( ALL)03/91] *[DR31801(B FM)03/94] Use this chart to perform your calculations. twenty-six pica chart:0020838-D *[DR31851( ALL)03/91] NOTE: The Truck Safety Compliance Certification Label has two weight related entries that sometimes cause confusion. *[DR31901( ALL)10/94] Front Axle Reserve Capacity in Pounds: On the sample label, this value is given as 83 pounds (38 kgs).
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 that you can load 83 pounds (38 kgs) of options on the front axle, add 150 pound (68 kgs) passengers to all seating positions, and add evenly distributed cargo in the box without exceeding the GAWR F. *[DR31950( ALL)06/92] It is possible to hang heavier equipment on the front as long as the vehicle owner/operator compensates.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 ALL)01/93] *[DR32201( [DR32251( ALL)10/94] * *[DR32301( ALL)01/95] Trailers Towing a trailer safely means having the proper weight on the tongue (usually 10% of the trailer weight). Load-equalizing hitches on large rigs may transfer weight to each of the vehicle’s axles. This weight must be included in capacity calculations when determining if the vehicle is loaded within safe limits.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR35500(BEF )02/91] *[DR35700(BEF )01/89] Required equipment *[DR35800(BEF )06/92] ❑ Super Cooling and Handling/Suspension *[DR36500( ALL)01/95] *[DR36550( ALL)01/95] Preparing to Tow *[DR36600( ALL)01/93] *[DR36800(B F )12/91] Hitches *[DR37000( ALL)12/92] Whenever a trailer hitch and hardware are removed, make sure all mounting holes in the underbody are properly sealed to prevent noxious gases or water from entering.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR37550(B F )03/91] NOTE: The rated capacities (as shown in this guide) for trailer towing with the factory bumper are only valid when the trailer hitch ball is installed directly into the ball hole in the bumper. Addition of bracketry to either lower the hitch ball position or extend the hitch ball rearward will significantly increase the loads on the bumper and its attachments. This can result in the failure of the bumper or the bumper attachments.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 [DR38417(B F )05/95] Your vehicle has been equipped for use with a 4-wire trailer tow electrical system (running lamps, right hand stop/turn, left hand stop/turn, and ground). *[DR38425(BEF )03/91] Class I and Class II Trailer Tow electrical wiring provides two circuits (right hand and left hand) to operate trailer stop/turn tail lamps. Each stop/turn circuit will operate one combination stop/turn light bulb (# 1157, 3157, 2357, or 3357) on the trailer.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 % If you use the speed control while you are towing on very long, steep grades, the speed control may shut off. *[DR38700( ALL)03/94] If your vehicle is equipped with an Electronic 4-Speed Automatic (E4OD or 4R70W) transmission, operate in Overdrive. Refer to the automatic transmission operation earlier in this chapter. *[DR38800( ALL)10/94] When descending a steep grade with a trailer, operate in Drive rather than Overdrive.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR39300( ALL)11/89] Allow more room for stopping with a trailer attached. Trailer brakes should be applied first, whether manually or automatically controlled, when approaching a stop. *[DR39400( ALL)11/89] For a good handling truck-trailer combination, the trailer tongue load should be approximately 10-15% of the loaded trailer weight. *[DR39500( ALL)05/95] Make a thorough check of your equipment before starting out on the road.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR40300(B F )03/91] *[DR40400(B F )08/94] ❑ For automatic transmissions — apply the parking brake by pressing the service brake pedal down firmly with your right foot while applying the parking brake pedal with your left foot. For manual transmissions — apply the service brake and shift into N (Neutral) while still maintaining pressure on the service brake pedal. Set the parking brake fully.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR41266( F )05/95] The driver SRS is designed to deploy in moderate to severe frontal crashes where the deceleration is of sufficient magnitude. The SRS is designed to always activate in a frontal collision equivalent to hitting a solid barrier (such as a wall) at about 14 mph or more, or, roughly speaking, a full frontal perpendicular collision with a parked car or truck of similar size at 28 mph (45 km/h) or more.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR41274( F )02/94] Ford recommends the following vehicle specifications for low speed, personal use snow removal: [DR41276( F )05/95] ten pica chart:0021090-B *[DR41300( F )01/93] Snowplowing and the Heavy Duty Front Suspension Package *[DR41400( F )03/94] If you plan to use your vehicle for plowing snow, it should be equipped with the Heavy Duty Front Suspension option.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR41700( F )01/93] ❑ If necessary, add weight to the rear of the *[DR41801( F )01/93] ❑ The Front Axle Accessory Reserve Capacity *[DR41900( F )01/93] ❑ The weight of the snowplow and related *[DR41950( F )01/93] ❑ Permanently attached plow equipment should *[DR42000( F )01/93] Equip your vehicle with lights that conform to Federal and local regulations for snowplowing. See your dealer for the correct type of wiring.
File:ltdrf.ex Update:Thu May 9 15:17:55 1996 *[DR42200( F )02/95] RWARNING If the GVWR or the GAWR specified on the Safety Compliance Certification Label is exceeded, your vehicle may be damaged or you may lose control and injure someone.
File:ltref.ex Update:Thu May 9 15:24:41 1996 Roadside Emergencies % *[RE00400( ALL)03/95] *[RE00450( EF )04/94] Jump-Starting Your Vehicle NOTE: Read the 7.3L Diesel Engine Owner’s Guide Supplement for information on jump-starting your diesel-powered light truck. *[RE00500( ALL)01/95] Your vehicle’s battery may die if you leave the lights on or any electrical equipment on after you turn the engine off. If this happens, you may be able to jump-start from a booster battery to start your vehicle.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE00900( ALL)05/95] % RWARNING Batteries contain sulfuric acid which burns skin, eyes, and clothing. *[RE00925( ALL)05/95] If the acid touches someone’s skin, eyes, or clothing, immediately flush the area with water for at least 15 minutes. If someone swallows the acid, have him or her drink lots of milk or water first, then Milk of Magnesia, a beaten egg, or vegetable oil. Call a doctor immediately.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE01400( ALL)04/95] 3. Park the booster vehicle close to the hood of the disabled vehicle. Make sure the vehicles do not touch each other. Set the parking brake on both vehicles and stay clear of the engine cooling fan and other moving parts. *[RE01500( ALL)03/95] 4. Check all battery terminals and remove any excessive corrosion before you attach the jumper cables. *[RE01600( ALL)02/95] 5. Turn on the heater fan in both vehicles.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE02100( ALL)04/95] 4. Connect the other end of the second cable to a good metallic surface on the engine or frame of the disabled vehicle. *[RE02200( ALL)05/95] RWARNING Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE02900( ALL)03/95] *[RE03000( ALL)03/95] Removing jumper cables 1. Always remove the jumper cables in the reverse order. Remove the negative (s) end of the jumper cable from the metallic surface on the engine or frame of the disabled vehicle. *[RE03100( ALL)05/95] 2. Remove the negative (s) cable from the booster battery. *[RE03200( ALL)03/95] 3. Remove the positive (+) cable from the booster battery. *[RE03400( ALL)05/95] 4.
File:ltref.ex Update:Thu May 9 15:24:41 1996 % *[RE03600( ALL)03/95] *[RE03700( ALL)01/95] *[RE03800( ALL)03/95] *[RE03900(BEF )01/95] Changing a Tire If you get a flat tire while you are driving, do not apply the brake heavily. Instead, gradually decrease the speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road. Park on a level spot, turn off the ignition, set the parking brake, and turn on the hazard flashers.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE05100(BEF )03/95] *[RE11700( F )05/90] Spare Tire Location The spare tire for your truck is stowed at the rear under the frame unless you have the optional in-box spare tire mounting. *[RE11750( F )05/90] one third page art:0020281-A Spare tire stowage *[RE11800( F )03/91] *[RE11900( F )05/90] To remove the spare tire: 1.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE12200( F )01/89] 4. Lower spare tire, swing the channel to the rear and remove the lug wrench from the channel tube. *[RE12300( F )04/89] 5. Remove the wheel retainer from the center bolt. If necessary, use the tapered end of the wrench inserted in the retainer for more leverage. *[RE12400( F )01/89] 6. Remove the spare tire from the channel assembly.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE13200( F )01/89] *[RE13300( F )04/89] Position of eyebolt After the eyebolt has been tightened it should be at a right angle to the slot. That is, it should be at 90 degrees to the center line of slot, if not, tighten it to that position. This is necessary to prevent channel separation and/or loss of the spare tire if the spare becomes loose in the channel.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE13500( F )01/89] When the truck is ordered with a spare wheel only (no tire), it is stowed with a wood spacer in the usual spare tire location. Remove the wood spacer before installing the spare tire and wheel. *[RE13600( F )01/89] After the spare tire and wheel are stowed, adjust the driver side channel ball end bolt and the eyebolt as necessary until the tire cannot be moved by hand pressure.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE15350(B F )06/94] If you have a four-wheel drive vehicles with manual locking hubs, put transfer case lever in 2H, 4H, or 4L. *[RE15375(B F )05/95] When one of the back wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) or 1 (First).
File:ltref.ex Update:Thu May 9 15:24:41 1996 [RE15445( FM)05/95] On F-Super Duty vehicles, the parking brake is on the transmission. Therefore, the vehicle will not be prevented from moving when a rear wheel is lifted, even if the vehicle is in Park and the parking brake is applied. Be sure to block both directions of the wheel that is diagonally opposite to the wheel that is being lifted. *[RE15450( FM)05/95] RWARNING If the vehicle slips off the jack, you or someone else could be seriously injured.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE16800(BEF )12/91] 3. Use the tapered end of the lug nut wrench to unscrew wheel ornaments attached by retaining screws. Remove any wheel trim. Insert the tapered end of the lug nut wrench behind wheel covers or hubcaps and twist off. *[RE16900(BEF )10/89] 4. Loosen the wheel nuts by pulling up on the handle of the lug nut wrench about one-half turn (counterclockwise). Do not remove the wheel lug nuts until you raise the tire off the ground.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE17300(BEF )01/95] *[RE19200( F )01/89] 2. Positioning the jack a. To raise a front or rear wheel, place the jack as shown in the illustration that applies to your vehicle.
File:ltref.
File:ltref.
File:ltref.
File:ltref.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE21151(BEF )10/92] one third page art:0020939-B b. Turn the jack handle clockwise until the wheel is completely off the ground. *[RE21200( F )08/91] *[RE21400(BEF )01/95] 3. Remove the lug nuts with the lug nut wrench. *[RE21500(BEF )01/95] *[RE21600( EFM)01/89] 4. Replace the flat tire with the spare tire. [RE21800( EF )02/95] If your vehicle has single rear wheels, thread the lug nuts on the wheel studs with the beveled face toward the wheel.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE21900( EF )01/89] If your vehicle has dual rear wheels, thread the two-element swiveling lug nut on the wheel studs with the flange face toward the wheel. Use the lug nut wrench to screw the lug nut snugly against the wheel but do not tighten. *[RE22000( EF )05/90] quarter page art:0020310-A Single rear wheel nut *[RE22100( EFM)05/90] quarter page art:0020311-A Dual rear wheel nut *[RE22200(BEF )01/95] 5.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE22425( EF )05/90] quarter page art:0020317-A Lug nut tightening sequence *[RE22450( FM)03/94] quarter page art:0020319-C Lug nut tightening sequence *[RE23400(BEF )05/95] RWARNING Use of wheels or lug nuts other than original equipment could cause damage to the wheel or mounting system and allow the wheels to come off while the vehicle is in motion. *[RE23500(BEF )01/95] 7. Replace any wheel covers, ornaments, or hub caps that your vehicle has.
File:ltref.ex Update:Thu May 9 15:24:41 1996 [RE23615(BEF )02/95] 8. Put the tire, jack, and wrench away. (Make sure jack is securely fastened so it doesn’t rattle when you drive.) The carrier is designed to hold the temporary spare which comes with your vehicle. The stowage of a full size tire in the spare tire carrier may damage the tire or the vehicle. The flat full size tire should be stowed securely in the vehicle until it can be repaired. *[RE23700(BEF )01/95] *[RE24100( EFM)06/93] 9.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE24390( F )02/89] twelve pica chart:0020320-A *[RE24397(BEF )02/95] If the Engine Cranks But Does Not Start or Does Not Start After a Collision *[RE24400(BEF )04/95] *[RE24500(BEF )03/95] The Fuel Pump Shut-off Switch *[RE24600(BEF )01/95] For information on how to check and reset the fuel pump shut-off switch, see Fuel pump shut-off switch in the Index.
File:ltref.ex Update:Thu May 9 15:24:41 1996 [RE24700( ALL)05/95] * [RE24885( F)] Towing Your Vehicle If you need to have your vehicle towed, contact a professional towing service or, if you are a member, your roadside assistance center. The recommended method to tow your vehicle is with flatbed or wheel lift equipment. However, slingbelt towing is acceptable. On vehicles equipped with an air dam, the towbar will deform the rubber air dam.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE24950( ALL)] When calling for a tow truck, tell the operator what kind of vehicle you have. A towing manual is available from Ford Motor Company for all authorized tow truck operators. Have your tow truck driver refer to this manual for the proper hook-up and towing procedures for your vehicle.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE26300(B F )06/94] Towing Four-Wheel Drive Vehicles With a Lever-Operated Transfer Case *[RE26400(B F )06/94] ❑ Place transmission gearshift (automatic or *[RE26425(B F )06/94] ❑ Lock steering wheel straight ahead if vehicle *[RE26450(B F )12/89] ❑ Set manual locking hubs in FREE position or *[RE26475(B F )06/94] NOTE: Confirm by observation that the front driveshaft is not rotating prior to towing with the rear wheels off the ground.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE26650(B F )06/94] There are no wrecker or recreational vehicle towing restrictions on method or distance if the above preparations are made. *[RE26700(B F )06/94] ❑ Vehicle speed should not exceed 55 *[RE26800(B F )06/94] Towing Four-Wheel Drive Vehicles With Touch Drive Electric Shift Transfer Case *[RE26900(B F )06/94] ❑ Place transmission gearshift (automatic or *[RE27000(B F )05/90] *[RE27050(B F )05/90] ❑ Place transfer case in 2H.
File:ltref.ex Update:Thu May 9 15:24:41 1996 *[RE27400(B F )11/92] ❑ When towing your vehicle with the rear wheels on the ground or all four wheels on the ground and the driveshafts connected, do not exceed 35 mph (56 km/h) or transmission damage could result. If a distance of 50 miles (80 km) is exceeded, disengage the automatic locking hubs and disconnect the rear driveshaft from the axle and secure. (Max speed 55 mph [88 km/h] with driveshafts disconnected.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 Customer Assistance % *[HS00205( ALL)06/94] *[HS00210( ALL)05/95] Roadside Assistance Ford Motor Company has set up a 24-hour, seven-day-a-week hotline with trained operators that put you in touch with the help you need if you experience a problem with your vehicle. This complimentary service is provided to you throughout your warranty period of 3 years or 36,000 miles (3 years or 60,000 km), whichever comes first.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 *[HS00255( ALL)04/95] To receive roadside assistance in the United States call 1-800-241-FORD (in Canada call 1-800-665-2006). *[HS00260( ALL)04/95] Should you need to arrange for roadside assistance yourself, Ford Motor Company will reimburse the reasonable cost. To obtain information about reimbursement call 1-800-241-FORD (in Canada call 1-800-665-2006).
File:lthsf.ex Update:Thu May 9 15:20:42 1996 *[HS01010( ALL)04/95] % [HS01025( ALL)03/95] * In the U.S., contact: one inch art:0060100-E *[HS01050( ALL)03/95] If you live in Canada and have any questions or concerns that the dealership cannot answer, contact the Customer Assistance Centre.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 % The Dispute Settlement Board (U.S. Only) *[HS02400( ALL)03/95] The Dispute Settlement Board is a voluntary, independent dispute-settlement program available free to owners or lessees of qualifying Ford Motor Company vehicles. *[HS02500( ALL)01/95] The Dispute Settlement Board may not be available in all states.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 *[HS03600( ALL)01/95] ❑ Vehicles not used primarily for personal, *[HS03650( ALL)01/95] NOTE: Complaints involving vehicles on which applicable express written new vehicle warranties have expired at receipt of your application are not eligible. Eligibility may differ according to state law. For example, see the unique brochure for California purchasers/lessees.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 *[HS04400( ALL)04/95] Because the Board usually meets only once a month, some cases will take longer than 30 days to be reviewed. The Board will make every effort to resolve each case within 40 days after it receives the customer application form. *[HS04500( ALL)04/95] After your case has been reviewed, the Board will mail you its decision in writing. It will also provide you with a form to indicate your acceptance or rejection of an award decision.
File:lthsf.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 *[HS06310( ALL)04/95] Ford of Canada does not have a Dispute Settlement Board. If you have a problem that cannot be resolved by an agreement among you, Ford of Canada, and the Ford dealer, contact the Canadian Motor Vehicle Arbitration Plan (CAMVAP). In many areas of Canada, CAMVAP will help resolve the problem and, if necessary, will arrange for the matter to be arbitrated. *[HS06320( ALL)04/95] Reporting Safety Defects (U.S.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 % Getting Help Outside the U.S. and Canada *[HS06500( ALL)05/95] Before you export your vehicle to a foreign country, contact the appropriate foreign embassy or consulate to make sure local regulations do not prevent you from registering your vehicle. Officials at the embassy can also help you decide whether you should import your vehicle to that country. *[HS06600( ALL)05/95] Officials at the embassy or consulate can tell you where to get unleaded fuel.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 *[HS07100( ALL)05/95] If you are in other foreign countries, contact the nearest Ford dealership. If the dealership cannot help you, they can direct you to the appropriate Ford affiliate office. *[HS07200( ALL)05/95] If you buy your vehicle in North America and then relocate outside of the U.S. or Canada, register your Vehicle Identification Number and new address with Ford Motor Company Export Operations.
File:lthsf.ex Update:Thu May 9 15:20:42 1996 % Mediation/Arbitration Program (Canada Only) *[HS08200( ALL)03/95] In those cases where you continue to feel that the efforts by Ford and the dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation/arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
File:ltacf.ex Update:Thu May 9 15:14:47 1996 Accessories *[AC00400( ALL)03/95] *[AC00500( ALL)04/95] Ford Accessories for Your Vehicle A wide selection of accessories is available through your local authorized dealer. These fine accessories have been engineered specifically to fulfill your automotive needs. They are custom designed to complement the style and aerodynamic appearance of your Ford-built vehicle.
File:ltacf.
File:ltacf.ex Update:Thu May 9 15:14:47 1996 *[AC01600( F )04/95] sixteen pica chart:0020765-H *[AC01900( ALL)01/95] NOTE: When adding accessories, equipment, passengers, and luggage to your vehicle, do not exceed the total weight capacity of the vehicle or of the front or rear axle (GVWR, GAWR as shown on the Safety Compliance Certification Label). Consult your dealer for specific weight information.
File:ltacf.ex Update:Thu May 9 15:14:47 1996 *[AC02100( ALL)01/95] NOTE: Mobile communications systems may harm the operation of your vehicle, particularly if they are not properly designed for automotive use or are not properly installed. For example, when operated, such systems may cause the engine to stumble or stall. In addition, such systems may themselves be damaged or their operation affected by operating your vehicle.
File:ltacf.
File:ltacf.
File:ltacf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 Servicing Your F-Series % Service Made Easy *[SV00300( ALL)03/95] *[SV00400(BEF )01/95] *[SV00500(BEF )01/95] Ford has two goals for servicing your vehicle. 1. When we can, we design parts that do not need to be serviced. *[SV00600(BEF )01/95] 2. We want to make servicing your vehicle as easy as possible.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 vehicle. In addition to the conditions listed in the Owner Maintenance Checklist, be alert for any unusual noise, vibration, or other indication that your vehicle may need service. If you do notice something unusual, see that your vehicle is serviced promptly. *[SV01600(BEF )03/95] Precautions When Servicing Your Vehicle *[SV01700(BEF )01/95] Be especially careful when inspecting or servicing your vehicle.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV02600( ALL)03/95] *[SV02660(B F )05/95] Working with the engine off: 1. Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (First) (manual transmission). *[SV02675(B F )01/95] 2. When the transfer case is in the N (Neutral) position, the engine and transmission are disconnected from the rest of the driveline.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV02950(BEF )03/95] *[SV03000(B F )12/91] Opening the Hood 1. Pull the hood release handle, located next to the parking brake pedal. *[SV03050(BEF )12/91] 2. While applying downward pressure on the hood, push the hood latch handle located behind the grille near the center front of the vehicle to the left. *[SV03150(B F )01/89] 3. As you open the hood to its fullest extent, a clock spring will assist you and “snap” into position.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV03600(B F )06/93] half page art:0020337-E Hood and support *[SV03775(B F )12/89] NOTE: Be sure to oil the hood latch every six months to maintain smooth operation. *[SV03900(BEF )05/90] Always attempt to lift the hood after closing to be sure it is securely latched.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 % *[SV04500(BEF )04/95] *[SV04600(BEF )05/94] *[SV04700( EF )06/92] *[SV04750(BEF )05/89] *[SV05000( EF )05/89] *[SV05100( EF )05/89] *[SV05475( EF )05/94] *[SV05500(BEF )11/94] Engine Compartment Your vehicle has one of the following types of engines: ❑ A 4.9 Liter EFI, I-6 engine, or ❑ A 5.0 Liter EFI, V-8 engine, or ❑ A 5.8 Liter EFI, V-8 engine, or ❑ A 7.5 Liter EFI, V-8 engine. NOTE: Read the 7.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV05775( F )05/94] full page art:0020344-H 4.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV05800(B F )04/95] full page art:0020345-I 5.0L/5.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV05850( F )05/94] full page art:0020526-H 7.
File:ltsvf.
File:ltsvf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 [SV06975( ALL)05/95] If you lose the fuel cap, replace it with an authorized Motorcraft or equivalent part. *[SV07000( ALL)05/95] % RWARNING If you do not use the proper fuel cap, the pressure in the fuel tank can damage the fuel system or cause it to work improperly in a collision.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV07500( ALL)05/95] *[SV07550( EF )05/94] Choosing the Right Fuel *[SV07600( ALL)05/95] Use only UNLEADED FUEL in your vehicle. Using leaded fuel is prohibited by federal law. Your warranty may not apply if your vehicle is damaged because you used the wrong fuel. *[SV07700( ALL)05/95] Vehicle inspection programs may detect misfueling. Under these circumstances, you may be required by law to make costly repairs at your own expense.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV09200( ALL)05/95] Do not be concerned if your vehicle sometimes knocks lightly when you drive up a hill or when you accelerate. However, if a fuel with the recommended octane rating knocks heavily under all driving conditions or knocks lightly driving at cruising speed on level roads, see your dealer or a qualified service technician. Persistent, heavy knocking can damage the engine.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV09875( ALL)04/95] *[SV09900( ALL)05/95] Gasolines for clean air [SV09950( ALL)04/95] Reformulated gasoline is also required in certain areas of the U.S. These fuels are designed to further reduce the emissions from your vehicle. [SV10000( ALL)04/95] Generally, you should not experience difficulties operating your vehicle on reformulated gasoline or on fuels containing oxygenates. We encourage you to use these fuels.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 effects are noticed at first; the toxic effects of a gasoline-methanol blend, including blindness, may not become apparent for many hours. If gasoline is swallowed, do not induce vomiting. If a gasoline-methanol blend is swallowed, induce vomiting under the direction of a physician or poison control center. *[SV10215( ALL)03/95] Gasoline and gasoline-methanol blends may contain small amounts of carcinogens, such as benzene.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 beverage. In sensitive individuals, serious personal injury or sickness could result. Consult a physician promptly if you experience an adverse reaction. *[SV10300( ALL)02/95] *[SV10400( ALL)04/94] Filling the fuel tank RWARNING Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. *[SV10500( ALL)01/95] *[SV10550( ALL)01/95] To fill the fuel tank properly: *[SV10600( ALL)01/95] 1.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV11300( ALL)05/95] *[SV11400( ALL)05/95] Running Out of Fuel *[SV11500( ALL)05/95] You may need to crank the engine several times before the fuel system starts to pump fuel from the tank to the engine. *[SV11600( ALL)05/95] *[SV11700( ALL)05/95] Fuel Economy *[SV11750( ALL)05/95] Do not calculate fuel economy during your vehicle’s break-in period. This would not be an accurate estimate of how much fuel your vehicle will normally use.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV12300(BEF )05/95] Comparisons With EPA Fuel Economy Estimates *[SV12400(BEF )05/95] EPA fuel economy figures are obtained from laboratory tests under simulated road conditions and may not reflect the actual conditions you experience or your style of driving. The EPA fuel economy estimate is not a guarantee that you will achieve the fuel economy shown. *[SV12450( F )03/93] NOTE: There are no EPA fuel economy estimates for vehicles over 8500 lbs.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV13600( ALL)02/95] *[SV13610( ALL)04/95] Engine Oil Recommendations We recommend using Motorcraft oil or an equivalent oil meeting Ford Specification ESE-M2C153-E and displaying the American Petroleum Institute CERTIFICATION MARK on the front of the container.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV13730( EF )01/93] For vehicles with 4.9L, 5.0L or 7.5L engines [SV13740( ALL)04/95] Engine oils with an SAE 10W-30 viscosity are PREFERRED for your vehicle which provide the best engine protection for all climates down to -5˚F (-20˚C). SAE 5W-30 engine oils may also be used down to -15˚F (-25˚C). [SV13745( ALL)02/95] Synthetic engine oils which are CERTIFIED and of the preferred viscosity may be used in your engine.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV14400( ALL)05/94] quarter page art:0010364-D Engine oil dipstick *[SV14500( ALL)02/95] 6. Carefully, pull the dipstick out again. If the oil level is below the “ADD 1 QT.” line, add engine oil as necessary. If the oil level is beyond the letter “F” in FULL, engine damage or high oil consumption may occur and some oil must be removed from the engine. *[SV14600( ALL)01/95] 7. Put the dipstick back in and make sure it is fully seated.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV16300( EFM)01/95] *[SV16500( ALL)04/95] % Changing the Engine Oil and the Oil Filter Change the engine oil and oil filter per the following, whichever occurs first. *[SV16600(BEF )04/95] one third page art:0060618-C Oil change intervals *[SV16625( ALL)03/95] NOTE: Idling the engine for extended periods will accumulate more hours of use on your vehicles than is actually indicated by the mileage odometer.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV16700( EF )06/93] If your vehicle is over 8500 GVWR and the above conditions do not apply, change the engine oil and oil filter every 6 months or 5,000 miles (8,000 km), whichever comes first. *[SV16800( ALL)04/95] Refer to the Maintenance Schedule and Record booklet for additional information.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV17750( ALL)03/95] If the engine coolant has not been checked for a long period of time the engine coolant reservoir may eventually empty. If the engine coolant reservoir empties, check the engine coolant level in the radiator. Read the following warnings before removing the radiator cap. If it is necessary to fill the radiator, refer to the Engine Coolant Refill Procedure in this chapter for instructions.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV18500( ALL)05/95] RWARNING Never remove the coolant recovery cap while the engine is running or hot. *[SV18600( ALL)05/95] RWARNING Follow these steps to minimize risk of personal injury. *[SV18700( ALL)03/95] 1. Before you remove the cap, turn the engine off and let it cool. Even when the engine is cool, be careful when you remove the radiator cap. *[SV18800( ALL)03/95] 2.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV19801( ALL)02/95] Ford Premium Cooling System Fluid is an optimized formula that will protect all metals and rubber elastomers used in Ford engines for four years or 50,000 miles (80,000 km). It is not necessary and not recommended to use supplemental coolant additives in your gasoline powered vehicle. These additives may harm your engine cooling system. Follow the recommended service interval for changing your engine coolant.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV20001( ALL)01/95] Use Ford Premium Cooling System Fluid or an equivalent engine coolant that meets Ford Specification ESE-M97B44-A. Do not use alcohol or methanol antifreeze and do not use engine coolant mixed with alcohol or methanol antifreeze. If you do not use the proper coolant, the aluminum radiator on your vehicle will corrode. *[SV20100( ALL)01/95] Leave the engine coolant in all year.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV20700( ALL)05/95] *[SV20800( ALL)10/89] *[SV20900( ALL)03/94] Engine coolant drain and flush 1. Turn off the engine and let it cool. Fully depressurize the engine cooling system by covering the radiator cap with a thick cloth and turning it slowly counterclockwise to the first stop. Step back while the pressure releases. *[SV20950( ALL)05/90] *[SV21000(B FM)05/90] 2. Remove the cap. 3.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV22100( ALL)10/89] 3. Start and idle the engine until the thermostat opens and the radiator upper hose becomes warm. *[SV22200( ALL)05/95] 4. Shut off the engine and allow the engine to cool. Cover the radiator cap with a thick cloth and cautiously remove it. Step back while the pressure releases. *[SV22500( ALL)10/89] 5. Finally, check the radiator and add more engine coolant if needed, following the procedures noted above.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV23600(B F )02/92] quarter page art:0020360-C Adding windshield washer fluid % Use specially formulated windshield washer fluid rather than plain water, because specially formulated washer fluids contain additives that dissolve road grime. For safety reasons, washer fluids containing an appropriate antifreeze such as methanol should be used in freezing weather (temperatures below 32˚F [0˚C]).
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV24500(BEF )03/95] *[SV24600(BEF )03/95] Wiper Blades *[SV24700(BEF )03/95] If the blades do not wipe properly, clean both the windshield and the wiper blades. Use undiluted windshield washer solution or a mild detergent. Rinse thoroughly with clear water. Do not use fuel, kerosene, paint thinner, or other solvents to clean your wiper blades. These will damage your blades.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV25500(BEF )02/95] ❑ Stay within the recommended load limits (see *[SV25600( ALL)02/95] ❑ Make sure the weight of your load is evenly *[SV25700( ALL)10/89] *[SV25800( ALL)01/95] ❑ Drive at safe speeds. *[SV25875( ALL)05/95] *[SV25900( ALL)05/95] Load limits in the Index). distributed. If you do not take these precautions, your tires may fail or go flat. Ford Motor Company recommends obeying posted speed limits.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 permit air to leak from the tire, and make the necessary repairs. *[SV26400( ALL)10/89] Inspect the tire side walls for cuts, bruises and other damage. If you suspect internal damage to the tire, have it demounted and checked. You may need to repair or replace it.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV26450(BEF )03/95] *[SV26460(BEF )03/95] Traction-Lok Rear Axle (If equipped) This axle provides added drive away traction on slippery surfaces, particularly when one or more wheels are on a surface with poor traction. *[SV26470(BEF )05/95] RWARNING To avoid injury, never run the engine with one wheel off the ground, such as when changing a tire.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV26800(BEF )06/93] half page art:0020364-A Tire rotation pattern *[SV26900(BEF )10/89] After each rotation, adjust individual tire pressure as specified on the Safety Compliance Certification Label. Tighten wheel lug nuts to the required torque specification and retighten again after 500 miles (800 km).
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV27300( ALL)04/95] *[SV27400( ALL)01/95] % Replacing the Tires Replace any tires that show wear bands. When your tire shows a wear band, it has only 1/16 inch (1.59 mm) of tread left. *[SV27500( ALL)10/89] quarter page art:0060006-A Wear band *[SV27600( ALL)01/95] Because your vehicle’s tires may wear unevenly, you may need to replace them before a wear band appears across the entire tread. Some spots wear more heavily than others.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV27860( ALL)03/90] RWARNING Make sure that all replacement tires are of the same size, type, load-carrying capacity, and tread design (e.g. “All Terrain”, etc.), as originally offered by Ford. *[SV27885( ALL)04/95] RWARNING Do not replace your tires with “high performance” tires or larger size tires. *[SV27892( EF )05/95] RWARNING Use of aftermarket wheel assemblies may damage your vehicle or cause accidents resulting in serious injuries.
File:ltsvf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV28750( EF )11/90] RWARNING To avoid possible serious or fatal bodily injury while mounting tires, mount LT Metric 16-inch radial tires only on 16-inch rims and not 16.5-inch rims. In addition, mount radial tires only on wheels approved for radial tires. *[SV28800( ALL)04/95] *[SV28900( ALL)03/95] Wheel and Tire Matching *[SV31100(BEF )04/95] *[SV31200(BEF )01/95] Snow Tires and Chains % See an authorized tire dealer for proper servicing procedures.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV31700(BEF )01/95] ❑ Drive slowly. If you can hear the chains rub *[SV31800(BEF )10/94] *[SV31900(BEF )05/94] ❑ Avoid fully loading your vehicle if possible. ❑ Remove tire chains at the first opportunity *[SV31950(BEF )05/91] ❑ Make sure your suspension insulation and *[SV31975(BEF )04/95] *[SV31980(BEF )05/95] Cleaning the Wheels *[SV31985(BEF )04/95] NOTE: Before going to a car wash, find out if the brushes are abrasive.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV31993( F )04/95] 2. You can brighten the wheels, even after years of use, with readily-available buffing compounds, such as Ford Custom Bright Metal Cleaner or equivalent. Follow the buffing instructions that come with the compound. *[SV31995( F )04/95] 3. When tires are removed, the entire wheel must be cleaned and inspected. Remove any soil or oxidation products from the tire side of the rim with a wire brush. *[SV31997( F )04/95] 4.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 with distilled water. If the battery needs water quite often, have the charging system checked for a possible malfunction. *[SV32725( ALL)03/95] *[SV32750( ALL)04/95] % Help Us Protect Our Environment Ford Motor Company strongly recommends that used lead-acid batteries be returned to an authorized recycling facility for disposal.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV33400( ALL)05/95] % RWARNING Applying too much pressure on the ends when lifting a battery could cause acid to spill. Lift the battery with a carrier or with your hands on the opposite corners. *[SV33500( ALL)01/95] *[SV33601( ALL)04/95] Automatic Transmission Fluid Under normal driving conditions automatic transmission fluid should be changed every 30,000 miles (48,000 km) or 21,000 miles (34,000 km) if under severe duty conditions.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 [SV33645( ALL)04/95] NOTE: Use of a transmission fluid other than specified could result in transmission malfunction and/or failure. Refer to “Adding automatic transmission fluid”, “Refill capacities” and “lubricant specifications” for further information.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV33930( ALL)10/89] RWARNING Your vehicle should not be driven if the fluid level is below the bottom hole on the dipstick and outside temperatures are above 50˚F (10˚C). *[SV33940( ALL)02/95] Wipe off the dipstick cap, pull the dipstick out and wipe the indicator end clean. Put the dipstick back into the filler tube and make sure it is fully seated. Pull the dipstick out and read the fluid level.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV34000(B FM)06/92] quarter page art:0020372-E Automatic transmission dipstick *[SV34100( EF )03/94] one third page art:0020946-A Automatic transmission dipstick [SV34400(B F )01/95] Manual Transmission and Transfer Case Fluid [SV34600(B F )01/95] Checking the fluid *[SV34700(B F )12/91] Clean the filler plug on the side of the case. Remove the filler plug. The fluid level should be up to the bottom of the filler plug hole.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV35000(B F )03/91] 2. % The Clutch *[SV35100(B F )02/95] *[SV35200(B F )03/91] *[SV35301(B F )03/91] *[SV35400(B F )03/94] % Replace the filler plug in its original position, making sure it is fully seated. The clutch on your vehicle is automatically self-adjusting and should not require any routine service. During normal operation the fluid level in the clutch reservoir will slowly rise.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV35800( ALL)03/91] Driveline Universal Joint and Slip Yoke *[SV36000(BEF )06/93] The universal joints that come standard with your vehicle do not require lubrication. If your original equipment universal joints are replaced with universal joints equipped with grease fittings, lubrication will be necessary at the intervals shown in the Maintenance Schedule and Record booklet.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV36500( ALL)10/89] Check the brake fluid at least once a year. You can do this by looking at the fluid level in the plastic reservoir on the master cylinder. The fluid level should be at or near the MAX mark. *[SV36550( ALL)05/95] RWARNING Brake fluid is toxic. *[SV36560( ALL)05/95] If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV37200( ALL)01/95] RWARNING Do not let the reservoir for the master cylinder run dry. This may cause the brakes to fail. *[SV37400(BEF )01/89] quarter page art:0020381-A Brake master cylinder *[SV37600( ALL)03/95] *[SV37700( ALL)01/95] Power Steering Fluid Check the level of the power steering fluid at least twice a year (i.e., every Spring and Fall). *[SV37800( ALL)03/95] *[SV37900( ALL)02/95] To check the level of your power steering fluid: 1.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV38200( ALL)03/94] % 4. Check the fluid level on the dipstick (which is highlighted in yellow in your vehicle). The fluid level should be between the arrows in the FULL HOT range, which is marked on the side of the dipstick, opposite the side marked FULL COLD. Do not add fluid if the level is within the FULL HOT range.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV38900(BEF )01/95] *[SV39000(BEF )01/95] Use only power steering fluid that: *[SV39200( ALL)01/95] If the power steering fluid is low, do not drive your vehicle for a long period of time before adding fluid. This can damage the power steering pump. *[SV39300( ALL)03/95] 6. *[SV39400( ALL)02/95] If you check the power steering fluid when it is cold, make sure that the fluid reaches the FULL COLD range on the dipstick.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV39500( ALL)04/95] Fuses, Fuse Links and Circuit Breakers *[SV39650(B FM)12/91] Fuses, circuit breakers and fuse links protect your vehicle’s electrical system from overloading. If electrical parts in your vehicle are not working, the system may have been overloaded and blown a fuse or tripped a circuit breaker. Before you replace or repair any electrical parts, check the appropriate fuses or circuit breakers.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV41300( ALL)10/92] *[SV41400( ALL)10/92] Power distribution box *[SV41500( ALL)10/92] The high current fuses are coded as follows: 30 amp -light green, 40 amp - orange, 50 amp - red, 60 amp -blue. *[SV41600( ALL)05/95] RWARNING The high current fuses contained in the Power Distribution Box protect your vehicle’s main electrical systems from overloads; these fuses provide the connection between the battery and your vehicle’s electrical systems.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV42200( ALL)05/95] *[SV42300( ALL)02/95] *[SV42800(B F )03/91] % Checking and Replacing Fuses If you need to check a fuse, follow these steps: 1. In order to find the fuse panel, you must first remove the cover from the lower edge of the instrument panel. You can do this by pulling on handle to disengage the fasteners. *[SV42900(B F )03/91] one third page art:0020475-B Fuse panel cover *[SV43300( ALL)10/94] 2.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV43500( ALL)10/92] quarter page art:0020405-A The side view of a fuse *[SV43600( ALL)10/92] 4. Replace the fuse with one that has the right amperage rating (see previous chart). *[SV43700( ALL)05/95] RWARNING Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. *[SV43800( ALL)10/92] *[SV44000( ALL)05/93] 5.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV44400( ALL)10/92] However, you should know that the circuit breakers will reset themselves and allow the electrical parts to work again once the overload on the circuit is removed. If the circuit breakers continue to cut off electricity, have your vehicle’s electrical system checked. *[SV44500( ALL)02/95] If you replace a circuit breaker, use one with the same amperage rating.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV45800(BEF )03/95] *[SV45900(BEF )01/95] Headlamp Bulb The headlamps on your vehicle use replaceable bulbs. When the lamp burns out, simply replace the bulb, rather than the whole lamp. *[SV46000(BEF )05/95] RWARNING Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV46300(BEF )03/95] *[SV46400(BEF )01/95] Removing the headlamp bulb 1. Make sure that the headlamp switch on the instrument panel is in the OFF position. *[SV46501(B F )12/91] 2. Lift the hood and behind the headlamp remove the electrical connector by grasping the wires and pulling rearward. *[SV46700(B F )04/95] 3. Remove the bulb retaining ring by turning it 1/8 of a turn to free it from the socket. Then slide the ring off the plastic base.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV47310(B F )02/95] *[SV47320(B F )03/95] *[SV47330(B F )03/93] High-Mount Brakelamp Bulbs 1. Remove the two screws from the surface of the lens. *[SV47340(B F )03/93] 2. After removing the screws, remove the lamp assembly. *[SV47350(B F )03/93] 3. Remove the socket by rotating it 45˚ and pulling it out of the lamp that contains the burned-out bulb and replace the bulb.
File:ltsvf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV48100( F )06/92] eighteen pica chart:0020413-F % *[SV48600( ALL)03/95] *[SV48700(BEF )05/95] Emission Control System Your vehicle is equipped with a catalytic converter which enables your vehicle to comply with applicable exhaust emission requirements. *[SV48725(ALL )05/95] RWARNING Exhaust leaks may result in the entry of harmful and potentially lethal fumes into the passenger compartment.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV48800(BEF )05/95] To make sure that the catalytic converter and the other emission control parts continue to work properly: *[SV48900( ALL)01/95] *[SV49000( ALL)01/95] *[SV49100( ALL)01/95] ❑ Use only unleaded fuel. ❑ Avoid running out of fuel.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV49450( ALL)05/95] If other than Ford or Motorcraft or Ford authorized remanufactured parts are used for maintenance, replacement, or for the service of components affecting emissions control, the owner should be assured that such parts are warranted by their manufacturer to be equivalent to genuine Ford Motor Company parts in performance and durability. Please consult your warranty information booklet for complete warranty information.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV50050( EF )10/90] NOTE: All current model year vehicles are certified to the same year emissions standards except certain vehicles equipped with engines built prior to January 1 of the model year which may be certified to prior year emissions standards. In either case, the maintenance schedules contained in the back of this Owner Guide must be used to maintain your engine.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV50800( EFM)01/89] The following are some of the acts that are considered tampering: *[SV50900( FM)01/89] ❑ Removing the hood blanket, fender apron *[SV51100( EFM)01/89] ❑ Removing or dismantling the engine speed *[SV51200( EFM)01/89] ❑ Removing the air duct, air intake choke or *[SV51300( EFM)01/89] ❑ Removing or dismantling any of the exhaust *[SV51400( EFM)01/89] ❑ Removing the fan shroud.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 % Readiness for Inspection/Maintenance Testing *[SV51457( ALL)05/95] In some localities it may become a legal requirement to pass an Inspection/Maintenance (I/M) test of the On-Board Diagnostic (OBD) II system. If the vehicle’s powertrain system or its battery has just been serviced, the OBD II system is reset to a not ready for I/M testing condition.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV51467( ALL)05/95] 4. Drive the vehicle with a steady throttle at 45 mph (72 km/h) for 30 seconds. [SV51469( ALL)04/95] 5. Idle the vehicle in drive (neutral for manual transmissions) for 40 seconds. *[SV51471( ALL)05/95] 6. Continue to drive the vehicle in city traffic at speeds between 25 and 40 mph (40-64 km/h) for 15 minutes. During the 15 minute drive cycle the following modes must be achieved: *[SV51473( ALL)05/95] a.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV51500( ALL)03/95] Refill Capacities, Motorcraft Parts, and Lubricant Specifications *[SV51600( ALL)03/95] *[SV51650( EF )05/89] Refill Capacities NOTE: Refer to the Diesel Engine Owner’s Guide Supplement for refill capacities on diesel engines.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 % *[SV56000( ALL)01/95] *[SV56100( ALL)01/95] *[SV56150( ALL)01/95] Vehicle Storage Maintenance Tips If you plan on storing your vehicle for an extended period of time (60 days or more), refer to the following maintenance recommendations to ensure your vehicle stays in good operating condition.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV57350( ALL)01/95] *[SV57400( ALL)01/95] Engine *[SV57500( ALL)01/95] ❑ With your foot on the brake, shift through all *[SV57600( ALL)01/95] *[SV57700( ALL)07/94] Fuel system *[SV57900( ALL)03/95] NOTE: During extended periods of vehicle storage (60 days or more), fuel may deteriorate due to oxidation. This can damage rubber and other polymers in the fuel system and may also clog small orifices.
File:ltsvf.ex Update:Thu May 9 15:30:19 1996 *[SV58400( ALL)01/95] *[SV58500( ALL)01/95] *[SV58600( ALL)01/95] Battery *[SV58700( ALL)01/95] *[SV58800( ALL)01/95] Brakes *[SV58900( ALL)01/95] *[SV59000(B FM)05/95] *[SV59100( ALL)01/95] *[SV59200( ALL)01/95] Tires *[SV59300( ALL)03/95] ❑ Move vehicles at least 25 feet (8 m) every 15 % % % ❑ Check and recharge as necessary. ❑ Keep connections clean and covered with a light coat of grease. ❑ Make sure brakes and parking brake are fully released.
File:ltqif.
File:ltqif.
File:ltqif.
File:ltqif.
File:ltqif.
File:ltqif.
File:ltqif.
File:ltqif.
