Instruction Manual

NO KEY DETECTED (if equipped) — Displayed if the intelligent

access key is not detected by the system in the following three scenarios:

•When the start/stop button is pressed in an attempt to either start the

engine or cycle through the ignition states.

•When the engine is running and a door is opened then closed.

•When the vehicle’s speed exceeds 10 mph (16 km/h) for the first time

after starting. Refer to Push button start system in the Driving chapter

for more information.

PRESS BRAKE TO START (if equipped) — Displayed when the

start/stop button is pressed without the brake pedal being applied. This

is a reminder that the brake pedal must be applied when the start/stop

button is pressed in order to start the engine.

RESTART NOW OR KEY IS NEEDED (if equipped) — Displayed

when the start/stop button is pressed to shut off the engine and a

Intelligent Access Key is not detected inside the vehicle. Refer to Push

button start system in the Driving chapter for more information.

SPEED LIMITED TO 130 KM/H — Displayed when starting the

vehicle and MyKey™ is in use and the MyKey speed limit is on. Refer to

MyKey™ in the Locks and Security chapter for more information.

SPEED LIMITED TO 80 MPH — Displayed when starting the vehicle

and MyKey™ is in use and the MyKey speed limit is on. Refer to

MyKey™ in the Locks and Security chapter for more information.

STARTING SYSTEM FAULT — This message is displayed when there

is a problem with your vehicle’s starting security system; your vehicle

will not be able to start. See your authorized dealer for service.

VEHICLE AT TOP SPEED OF MYKEY SETTING — Displayed when

a MyKey™ is in use and the MyKey speed limit is on and the vehicle

speed is 80 mph (130 km/h). Refer to MyKey™ in the Locks and

Security chapter for more information.

VEHICLE NEAR TOP SPEED — Displayed when a MyKey™ is in use

and the MyKey speed limit is on and the vehicle speed is approaching

80 mph (130 km/h). Refer to MyKey™ in the Locks and Security

chapter for more information.

BLIND SPOT NOT AVAILABLE SENSOR BLOCKED (if equipped)

— Displayed when the blind spot information system/cross traffic alert

system sensors are blocked. See Blind Spot Information System

(BLIS威) with Cross Traffic Alert in the Driving chapter.

BLIND SPOT SYSTEM FAULT (if equipped) — Displayed when a

fault with the blind spot information system has occurred. Contact your

authorized dealer as soon as possible.

Instrument Cluster

2011 Edge (edg)

Owners Guide, 2nd Printing

USA (fus)