Car Owners Manual

Theft indicator
The theft indicator on the instrument cluster will
operate as follows:
When the ignition is OFF, the theft indicator will
flash briefly every 2 seconds to indicate the
SecuriLocky system is protecting your vehicle.
When the ignition is turned to RUN or START, the
theft indicator will light for 3 seconds and then go
out. If the theft indicator stays on for an extended
period of time or flashes rapidly, have the system
serviced by your dealership or a qualified technician.
Programming spare SecuriLockY keys
Spare SecuriLocky keys can be purchased from
your dealership and programmed to your
SecuriLocky passive anti-theft system (up to a total
of 8 keys). Your dealership can program your new
SecuriLocky key(s) to your vehicle or you can do it
yourself using the following simple procedure. To
program a new SecuriLocky key yourself, you will
need two previously programmed SecuriLocky keys
(keys that already operate your vehicle’s engine). If
two previously programmed SecuriLocky keys are
not available (one or both of your original keys were
lost or stolen), you must bring your vehicle to your
dealership to have the spare SecuriLocky key(s)
programmed.
Procedure to program spare SecuriLockY keys
to your vehicle
New SecuriLocky keys must have the correct
mechanical key cut for your vehicle.
Conventional (non-SecuriLocky) keys cannot be
programmed to your vehicle.
You will need to have two previously programmed
SecuriLocky keys and the new unprogrammed
SecuriLocky key readily accessible for the
procedure. Please read and understand the entire
procedure before you begin.
Controls and features
61