2016 E-SERIES Owner’s Manual 2016 E-SERIES Owner’s Manual fordowner.com ford.ca March 2015 First Printing Owner’s Manual E-Series Litho in U.S.A.
The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2015 All rights reserved.
Table of Contents Introduction Keys and Remote Controls About This Manual...........................................5 Symbols Glossary.............................................5 Data Recording..................................................7 California Proposition 65...............................9 Perchlorate..........................................................9 Ford Credit...........................................................9 Replacement Parts Recommendation..............................
Table of Contents Information Displays Brakes General Information......................................55 Information Messages.................................60 General Information.....................................88 Hints on Driving With Anti-Lock Brakes............................................................88 Parking Brake..................................................89 Climate Control Manual Climate Control..............................63 Hints on Controlling the Interior Climate........
Table of Contents Changing a Bulb...........................................150 Bulb Specification Chart............................152 Changing the Engine Air Filter.................154 Jump Starting the Vehicle..........................118 Customer Assistance Getting the Services You Need.................121 In California (U.S. Only)..............................122 The Better Business Bureau (BBB) Auto Line Program (U.S. Only).......................
Table of Contents Capacities and Specifications 6.8L..............................................................200 Audio System General Information...................................205 Audio Unit - Vehicles With: AM/FM......206 Audio Unit - Vehicles With: AM/FM/CD/ SYNC............................................................207 Digital Radio...................................................210 Satellite Radio................................................212 USB Port..............................
Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Introduction Brake system Fasten safety belt Cabin air filter Front airbag Check fuel cap Front fog lamps Child safety door lock or unlock Fuel pump reset Child seat lower anchor Fuse compartment Child seat tether anchor Hazard warning flashers Cruise control Heated rear window Do not open when hot Heated windshield Engine air filter Interior luggage compartment release Engine coolant Jack Engine coolant temperature Keep out of reach of children E71340 E161353 Engine oil Lighting co
Introduction systems. In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may access or share among them vehicle diagnostic information received through a direct connection to your vehicle when diagnosing or servicing your vehicle. Additionally, when your vehicle is in for service or repair, Ford Motor Company, Ford of Canada, and service and repair facilities may access or share among them data for vehicle improvement purposes.
Introduction • • How fast the vehicle was traveling; and Where the driver was positioning the steering wheel.
Introduction REPLACEMENT PARTS RECOMMENDATION CALIFORNIA PROPOSITION 65 WARNING Your vehicle has been built to the highest standards using quality parts. We recommend that you demand the use of genuine Ford and Motorcraft parts whenever your vehicle requires scheduled maintenance or repair. You can clearly identify genuine Ford and Motorcraft parts by looking for the Ford, FoMoCo or Motorcraft branding on the parts or their packaging.
Introduction Warranty on Replacement Parts remote vehicle diagnostics, telematics or engine reprogramming, may cause interference or damage to vehicle systems. We do not recommend or endorse the use of any non-Ford-approved aftermarket OBD plug-in devices. The vehicle Warranty may not cover damage caused by any non-Ford-approved aftermarket OBD plug-in device. Genuine Ford and Motorcraft replacement parts are the only replacement parts that benefit from a Ford Warranty.
Introduction Use of your Ford light truck as an ambulance, without the Ford Ambulance Preparation Package voids the Ford New Vehicle Limited Warranty and may void the emissions warranties. In addition, ambulance usage without the preparation package could cause high underbody temperatures, over-pressurized fuel and a risk of spraying fuel, which could lead to fires. WARNING Driving while distracted can result in loss of vehicle control, crash and injury.
Environment PROTECTING THE ENVIRONMENT You must play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim.
Child Safety GENERAL INFORMATION WARNINGS is compatible with and properly installed in your vehicle. To locate a child seat fitting station and CPST, contact the NHTSA toll free at 1-888-327-4236 or go to http://www.nhtsa.dot.gov. In Canada, check with your local St. John Ambulance office for referral to a CPST or for further information, contact your provincial ministry of transportation, locate your local St. John Ambulance office by searching for St.
Child Safety Recommendations for Safety Restraints for Children Child Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat). Small children Children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 ft. 9 in. (1.
Child Safety • Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers, or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). • Using Lap and Shoulder Belts Place the vehicle seat upon which the child seat will be installed in the upright position. Put the safety belt in the automatic locking mode. See Step 5. This vehicle does not require the use of a locking clip.
Child Safety E142530 E142875 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer's instructions. Be sure the belt webbing is not twisted. 5. To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is pulled out. 6. Allow the belt to retract to remove slack. The belt will click as it retracts to indicate it is in the automatic locking mode.
Child Safety weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped).
Child Safety 2. Route the child safety seat tether strap over the back of the front passenger seat as shown. Use a belt-positioning booster seat for children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 feet 9 inches (1.
Child Safety Types of Booster Seats E70710 • E68924 • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child's head (as measured at the tops of the ears) above the top of the seat.
Child Safety E142597 WARNINGS warnings provided by your vehicle manufacturer. A safety seat that is improperly installed or utilized, is inappropriate for your child's height, age, or weight or does not properly fit the child may increase the risk of serious injury or death. If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition.
Child Safety Recommendations for attaching child safety restraints for children Use any attachment method as indicated below by X. Restraint Type Combined weight of child and child seat Safety belt and top tether anchor Safety belt only Rear-facing child seat Up to 65 lb (29.5 kg) X Rear-facing child seat Over 65 lb (29.5 kg) X Forward-facing child seat Up to 65 lb (29.5 kg) X Forward-facing child seat Over 65 lb (29.
Safety Belts PRINCIPLE OF OPERATION WARNINGS When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNINGS Always drive and ride with the seat backrest upright and the lap belt snug and low across the hips. Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child.
Safety Belts The safety belt pretensioners at the front seating positions are designed to tighten the safety belts when activated. In frontal and near-frontal crashes, the safety belt pretensioners may be activated alone or, if the crash is of sufficient severity, together with the front airbags. 2. To unfasten, press the release button and remove the tongue from the buckle. FASTENING THE SAFETY BELTS Always ride and drive with your seatback upright and the safety belt properly fastened.
Safety Belts Safety Belt Locking Modes Automatic Locking Mode WARNINGS After any vehicle crash, the safety belt system at all passenger seating positions must be checked by an authorized dealer to verify that the automatic locking retractor feature for child seats is still functioning properly. In addition, all safety belts should be checked for proper function. In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt.
Safety Belts How to Disengage the Automatic Locking Mode Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder. Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Safety Belt Extension Assembly WARNING Do not use extensions to change the fit of the shoulder belt across the torso.
Safety Belts Conditions of operation If... Then... The driver's safety belt is not buckled before the ignition switch is turned to the on position... The safety belt warning light illuminates 12 minutes and the warning chime sounds 4-8 seconds. The driver's safety belt is buckled while the indicator light is illuminated and the warning chime is sounding... The safety belt warning light and warning chime turn off.
Supplementary Restraints System The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag. PRINCIPLE OF OPERATION WARNINGS Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module.
Supplementary Restraints System Passenger Airbag On and Off Switch (If Equipped) DRIVER AND PASSENGER AIRBAGS WARNING WARNINGS Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury. An airbag on and off switch may be installed in this vehicle.
Supplementary Restraints System WARNINGS equipped with an airbag on and off switch and the passenger airbag is turned off. This is because the back of the infant seat is too close to the inflating airbag and the risk of a fatal injury to the infant when the airbag inflates is substantial. If the off light is illuminated when the passenger airbag switch is in the on position and the ignition switch is in on, have the passenger airbag switch serviced at an authorized dealer immediately. E190813 1.
Supplementary Restraints System The vast majority of drivers and passengers are much safer with an airbag than without. To do their job and reduce the risk of life threatening injuries, airbags must open with great force, and this force can pose a potentially deadly risk in some situations, particularly when a front seat occupant is not properly buckled up.
Supplementary Restraints System • • • Transport Canada Deactivation Criteria (Canada Only) The vehicle has no rear seat. Although children ages 1 to 12 ride in the rear seat(s) whenever possible, children ages 1 to 12 sometimes must ride in the front because no space is available in the rear seat(s) of the vehicle.
Supplementary Restraints System • • • After all occupants have adjusted their seats and put on safety belts, it is very important that they continue to sit properly. Properly seated occupants sit upright, lean against the seat back, and center themselves on the seat cushion, with their feet comfortably extended on the floor. Sitting improperly can increase the chance of injury in a crash event.
Supplementary Restraints System If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash. CRASH SENSORS AND AIRBAG INDICATOR WARNING Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury.
Keys and Remote Controls Note: The remote control contains sensitive electrical components. Exposure to moisture or impact may cause permanent damage. GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Keys and Remote Controls Note: Do not apply the brake pedal during this procedure. 1. 2. 3. 4. 5. Switch the ignition from off to on 8 times within 10 seconds, finishing in the off position. The doors lock then unlock to confirm that programming has started. Press any button on the remote control that you want to program within 20 seconds. The doors lock then unlock to confirm that programming was successful. Repeat step 2 to program each additional remote control.
Keys and Remote Controls REPLACING A LOST KEY OR REMOTE CONTROL Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 40). To re-program the passive anti-theft system see an authorized dealer. E195661 3. Insert the new battery. Refer to the symbols inside the transmitter for the correct orientation of the battery. Press the battery down to make sure it is fully in the housing. 4.
Locks Press the button again within three seconds to unlock all doors. The direction indicators flash. LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock your vehicle. Note: The driver door can be unlocked with the key if the remote control is not functioning. Power Door Locks (If Equipped) Note: When you leave your vehicle unattended for several weeks, the remote control turns off. Your vehicle must be unlocked and started.
Locks Autolock Feature 5. Switch the ignition on. The horn sounds indicating your vehicle is in programming mode. 6. Press the power door unlock control and within five seconds, press the power door lock control. The horn sounds once if disabled or twice if enabled. 7. Switch the ignition off. The horn sounds indicating programming is complete. Note: You can also switch this feature on or off using the information display. See Information Displays (page 55).
Locks The lamps turn off if: • The ignition is on. • You press the remote control lock button. • 25 seconds have elapsed. The lamps do not turn off if: • You switch them on with the lighting control. • Any door is open.
Security Automatic Disarming PASSIVE ANTI-THEFT SYSTEM Switching the ignition on with a correctly coded key disarms the engine immobilization system. Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Replacement Keys The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control.
Security 1. 2. 3. 4. 5. 6. 7. 8. 9. Insert the first previously programmed correctly coded key into the ignition. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. Switch the ignition off and remove the first correctly coded key from the ignition. After three seconds but within 10 seconds of switching the ignition off, insert the second previously correctly coded key into the ignition. Switch the ignition from off to on.
Steering Wheel CRUISE CONTROL ADJUSTING THE STEERING WHEEL WARNING Do not adjust the steering wheel when your vehicle is moving. E161518 2 See Cruise Control (page 91). 1 E161517 1. Pull and hold the steering wheel release lever. 2. Adjust the steering wheel to the desired position then release the lever. VOICE CONTROL (If Equipped) E193397 Push the control to select or deselect voice control. See SYNC™ (page 216).
Wipers and Washers WINDSHIELD WIPERS Press the end of the stalk to activate the washer. Note: Fully defrost the windshield before switching on the windshield wipers. • Note: Make sure the windshield wipers are switched off before entering a car wash. • Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that doesn't resolve the issue, install new wiper blades. See Changing the Wiper Blades (page 146). • A brief press causes a single wipe without washer fluid.
Lighting GENERAL INFORMATION LIGHTING CONTROL Condensation in Lamp Assemblies A Exterior lamps have vents to accommodate normal changes in air pressure. P B C Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens.
Lighting Headlamp Flasher DAYTIME RUNNING LAMPS (If Equipped) WARNING Always remember to switch your headlamps on in low light situations or during inclement weather. The system does not activate the tail lamps and may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision. E161458 Pull the lever toward you slightly and release it to flash the headlamps.
Windows and Mirrors POWER WINDOWS (If Equipped) EXTERIOR MIRRORS WARNINGS Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. Power Exterior Mirrors WARNING Do not adjust the mirrors when your vehicle is moving. When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings. B A C E163059 E163056 A Left mirror.
Windows and Mirrors Telescoping Mirrors (If Equipped) C E163061 This feature lets you extend the mirror about 3 in (75 mm). It is useful when towing a trailer. You can manually pull out or push in the mirrors to the desired position. B Integrated Blind Spot Mirror (If A Equipped) WARNING E138665 Objects in the blind spot mirror are closer than they appear. The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance.
Windows and Mirrors Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia-based cleaning products. You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point. This lets you move the mirror head up or down and from side to side. Pull the tab below the mirror toward you to reduce glare at night. Auto-Dimming Mirror (If Equipped) Note: Do not block the sensors on the front and back of the mirror.
Instrument Cluster GAUGES E194283 A Tachometer. B Fuel gauge. C Engine coolant temperature gauge. D Speedometer. E Battery voltage gauge. F Information display. See Information Displays (page 55). G Engine oil pressure gauge. Switch the ignition on. The fuel gauge indicates approximately how much fuel you have left in the fuel tank. The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Instrument Cluster The needle should move toward F when you refuel your vehicle. If the needle points to E after adding fuel, have an authorized dealer check the system soon. • • After refueling, some variability in the position of the needle is normal: • • If the gas station nozzle shuts off before the tank is full, try a different gas pump nozzle. There is a small reserve left in the tank when the fuel gauge reaches empty.
Instrument Cluster Anti-Theft System Trip Computer See Information Displays (page 55). Vehicle Settings and Personalization E144845 See Information Displays (page 55). Battery Engine Oil Pressure Gauge If it illuminates while driving, it indicates a malfunction. Switch off all unnecessary electrical equipment and have an authorized dealer check the system immediately. Indicates the engine oil pressure. The needle should stay in the normal operating range.
Instrument Cluster Low Fuel Level Cruise Control (If Equipped) E71340 It illuminates when the fuel level is low or near empty. Refuel as soon as possible. Illuminates when you switch this feature on. See Using Cruise Control (page 91). Direction Indicator Low Tire Pressure Warning Illuminates when you switch on the left or right direction indicator or the hazard warning flasher. If the indicators stay on or flash faster, check for a burned out bulb. It illuminates when your tire pressure is low.
Instrument Cluster Transmission Tow/Haul If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have an authorized dealer check your vehicle immediately. Illuminates when the driver activates the tow/haul feature. E161509 If the light flashes steadily, have an authorized dealer check the system immediately, damage to the transmission could occur.
Instrument Cluster Shift to Park Warning Chime Sounds when you open the driver's door and your vehicle is not in park.
Information Displays Base Information Display Control GENERAL INFORMATION WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
Information Displays Press and release the SELECT/RESET stem, by the speedometer, to choose settings and confirm messages. Select or reset the function by holding the SELECT/RESET stem for more than two seconds. Info TRIP A or B Miles (km) to E XX.X AVG MPG (L/100km) MPG (L/km) HOLD RESET FOR SETUP MENU HOLD RESET FOR SYSTEM CHECK TRIP A or B MPG (L/km) Registers the distance of individual journeys. This displays instantaneous fuel economy as a bar graph.
Information Displays Press and hold the SELECT/RESET stem to get into the setup menu sequence for the following displays: E194389 Setup OIL LIFE UNITS ENG / METRIC Press and hold the SELECT/RESET stem English or Metric AUTOLOCK (if equipped) ON or OFF AUTOUNLOCK (if equipped) ON or OFF COMPASS ZONE (if equipped) TBC MODE (if equipped) Press and hold the SELECT/RESET stem Electric or EOH LANGUAGE = ENGLISH / SPANISH / FRENCH English / Spanish / French SYSTEM CHECK RESET FOR SYSTEM CHECK Pres
Information Displays SYSTEM CHECK TBC GAIN = XX.X or NO TRAILER (if equipped) TBC GAIN = XX.X or OUTPUT = ////// (if equipped) XXX MILES TO E AUTOUNLOCK OIL LIFE XXX% HOLD RESET = NEW This feature automatically unlocks all vehicle doors when you open the driver's door within 10 minutes of switching the ignition off. This displays the remaining oil life. An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule.
Information Displays 1. 2. 3. 4. 5. 6. Determine which magnetic zone you are in for your geographic location by referring to the zone map. Press and release the SELECT/RESET stem to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU. Press and hold the SELECT/RESET stem to get into the setup menu. Press repeatedly to scroll through the setup menu until COMPASS ZONE XX appears in the information display.
Information Displays Press the SELECT/RESET stem to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time. INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may be abbreviated or shortened depending upon which cluster type you have. Certain messages need to be confirmed before you can access the menus.
Information Displays Tire Message Action LOW TIRE PRESSURE Displays when one or more tires on your vehicle have low tire pressure. TIRE PRESSURE MONITOR FAULT Displays when the tire pressure monitoring system malfunctions. If the warning stays on or continues to come on, contact your authorized dealer. TIRE PRESSURE SENSOR FAULT Displays when a tire pressure sensor malfunctions, or your spare tire is in use.
Information Displays Trailer Message Action TRAILER BRAKE MODULE FAULT Displays along with a single tone in response to faults sensed by the TBC. See Essential Towing Checks (page 104). TRAILER CONNECTED Displays when a correct trailer connection (a trailer with electric trailer brakes) is sensed during a given ignition cycle. TRAILER DISCONNECTED Displays when a trailer connection becomes disconnected, either intentionally or unintentionally, and has been sensed during a given ignition cycle.
Climate Control MANUAL CLIMATE CONTROL E194171 A Fan speed control: Adjusts the volume of air circulated in the vehicle. B Temperature control: Controls the temperature of the air circulated in your vehicle. C NORM A/C: Adjust the control to switch the air conditioning on or off. Air conditioning cools your vehicle using outside air. To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.
Climate Control Heater Only System E194172 A Fan speed control: Adjusts the volume of air circulated in the vehicle. B Temperature control: Controls the temperature of the air circulated in your vehicle. C Air distribution control: Adjust the control to turn airflow from the windshield, instrument panel, or footwell vents on or off. You can distribute air through any combination of these vents. Note: Do not place objects under the front seats as this may interfere with the airflow to the rear seats.
Climate Control Heating the Interior Quickly • • • Vehicle Stationary for Extended Periods During Extreme High Ambient Temperatures Adjust the fan speed to the highest speed setting. Adjust the temperature control to the highest setting. Adjust the air distribution control to the footwell air vents position. • • • Recommended Settings for Heating • • • • Adjust the fan speed to the second speed setting. Adjust the temperature control to the midway point of the hot settings.
Climate Control REAR PASSENGER CLIMATE CONTROLS E194173 A Fan speed control: Adjusts the volume of air circulated in the vehicle.
Seats We recommend that you follow these guidelines: • Sit in an upright position with the base of your spine as far back as possible. • Do not recline the seatback more than 30 degrees. • Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. • Keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 10 in (25 cm) between your breastbone and the airbag cover.
Seats Moving the Seat Backward and Forward (If Equipped) E190815 The front row outboard non-adjustable head restraints consist of a trimmed foam covering over the upper structure of the seatback. Properly adjust the seatback to an upright driving or riding position, so that the head restraint is positioned as close as possible to the back of your head.
Seats Manual Lumbar • (If Equipped) • • Press A to raise or lower the front portion of the seat cushion. Press B to move the seat forward, backward, up or down. Press C to raise or lower the rear portion of the seat cushion. Recline Adjustment (If Equipped) E166702 The lumbar control is located on the inboard side of the driver seat. Turn the control to adjust your support. POWER SEATS (If Equipped) E190819 WARNING Do not adjust the driver seat or seatback while your vehicle is moving.
Auxiliary Power Points 12 Volt DC Power Point Locations WARNINGS Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the cigar lighter can cause damage not covered by the vehicle warranty, and can result in fire or serious injury. Power points may be in the following locations: • On the instrument panel. • Inside the glove box. • Behind the driver's seat, upper trim panel. Do not use a power point for operating a cigar lighter.
Auxiliary Power Points • • E194174 To gain access to the outlet contacts, press the plug against the outlet and rotate in the direction indicated on the auxiliary cover. When the indicator light on the power point is: • On: The power point is working, the ignition is on and a device is plugged in. • Off: The power point is off, the ignition is off or no device is plugged in. • Flashing: The power point is in fault mode.
Starting and Stopping the Engine GENERAL INFORMATION IGNITION SWITCH WARNINGS Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. C E B Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire.
Starting and Stopping the Engine Stopping the Engine When Your Vehicle is Moving Before starting the engine check the following: • Make sure all occupants have fastened their safety belts. • Make sure the headlamps and electrical accessories are off. • Make sure the parking brake is on. • Make sure the transmission is in park (P) or neutral (N). • Turn the ignition key to the on position.
Starting and Stopping the Engine ENGINE BLOCK HEATER (If Equipped) WARNINGS Failure to follow engine block heater instructions could result in property damage or serious personal injury. • • • Do not use your heater with ungrounded electrical systems or two-pronged adapters. There is a risk of electrical shock. Do not fully close the hood, or allow it to drop under its own weight when using the engine block heater.
Fuel and Refueling • SAFETY PRECAUTIONS WARNINGS Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel capless fuel system), do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury. • Automotive fuels can cause serious injury or death if misused or mishandled.
Fuel and Refueling The use of fuels with metallic compounds such as methylcyclopentadienyl manganese tricarbonyl (commonly known as MMT), which is a manganese-based fuel additive, will impair engine performance and affect the emission control system. FUEL QUALITY Choosing the Right Fuel Do not be concerned if the engine sometimes knocks lightly.
Fuel and Refueling Do not use any fuel other than those recommended because they could lead to engine damage that may not be covered by the vehicle Warranty. If your vehicle runs out of fuel: • Normally, adding 1.3 gal (5 L) of fuel is enough to restart the engine. If your vehicle is on a steep grade, more fuel may be required. • You may need to cycle the ignition from off to on several times after refueling to allow the fuel system to pump the fuel from the tank to the engine.
Fuel and Refueling WARNINGS Stay outside your vehicle and do not leave the fuel pump unattended when refueling your vehicle. This is against the law in some places. WARNINGS If you do not use the proper fuel filler cap, excessive pressure or vacuum in the fuel tank may damage the fuel system or cause the fuel cap to disengage in a collision, which may result in possible personal injury. Keep children away from the fuel pump; never let children pump fuel.
Fuel and Refueling Results are most accurate when the filling method is consistent. If the fuel cap light remains on, at the next opportunity, safely pull off of the road, remove the fuel filler cap, align the cap properly and reinstall it. The check fuel cap light or Check fuel cap message may not reset immediately. It may take several driving cycles for the indicators to turn off.
Fuel and Refueling Conditions • • • • • • • • Your vehicle is equipped with various emission control components and a catalytic converter that will enable your vehicle to comply with applicable exhaust emission standards. To make sure that the catalytic converter and other emission control components continue to work properly: Heavily loading a vehicle or towing a trailer may reduce fuel economy at any speed. Carrying unnecessary weight may reduce fuel economy (approximately 1 mpg [0.
Fuel and Refueling an emission control device or prevent it from working. Information about your vehicle’s emission system is on the Vehicle Emission Control Information Decal located on or near the engine. This decal also lists engine displacement present, the service engine soon indicator should stay off the next time you start the engine. A driving cycle consists of a cold engine startup followed by mixed city/highway driving. No additional vehicle service is required.
Fuel and Refueling If the vehicle’s engine or transmission has just been serviced, or the battery has recently run down or been replaced, the OBD-II system may indicate that the vehicle is not ready for I/M testing. To determine if the vehicle is ready for I/M testing, turn the ignition key to the on position for 15 seconds without cranking the engine.
Transmission Neutral (N) AUTOMATIC TRANSMISSION With the transmission in neutral (N), you can start your vehicle and it is free to roll. Hold the brake pedal down while in this position. WARNING Always set the parking brake fully and make sure the transmission is latched in park (P). Turn the ignition off and remove the key whenever you leave your vehicle. Drive (D) Drive (D) is the normal driving position for the best fuel economy.
Transmission Tow/Haul Mode Understanding the Shift Positions of a 6–Speed Automatic Transmission To activate tow/haul, press the button on the gearshift lever. E161509 The TOW HAUL indicator light illuminates in the instrument cluster. The tow/haul feature: • Delays upshifts to reduce the frequency of transmission shifting. • Provides engine braking in all forward gears, which slows your vehicle and assists you in controlling your vehicle when descending a grade.
Transmission Fourth (4) The tow/haul feature: • Delays upshifts to reduce the frequency of transmission shifting. • Provides engine braking in all forward gears, which slows your vehicle and assists you in controlling your vehicle when descending a grade. • Depending on driving conditions and load conditions, may downshift the transmission, slow your vehicle and control your vehicle speed when descending a hill, without pressing the accelerator pedal.
Transmission WARNINGS When doing this procedure, you will be taking your vehicle out of park which means your vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure. Use wheel chocks if appropriate. If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer.
Transmission If your vehicle is stuck in mud or snow, you may rock it out by shifting between forward and reverse gears, stopping between shifts in a steady pattern. Press lightly on the accelerator in each gear.
Brakes Hydraulic brake booster system (Hydroboost or Hydromax) GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and should be inspected by an authorized dealer. If the vehicle has continuous vibration or shudder in the steering wheel while braking, the vehicle should be inspected by an authorized dealer.
Brakes The anti-lock braking system will not eliminate the risks when: • You drive too closely to the vehicle in front of you. • Your vehicle is hydroplaning. • You take corners too fast. • The road surface is poor. To release the parking brake: • For vehicles equipped with a foot operated parking brake, pull the parking brake release lever. • For vehicles equipped with a hand operated parking brake, push the parking brake lever down.
Traction Control Use the switch again to return the traction control system to normal operation. PRINCIPLE OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. System Indicator Lights and Messages If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Cruise Control (If Equipped) The indicator displays in the instrument cluster. PRINCIPLE OF OPERATION E71340 Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use cruise control when your vehicle speed is greater than 20 mph (30 km/h). Setting the Cruise Speed 1. Drive to desired speed. 2. Press and release SET ACCEL. 3. Take your foot off the accelerator pedal.
Driving Aids STEERING To help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than three to five seconds when the engine is running. • Do not operate the vehicle with a low power steering pump fluid level (below the MIN mark on the reservoir). • Some noise is normal during operation. If excessive, check for low power steering pump fluid level before seeking service by your dealer.
Load Carrying the following terms for determining your vehicle’s weight ratings, with or without a trailer, from the vehicle’s Tire Label or Safety Compliance Certification Label: Base Curb Weight - is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight - is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarket equipment.
Load Carrying WARNING The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available. Overloading or improperly loading your vehicle can contribute to loss of vehicle control and vehicle rollover.
Load Carrying E142517 CARGO E143817 GAWR (Gross Axle Weight Rating) - is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position. The total load on each axle must never exceed its Gross Axle Weight Rating.
Load Carrying Note: For trailer towing information refer to the RV and Trailer Towing Guide available at an authorized dealer. GVW E143818 Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position. The Gross Vehicle Weight must never exceed the Gross Vehicle Weight Rating. GVW (Gross Vehicle Weight) is the Vehicle Curb Weight, plus cargo, plus passengers.
Load Carrying E142524 WARNING Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. GCW GVW E143819 GCWR (Gross Combined Weight Rating) - is the maximum allowable weight of the vehicle and the loaded trailer, including all cargo and passengers, that the vehicle can handle without risking damage.
Load Carrying Examples: For a 5000 pound (2268 kilogram) conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a proper tongue load range of 500 to 750 pounds (227 to 340 kilograms). For an 11500 pound (5216 kilogram) fifth wheel trailer, multiply by 0.15 and 0.25 to obtain a proper king pin load range of 1725 to 2875 pounds (782 to 1304 kilograms). for operation at Gross Vehicle Weight Rating, not at Gross Combined Weight Rating.
Load Carrying 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lb. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1,400 lb. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lb. (1400-750 (5 x 150) = 650 lb.) 5.
Load Carrying be: 635 kilograms - (2 x 99 kilograms) - (12 x 45 kilograms) = 635 - 198 - 540 = -103 kilograms. You will need to reduce the load weight by at least 240 pounds (104 kilograms). If you remove three 100-pound (45-kilogram) cement bags, then the load calculation would be:1400 - (2 x 220) - (9 x 100) = 1400 - 440 900 = 60 pounds. Now you have the load capacity to transport the cement and your friend home.
Towing Load Placement TOWING A TRAILER To help minimize how trailer movement affects your vehicle when driving: • Load the heaviest items closest to the trailer floor. • Load the heaviest items centered between the left and right side trailer tires. • Load the heaviest items above the trailer axles or just slightly forward toward the trailer tongue. Do not allow the final trailer tongue weight to go above or below 10-15% of the loaded trailer weight. • Select a tow bar with the correct rise or drop.
Towing RECOMMENDED TOWING WEIGHTS TRAILER SWAY CONTROL (If Equipped) Note: Make sure to take into consideration trailer frontal area. Vehicles equipped with the Trailer Tow Package or the Heavy Duty Payload Package should not exceed 60 ft² (5.6 m²) trailer frontal area. Note: Exceeding this limitation may significantly reduce the performance of your towing vehicle. Selecting a trailer with a low aerodynamic drag and rounded front design helps optimize performance and fuel economy.
Towing E-350 Variant Rear Axle Ratio Maximum GCWR Maximum Loaded Trailer Weight 5.4L Cutaway Single Rear Wheel 4.10 13000 lb (5896 kg) 8000 lb (3629 kg) 6.8L Cutaway Single Rear Wheel 4.10 18500 lb (8391 kg) 10000 lb (4536 kg) 5.4L Cutaway Dual Rear Wheel 4.10 13000 lb (5896 kg) 6.8L Cutaway Dual Rear Wheel 4.10 18500 lb (8391 kg) 10000 lb (4536 kg) 5.4L Stripped Chassis 138 inch wheelbase 4.10 13000 lb (5896 kg) 8400 lb (3810 kg) 6.8L Stripped Chassis 138 inch wheelbase 4.
Towing E-450 Variant Rear Axle Ratio Maximum GCWR Maximum Loaded Trailer Weight 5.4L Cutaway 4.56 14050 lb (6373 kg) 6.8L Cutaway 4.56 22000 lb (9979 kg) 10000 lb (4536 kg) 5.4L Stripped Chassis 4.56 14050 lb (6373 kg) 6.8L Stripped Chassis 4.56 22000 lb (9979 kg) 10000 lb (4536 kg) Note: Do not exceed trailer weight of 5000 lb (2268 kg) when towing with the bumper only. 9200 lb (4173 kg) This equals the maximum loaded trailer weight for this combination.
Towing • • Service your vehicle more frequently if you tow a trailer. See your scheduled maintenance information. If you use a rental trailer, follow the instructions the rental agency gives you. Color See Load limits in the Load Carrying chapter for load specification terms found on the tire label and Safety Compliance label and instructions on calculating your vehicle's load.
Towing 5. Install and adjust the tension in the weight-distributing bars so that the height of your vehicle's front wheel opening on the fender is approximately half the way down from H2, toward H1. 6. Check that the trailer is level or slightly nose down toward your vehicle. If not, adjust the ball height accordingly and repeat Steps 2-6. Electric brakes and manual, automatic or surge-type trailer brakes are safe if you install them properly and adjust them to the manufacturer's specifications.
Towing The controller shows gain setting, output bar graph, and trailer connectivity status in the information display. They appear in the information display as follows: • Trailer Brake Controller Gain (without trailer connected): Shows the current gain setting during a given ignition cycle and when adjusting the gain. This also displays if you use the manual control lever or make gain adjustments with no trailer connected.
Towing • Stop lamps: Using the manual control lever illuminates both the trailer brake lamps and your vehicle brake lamps except the center high-mount stop lamp, if you make the proper electrical connection to the trailer. Pressing your vehicle brake pedal also illuminates both trailer and vehicle brake lamps. 6. If the trailer wheels lock up, indicated by squealing tires, reduce the gain setting. If the trailer wheels turn freely, increase the gain setting.
Towing Points to Remember • Note: Do not attempt removal of the trailer brake controller without consulting the Workshop Manual. Damage to the unit may result. • • • • • • • • Adjust gain setting before using the trailer brake controller for the first time. Adjust gain setting, using the procedure above, whenever road, weather and trailer or vehicle loading conditions change from when the gain was initially set.
Towing • • • • • • • • • 1. Turn the steering wheel to point your vehicle tires away from traffic flow. 2. Set your vehicle parking brake. 3. Place the automatic transmission in position P. 4. Place wheel chocks in front and back of the trailer wheels. (Chocks not included with vehicle.) Check your hitch, electrical connections and trailer wheel lug nuts thoroughly after you have traveled 50 miles (80 kilometers).
Towing Replace the rear axle lubricant anytime the rear axle has been submerged in water. Water may have contaminated the rear axle lubricant, which is not normally checked or changed unless a leak is suspected or other axle repair is required. It is advisable to have your vehicle towed with a wheel lift and dollies or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
Towing Recreational Towing Note: Put your climate control system in recirculated air mode to prevent exhaust fumes from entering the vehicle. See Climate Control (page 63). Follow these guidelines if you have a need for recreational (RV) towing. An example of recreational towing would be towing your vehicle behind a motorhome. These guidelines are to make sure you do not damage the transmission during towing. Do not tow your vehicle with any wheels on the ground, as vehicle or transmission damage may occur.
Driving Hints 4. Check the coolant level. See Engine Coolant Check (page 138). 5. Have your vehicle checked by an authorized dealer as soon as possible. BREAKING-IN You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unusual driving characteristics. ECONOMICAL DRIVING Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early. Do not labor the engine.
Driving Hints • • • • • • • Do not warm up your vehicle on cold mornings. Reduce the use of air conditioning and heat. Avoid using speed control in hilly terrain. Do not rest your foot on the brake pedal while driving. Avoid carrying unnecessary weight (approximately 1 mpg [0.4 kilometers/liter] is lost for every 400 lbs [180 kilograms] of weight carried). Avoid adding particular accessories to your vehicle (e.g. bug deflectors, rollbars/light bars, running boards, ski racks).
Driving Hints WARNINGS Always make sure that the floor mats are properly attached to the retention posts in the carpet that are supplied with your vehicle. Floor mats must be properly secured to both retention posts to make sure mats do not shift out of position. Never place floor mats or any other covering in the vehicle foot well that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
Roadside Emergencies authorized dealer. If a member requests a tow to an authorized dealer that is more than 35 mi (56 km) from the disablement location, the member shall be responsible for any mileage costs in excess of 35 mi (56 km). ROADSIDE ASSISTANCE Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty.
Roadside Emergencies Canadian roadside coverage and benefits may differ from the U.S. coverage. If you require more information, please refer to the coverage section of your warranty guide, call us in Canada at 1-800-665-2006, or visit our website at www.ford.ca. HAZARD WARNING FLASHERS Note: The hazard warning flashers will operate when the ignition is in any position or if the key is not in the ignition. If used when the engine is not running, the battery will lose charge.
Roadside Emergencies In the event of a moderate to severe collision, this vehicle includes a fuel pump shutoff feature that stops the flow of fuel to the engine. Not every impact will cause a shutoff. WARNINGS Use only adequately sized cables with insulated clamps. Preparing Your Vehicle Should your vehicle shut off after a collision, you may restart your vehicle. For vehicles equipped with a key system: 1. Switch off the ignition. 2. Switch on the ignition. 3.
Roadside Emergencies Jump Starting Note: In the illustration, the bottom vehicle represents the booster vehicle. 1. Start the engine of the booster vehicle and rev the engine moderately, or press the accelerator gently to keep your engine speed between 2000 and 3000 RPM, as shown in your tachometer. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both vehicle engines for an additional three minutes before disconnecting the jumper cables.
Roadside Emergencies 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle battery. 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle battery. 5. Allow the engine to idle for at least one minute.
Customer Assistance These are some of the items that can be found online: • U.S. dealer locator by Dealer Name, City/State or Zip Code. • Owner Manuals. • Maintenance Schedules. • Recalls. • Ford Extended Service Plans. • Ford Genuine Accessories. • Service specials and promotions. GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer.
Customer Assistance In order to help us serve you better, please have the following information available when contacting a Customer Relationship Center: • Vehicle Identification Number. • Your telephone number (home and business). • The name of the authorized dealer and city where located. • The vehicle’s current odometer reading. California Civil Code Section 1793.
Customer Assistance already taken to try to resolve them. A Customer Claim Form will be mailed that will need to be completed, signed and returned to the BBB along with proof of ownership. Upon receipt, the BBB will review the claim for eligibility under the Program Summary Guidelines. THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Your satisfaction is important to Ford Motor Company and to your dealer.
Customer Assistance In the CAMVAP program, impartial third-party arbitrators conduct hearings at mutually convenient times and places in an informal environment. These impartial arbitrators review the positions of the parties, make decisions and, when appropriate, render awards to resolve disputes. CAMVAP decisions are fast, fair, and final as the arbitrator’s award is binding on both you and Ford of Canada.
Customer Assistance FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 U.S.A. Or to order a free publication catalog, call toll free: 1-800-782-4356 Ford: 80004443673 Lincoln: 80004441067 If calling from the UAE: 80004441066 If calling from the Kingdom of Saudi Arabia: 8008443673 If calling from Kuwait: 22280384 www.helminc.com Monday-Friday 8:00 a.m. - 6:00 p.m.
Customer Assistance If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.
Fuses Note: If your vehicle is equipped with dual batteries, disconnecting the primary under-hood battery does not remove power from all circuits. FUSE SPECIFICATION CHART Power Distribution Box WARNINGS Always disconnect the battery before servicing high current fuses. The power distribution box is located in the engine compartment. It has high-current fuses that protect your vehicle's main electrical systems from overloads.
Fuses Fuse or relay number Fuse amp rating Protected components 8 — Auxiliary switch #3 relay. 9 — Modified vehicle and stripped chassis run/ start relay. 10 — Not used. Not used. 11 — 12 40A** Modified vehicle and stripped chassis run/ start. 13 30A** Starter solenoid relay. 14 40A** Run/start relay. 15 40A** Modified vehicle and stripped chassis battery. 16 50A** Auxiliary air conditioning blower. 17 50A** Trailer tow battery charge. Trailer tow park feed.
Fuses Fuse or relay number Fuse amp rating Protected components 32 50A** Blower motor. 33 40A** Anti-lock brake system pump. 34 20A** Stripped chassis horn. 35 40A** Powertrain control module relay. 36 20A** Ignition switch (stripped chassis). 37 — Trailer tow left-hand side stop lamp and direction indicator lamp relay. 38 — Trailer tow right-hand side stop lamp and direction indicator lamp relay. 39 — Back-up lamp relay. 40 — Blower motor relay. Not used.
Fuses Fuse or relay number Fuse amp rating 55 — Not used. 56 — Not used. 57 20A* Trailer tow park lamp. 58 15A* Trailer tow back-up lamp. 59 — Not used. 60 — One-touch integrated start diode. 61 — Not used. 62 — 63 30A** 64 — 65 20A** Protected components Auxiliary switch #2 relay. Trailer tow battery charge. Not used. Power point 2 (glove box). 66 20A** Power point 3 (cutaway B+). 67 20A** Power point 1 (instrument panel). 68 50A** Modified vehicle.
Fuses Fuse or relay number Fuse amp rating Protected components Engine ignition coil relay coil. 79 10A* Vehicle power 5. Transmission. 80 10A* Cluster run/start (stripped chassis). 81 — Not used. 82 — Not used. 83 — Fuel pump diode. 84 — Not used. 85 — Auxiliary switch #1 relay. *Mini fuses. **A1S fuses. Note: If your vehicle is equipped with dual batteries, disconnecting the primary under-hood battery does not remove power from all circuits.
Fuses E194306 Fuse or relay number Fuse amp rating Protected components 1 30A Inverter B+. 2 15A Not used (spare). 3 15A Not used (spare). 4 30A Not used (spare). 5 10A Passenger compartment fuse panel. Brake-shift interlock. 6 20A Direction indicators lamps. Hazard lamps. Stop lamps. 7 10A Left-side headlamp low beam. 8 10A Right-side headlamp low beam. 9 15A Courtesy lamps. 10 15A Switch illumination.
Fuses Fuse or relay number Fuse amp rating Protected components 11 10A Not used (spare). 12 7.5A Not used (spare). 13 5A Mirrors. 14 10A SYNC. Global positioning system module. 15 10A Not used (spare). 16 15A Not used (spare). 17 20A Door locks. 18 20A Not used (spare). 19 25A Not used (spare). 20 15A Diagnostic connector (except stripped chassis). 21 15A Not used (spare). 22 15A Parking lamps. License plate lamps. 23 15A Headlamp high beams.
Fuses Fuse or relay number Fuse amp rating Protected components 36 5A Passive anti-theft system radio frequency module. 37 10A Climate control. Stripped chassis #1 run/start. 38 20A Not used (spare). 39 20A Radio. 40 20A Not used (spare). 41 15A Radio. Switch illumination. Automatic dimming rear view mirror. Power inverter. 42 10A Auxiliary switch. 43 10A Stripped chassis instrument panel connector #1. 44 10A Trailer tow battery charge relay. 45 5A Wipers.
Maintenance Working with the Engine Off GENERAL INFORMATION 1. Set the parking brake and shift to park (P). 2. Switch off the engine. 3. Block the wheels. Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly.
Maintenance UNDER HOOD OVERVIEW B A E197500 C D E I F G H A Windshield washer fluid reservoir: See Washer Fluid Check (page 144). B Engine oil filler cap: See Engine Oil Check (page 137). C Automatic transmission fluid dipstick: See Automatic Transmission Fluid Check (page 140). D Air filter assembly: See Changing the Engine Air Filter (page 154). E Engine oil dipstick: See Engine Oil Dipstick (page 137). F Brake fluid reservoir: See Brake Fluid Check (page 143).
Maintenance ENGINE OIL DIPSTICK A B E142732 Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. E161560 A MIN B MAX ENGINE OIL CHECK Note: Check the level before starting the engine. 1.
Maintenance 3. Keep the accelerator and brake pedals fully pressed. 4. After three seconds, a message displays confirming the reset procedure is in progress. 5. After 25 seconds, a message displays confirming the reset procedure is complete. 6. Release the accelerator and brake pedals. 7. Switch the ignition off. Note: Make sure that the coolant level is between the MIN and MAX marks on the coolant reservoir. Note: Coolant expands when it is hot. The level may extend beyond the MAX mark.
Maintenance 1. Must drain the cooling system. 2. Chemically clean the coolant system with Motorcraft Premium Cooling System Flush. 3. Refill with engine coolant as soon as possible. Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recycling and disposing of automotive fluids. Water alone, without engine coolant, can cause engine damage from corrosion, overheating or freezing.
Maintenance How Fail-Safe Cooling Works WARNINGS maintain high-speed operation and may completely shut down without warning. Potentially losing power steering assist, and power brake assist, which may increase the possibility of a crash resulting in serious injury. If the engine begins to overheat, the engine coolant temperature gauge moves to the red (hot) area and: A high engine temperature message appears in the information display.
Maintenance Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components. 6. Install the dipstick making sure it is fully seated in the filler tube. 7. Remove the dipstick and inspect the fluid level. The fluid should be in the designated area for normal operating temperature or ambient temperature.
Maintenance E163741 E163743 Type B Type B E163742 E163744 For vehicles equipped with 5-speed transmissions, check the fluid at the normal operating temperature of 151°F (66°C) to 170°F (77°C) on a level surface. For vehicles equipped with 6-speed transmissions, check the fluid at the normal operating temperature of 196°F (91°C) to 215°F (102°C) on a level surface. The normal operating temperature can be reached after approximately 19 mi (30 km).
Maintenance Automatic Transmission Fluid Filter If necessary, add fluid in 8 (250 ml) increments through the filler tube until the level is correct. Type A E196355 Your automatic transmission is equipped with a serviceable transmission fluid filter located inside the transmission bottom pan. For service intervals for the automatic transmission fluid and transmission filter, See Scheduled Maintenance (page 266). E163745 Type B For transmission filter maintenance, see your authorized dealer.
Maintenance Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See Capacities and Specifications (page 190). WARNINGS For E-350 and E-450 vehicles with the Hydro-Boost Brake System, do not press the brake pedal after the engine has been turned off. Pressing the brake pedal after the engine has been turned off will give a false power steering fluid level reading.
Maintenance WARNINGS When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle or battery. Lift the battery with a battery carrier or with your hands on opposite corners. Always dispose of automotive batteries in a responsible manner. Follow your local authorized standards for disposal. Call your local authorized recycling center to find out more about recycling automotive batteries.
Maintenance When the battery is disconnected or a new battery installed, the transmission must learn its adaptive strategy. As a result of this, the transmission may shift firmly. This operation is considered normal and fully updates transmission operation to its optimum shift feel. We recommend that the negative battery cable terminal be disconnected from the battery if you plan to store your vehicle for an extended period of time. This minimizes the discharge of your battery during storage.
Maintenance • • Replace wiper blades at least once per year for optimum performance. You can improve poor wiper quality by cleaning the wiper blades and the windshield. E Vertical reference line for the center of the headlamp. F Vertical reference line for the center of the vehicle. To adjust the headlamps: ADJUSTING THE HEADLAMPS 1. Park your vehicle on a level surface about 25 feet (7.6 meters) away from a vertical plain surface.
Maintenance E196380 E142592 5. Locate the vertical adjuster (A) for each headlamp. Turn the adjuster control either clockwise or counterclockwise to adjust the vertical aim of the headlamp. 6. In addition to the horizontal line marked in step 2, a pair of vertical lines (E) must be marked at the center line of the headlamps on the wall or screen. 7. On the wall or screen, locate the high intensity area of the beam pattern.
Maintenance REMOVING A HEADLAMP Aerodynamic Headlamps 1. Make sure the headlamp switch is in the off position, then open the hood. E142465 4. On the wall or screen, you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, you will need to adjust the headlamp. E196385 2.
Maintenance Replacing Headlamp Bulbs (Aerodynamic) 2. Remove the four screws from the headlamp assembly and carefully remove the lamp/bezel. 3. Remove the four screws and the retaining ring. 4. Disconnect the electrical connector from the lamp and remove the lamp. WARNING Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb by only its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
Maintenance Replacing Front Parking Lamp and Direction Indicator Bulbs Replacing Side Marker Bulbs Aerodynamic Aerodynamic E196390 E196388 Sealed beam Sealed beam E196391 E196389 1. Make sure the headlamp switch is in the off position, then open the hood. 2. Remove the headlamp assembly. Refer to Replacing Headlamp Bulbs in this section. 3. Rotate the bulb socket counterclockwise and remove. 4. Carefully pry up the bulb straight out of the socket. 1.
Maintenance 3. Carefully pull the bulb straight out of the socket and push in the new bulb. BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb illumination time. E163828 2.
Maintenance Interior Lamps Lamp Trade name Underhood Lamp. 906 Map lamp. 578 Dome lamp. 578 Cargo lamp. 578 To replace all instrument panel lights - see your authorized dealer.
Maintenance CHANGING THE ENGINE AIR FILTER WARNING To reduce the risk of vehicle damage or personal injury, do not start the engine with the air filter removed and do not remove it while the engine is running. E197064 Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. 3. Carefully separate the two halves of the air filter housing. 4.
Vehicle Care GENERAL INFORMATION CLEANING THE EXTERIOR Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. Wash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, we recommend Motorcraft Detail Wash.
Vehicle Care Note: Never use abrasive materials, for example steel wool or plastic pads as they can scratch the chrome surface. • Note: Do not use chrome cleaner, metal cleaner or polish on wheels or wheel covers. Exterior Plastic Parts For routine cleaning we recommend Motorcraft Detail Wash. If tar or grease spots are present, we recommend Motorcraft Bug and Tar Remover.
Vehicle Care • • Never wash or rinse any ignition coil, spark plug wire or spark plug well, or the area in and around these locations. Cover the battery, power distribution box, and air filter assembly to prevent water damage when cleaning the engine. CLEANING THE INTERIOR WARNINGS Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents.
Vehicle Care 1. CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS 2. WARNING Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. 3. Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces. See Cleaning Leather Seats (page 158). 4.
Vehicle Care You should: • Remove dust and loose dirt with a vacuum cleaner. • Clean and treat spills and stains as soon as possible. Note: Industrial-strength or heavy-duty cleaners in combination with brush agitation to remove brake dust and dirt, could wear away the clear coat finish over a period time. Note: Do not use hydrofluoric acid-based or high caustic-based wheel cleaners, steel wool, fuels or strong household detergents.
Vehicle Care General • • • • Store all vehicles in a dry, ventilated place. Protect from sunlight, if possible. If vehicles are stored outside, they require regular maintenance to protect against rust and damage. • Fuel system • Body • • • • • • • Wash your vehicle thoroughly to remove dirt, grease, oil, tar or mud from exterior surfaces, rear-wheel housing and the underside of front fenders. Periodically wash your vehicle if it is stored in exposed locations.
Vehicle Care Miscellaneous • • Make sure all linkages, cables, levers and pins under your vehicle are covered with grease to prevent rust. Move vehicles at least 25 ft (7.5 m) every 15 days to lubricate working parts and prevent corrosion. Removing Vehicle From Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration.
Wheels and Tires How Your Vehicle Differs from Other Vehicles GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners Sport-utility vehicles, vans and trucks can differ from some other vehicles in a few noticeable ways. Your vehicle may be: WARNINGS Utility vehicles have a significantly higher rollover rate than other types of vehicles.
Wheels and Tires Tire Quality Grades apply to new pneumatic passenger car tires. The Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A. These Tire Quality Grades are determined by standards that the United States Department of Transportation has set. Tire Quality Grades apply to new pneumatic passenger car tires.
Wheels and Tires Temperature A B C ½) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate. WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded.
Wheels and Tires *Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), or Tire Label located on the B-pillar or the edge of the driver's door. B-pillar: The structural member at the side of the vehicle behind the front door. *Bead area of the tire: Area of the tire next to the rim.
Wheels and Tires A. P: Indicates a tire, designated by the Tire and Rim Association, that may be used for service on cars, sport utility vehicles, minivans and light trucks. Note: If your tire size does not begin with a letter this may mean it is designated by either the European Tire and Rim Technical Organization or the Japan Tire Manufacturing Association. B. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge.
Wheels and Tires G. H: Indicates the tire's speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods of time under a standard condition of load and inflation pressure. The tires on your vehicle may operate at different conditions for load and inflation pressure. These speed ratings may need to be adjusted for the difference in conditions. The ratings range from 81 mph (130 km/h) to 186 mph (299 km/h). These ratings are listed in the following chart.
Wheels and Tires *Temperature: The temperature grades are A (the highest), B and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. M. Maximum Inflation Pressure: Indicates the tire manufacturers' maximum permissible pressure or the pressure at which the maximum load can be carried by the tire.
Wheels and Tires B D. Maximum Load Single lb (kg) at psi (kPa) cold: Indicates the maximum load and tire pressure when the tire is used as a single; defined as two tires (total) on the rear axle. C A Information on T Type Tires D E142544 T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example. Tire Quality Grades do not apply to this type of tire. B LT type tires have some additional information beyond those of P type tires.
Wheels and Tires A. T: Indicates a type of tire, designated by the Tire and Rim Association, that is intended for temporary service on cars, sport utility vehicles, minivans and light trucks. B. 145: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge. In general, the larger the number, the wider the tire. C. 80: Indicates the aspect ratio which gives the tire's ratio of height to width. Numbers of 70 or lower indicate a short sidewall. D.
Wheels and Tires Note: Do not reduce tire pressure to change the ride characteristics of the vehicle. If you do not maintain the inflation pressure at the levels specified by Ford, your vehicle may experience a condition known as shimmy. Shimmy is a severe vibration and oscillation in the steering wheel after the vehicle travels over a bump or dip in the road that does not dampen out by itself.
Wheels and Tires the B-pillar or the edge of the driver's door. The cold inflation pressure should never be set lower than the recommended pressure on the Safety Compliance Certification Label or Tire Label. When weather temperature changes occur, tire inflation pressures also change. A 10°F (6°C) temperature drop can cause a corresponding drop of 1 psi (7 kPa) in inflation pressure.
Wheels and Tires 6. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. 7. Check the sidewalls to make sure there are no gouges, cuts or bulges. All tires with Steel Carcass Plies (if equipped): This type of tire utilizes steel cords in the sidewalls. As such, they cannot be treated like normal light truck tires.
Wheels and Tires E161437 174 E-Series (TE4), enUSA, First Printing
Wheels and Tires 1 E161438 wear. If internal damage to the tire is suspected, have the tire demounted and inspected in case it needs to be repaired or replaced. For your safety, tires that are damaged or show signs of excessive wear should not be used because they are more likely to blow out or fail. Improper or inadequate vehicle maintenance can cause tires to wear abnormally.
Wheels and Tires Tire Wear or suspected have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended. Age WARNING Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed, inflation pressure) the tires experience throughout their lives.
Wheels and Tires describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall. This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
Wheels and Tires The two front tires or two rear tires should generally be replaced as a pair. The tire pressure sensors mounted in the wheels are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system. If the tire pressure monitoring system indicator is flashing, the system is malfunctioning.
Wheels and Tires Safety Practices If you feel a sudden vibration or ride disturbance while driving, or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road. Stop and inspect the tires for damage. If a tire is under-inflated or damaged, deflate it, remove wheel and replace it with your spare tire and wheel.
Wheels and Tires Tire Rotation Rotating your tires at the recommended interval (as indicated in the Scheduled Maintenance chapter) will help your tires wear more evenly, providing better tire performance and longer tire life. Sometime irregular tire wear can be corrected by rotating the tires. WARNING If the tire label shows different tire pressures for the front and rear tires and the vehicle is equipped with a tire pressure monitoring system, then the settings for the system sensors need to be updated.
Wheels and Tires USING SNOW CHAINS WARNING Snow tires must be the same size, load index, and speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury, and death. Additionally, the use of non-recommended tires and wheels could cause steering, suspension, axle, transfer case, or power transfer unit failure.
Wheels and Tires • • • Install chains securely, verifying that the chains do not touch any wiring, brake lines or fuel lines. Drive cautiously. If you hear the chains rub or bang against your vehicle, stop and retighten the chains. If this does not work, remove the chains to prevent damage to your vehicle. Remove the tire chains when they are no longer needed. Do not use tire chains on dry roads.
Wheels and Tires Understanding Your Tire Pressure Monitoring System The tire pressure monitoring system complies with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Wheels and Tires Low tire pressure warning light Possible cause Customer action required Solid warning light Tire(s) under-inflated Make sure tires are at the proper pressure. See Inflating your tires in this chapter. After inflating your tires to the manufacturer’s recommended pressure as shown on the Tire Label (located on the edge of driver’s door or the B-Pillar), the vehicle must be driven for at least two minutes over 20 mph (32 km/h) before the light turns off.
Wheels and Tires How Temperature Affects Your Tire Pressure WARNINGS To determine the required pressure(s) for your vehicle, see the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label located on the B-Pillar or the edge of the driver’s door. See Load Carrying (page 93). The tire pressure monitoring system monitors tire pressure in each pneumatic tire.
Wheels and Tires Dissimilar Spare Wheel and Tire Assembly Information • • WARNING Use of one of the dissimilar spare tires listed above at any one wheel location can lead to impairment of the following: • Handling, stability and braking performance. • Comfort and noise. • Ground clearance and parking at curbs. • Winter weather driving capability. • Wet weather driving capability. • All-wheel driving capability.
Wheels and Tires When driving with the full-size dissimilar spare wheel and tire assembly additional caution should be given to: • Towing a trailer. • Driving vehicles equipped with a camper body. • Driving vehicles with a load on the cargo rack. Note: Passengers should not remain in your vehicle when the vehicle is being jacked. Removing the flat wheel and tire 1. Park on a level surface, set the parking brake and activate the hazard flashers. 2.
Wheels and Tires Jacking location Rear axle jacking points: E-350 and E-450 dual rear wheel. Installing the spare wheel and tire 1. Refer to the diagrams above to locate the correct jacking point for your vehicle. 2. Raise the vehicle by using the jack handle to turn the jack nut clockwise. Once the flat tire is raised above the ground, remove the lug nuts with the lug wrench. 3. Replace the flat tire with the spare tire, making sure the valve stem is facing outward.
Wheels and Tires TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel.
Capacities and Specifications ENGINE SPECIFICATIONS - 5.4L V8 Engine 5.4L V8 Cubic inches 330 Required fuel Minimum 87 octane or E85 Firing order 1-3-7-2-6-5-4-8 Ignition system Coil on plug Spark plug gap 0.051 — 0.057 in. (1.29 — 1.45 mm) Compression ratio 9.0:1 5.4L V8 Engine without A/C Drivebelt Routing 5.4L V8 Engine with A/C E161789 E161788 ENGINE SPECIFICATIONS - 6.8L Engine 6.
Capacities and Specifications Engine 6.8L V10 (With CNG Prep Package) Compression ratio 9.0:1 6.8L V10 Engine without A/C Drivebelt Routing 6.8L V10 Engine with A/C E161789 E161788 MOTORCRAFT PARTS - 5.
Capacities and Specifications Component Part Number Torqshift automatic transmission FT-180 internal bottom-pan filter Windshield wiper blade WW-2005 We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company’s specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability.
Capacities and Specifications MOTORCRAFT PARTS - 6.8L Component Part Number Air filter element FA-1632 Oil filter FL-820-S Battery BXT-65-650 BXT-65-750 Battery (auxiliary) BXT-65-750 Spark plugs SP-521 Torqshift automatic transmission FT-180 internal bottom-pan filter Windshield wiper blade WW-2005 We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance.
Capacities and Specifications VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the left-hand side of the instrument panel. C Make, vehicle line, series, body type D Engine type E Check digit F Model year G Assembly plant H Production sequence number VEHICLE CERTIFICATION LABEL E142476 Please note that in the graphic, XXXX is representative of your vehicle identification number.
Capacities and Specifications The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.
Capacities and Specifications CAPACITIES AND SPECIFICATIONS - 5.4L V8 WARNING The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury. Have the air conditioning refrigerant system serviced only by qualified personnel. Item Capacity Engine oil 6.0 qt (5.7 L) Engine coolant 28.7 qt (27.2 L) Engine coolant - with auxiliary rear heat 30.7 qt (29.
Capacities and Specifications Item 1 Capacity A/C refrigerant compressor oil 8.0 fl oz (237 ml) A/C refrigerant compressor oil (Prep package) 16.0 fl oz (473 ml) Approximate dry fill capacity. Actual amount may vary during fluid changes. 2 Fill Dana rear axles to 1/4 inch — 9/16 inch (6 mm — 14 mm) below the bottom of the fill hole. Specifications Materials Name Specification Recommended motor oil (U.S.
Capacities and Specifications Name Specification PM-20 Power steering fluid and Automatic transmission fluid (U.S. and Mexico): Motorcraft MERCON LV Automatic Transmission Fluid XT-10-QLVC WSS-M2C938-A MERCON LV Power steering fluid and Automatic transmission fluid (Canada): Motorcraft MERCON LV Automatic Transmission Fluid CXT-10-LV12 WSS-M2C938-A MERCON LV Dana Limited Slip axle fluid (U.S.
Capacities and Specifications Name Specification A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D WSH-M1C231-B Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5 ESB-M1C93-B Lock cylinders (U.S.
Capacities and Specifications Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
Capacities and Specifications Item Capacity M70HD (M273HD) E-450 Windshield washer fluid Fill as required Fuel tank 40 gal (151 L) Fuel tank (Optional or E-Super Duty) 55 gal (208 L) A/C refrigerant 1 1.9 lb (0.85 kg) A/C refrigerant compressor oil 8.0 fl oz (237 ml) A/C refrigerant compressor oil (Prep package) 16.0 fl oz (473 ml) Approximate dry fill capacity. Actual amount may vary during fluid changes.
Capacities and Specifications Name Specification Engine coolant (U.S. and Mexico): Motorcraft Gold Antifreeze/Coolant Prediluted VC-7DIL-B WSS-M97B51-A1 Engine coolant (Canada): Motorcraft Gold Antifreeze/Coolant Prediluted CVC-7DIL-B2 WSS-M97B51-A1 Brake fluid: WSS-M6C65-A2 Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20 Power steering fluid and Automatic transmission fluid (U.S.
Capacities and Specifications Name Specification Motorcraft R-134a Refrigerant YN-19 A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R WSH-M17B19-A A/C refrigerant (Mexico): Motorcraft R-134a Refrigerant MYN-19 WSH-M17B19-A A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D WSH-M1C231-B Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5 ESB-M1C93-B Lock cylinders (U.S.
Capacities and Specifications E142732 An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Council (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty. Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2.
Audio System AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: • AM: 530, 540-1700, 1710 kHz • FM: 87.9-107.7, 107.9 MHz GENERAL INFORMATION Radio Frequencies and Reception Factors Radio Reception Factors Distance and strength The further you travel from an AM or FM station, the weaker the signal and the weaker the reception.
Audio System • • MP3 folder mode represents a folder structure consisting of one level of folders. The CD player numbers all MP3 tracks on the disc (noted by the .mp3 file extension) and all folders containing MP3 files, from F001 (folder) T001 (track) to F253 T255. Creating discs with only one level of folders helps with navigation through the disc files. In track mode, the system displays and plays the structure as if it were only one level deep (all .
Audio System A CLK: Press this button to switch the display between the clock and radio frequency. To set the time, press and hold the button until the hours start to flash. Press the arrow buttons (B) to adjust the hours, then repeat to set the minutes. Press CLK again to exit clock mode. B Tune: Press these arrow buttons to manually search through the radio frequency band. Press and hold for a fast search. In AUDIO mode, press the buttons to adjust different sound settings.
Audio System E194379 A Eject: Press this button to eject a CD. B CD slot: Insert a CD. C Tune: Press this button to manually search through the radio frequency band. Press and hold for a fast search. D Phone: Press this button to access the phone features of the SYNC® system. See SYNC™ (page 216). E MENU: Press this button to access different audio system features. If your vehicle is equipped with satellite radio, you can access different menus by pressing OK.
Audio System COMPRESS (Compression) is only available in CD and MP3 modes. Switching compression on brings the soft and loud passages together for a more consistent listening level. Use the SEEK buttons and up and down arrow buttons to switch this mode on and off. F AUX: Press to access the media features of the SYNC system. See the SYNC chapter for more information. G Seek: In radio mode, press and release the seek arrows to go to the next (or previous) preset radio station or disc track.
Audio System The multicast indicator appears in FM mode (only) if the current station is broadcasting multiple digital broadcasts. The highlighted numbers signify available digital channels where new or different content is available. HD1 signifies the main programming status and is available in analog and digital broadcasts. Other multicast stations (HD2 through HD7) are only available digitally. DIGITAL RADIO Note: HD Radio broadcasts are not available in all markets.
Audio System HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again.
Audio System Potential station issues Issues Echo, stutter, skip or repeat in audio. Increase or decrease in audio volume. Cause Action This is poor time alignment No action required. This is a by the radio broadcaster. broadcast issue. Sound fading or blending in The radio is shifting between No action required. The and out. analog and digital audio. reception issue may clear up as you continue to drive. * There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct Tune.
Audio System Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License. Satellite Radio Reception Factors Potential satellite radio reception issues Antenna obstructions For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible.
Audio System Troubleshooting Message Condition Action Acquiring… Radio requires more than two seconds to produce audio for the selected channel. Satellite antenna fault There is an internal module If this message does not clear shortly, or with an ignior system failure present. tion key cycle, your receiver may have a fault. See an authorized dealer for service. SIRIUS system failure No action required. This message should disappear shortly. Invalid Channel The channel is no longer available.
Audio System USB PORT (If Equipped) WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
SYNC™ GENERAL INFORMATION E198355 • SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions * & Information). • Use applications, such as Pandora and ** Stitcher, via SYNC AppLink. • Access phonebook contacts and music using voice commands.
SYNC™ In the United States, call 1-800-392-3673. When using SYNC: • Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities. • Do not leave playing devices in your vehicle during extreme conditions as it could cause them damage. See your device's manual for further information. • Do not attempt to service or repair the system.
SYNC™ System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada.
SYNC™ Voice command If you want the system to carry out the following Voice Settings | Voice Preferences Adjust the level of voice interaction and feedback. Help Hear a list of voice commands available in the current mode. You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where (cancel | stop | exit) appears you say; cancel or stop or exit. You must say any of the voice commands that appear outside of open and close brackets.
SYNC™ Confirmation prompts are short questions the system asks when it is not sure of your request or when there are multiple possible responses to your request. For example, the system may ask "Phone, is that Voice command correct?". If turned off, the system simply makes a best guess as to what you requested and may ask you to confirm settings.
SYNC™ Other features, such as text messaging using Bluetooth and automatic phonebook download, are cell phone-dependent features. To check your cell phone's compatibility, see your cell phone's manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. USING SYNC™ WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cell phone's functionality.
SYNC™ Pairing Subsequent Cell Phones Depending on your cell phone's capability and your market, the system may prompt you with questions, such as setting the current cell phone as the primary cell phone (the cell phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook. Note: To scroll through the menus, press the up and down arrows on your audio system. Note: Make sure to switch on the ignition and the radio.
SYNC™ Voice Command You can also say any of the following: [Phone] Settings [Message] Notification On Voice Command Call ___ Call ___ at Home [Phone] Settings [Message] Notification Off Call ___ at Work [Phone] Settings [Set] Phone Ringer Call ___ in Office [Phone] Settings [Set] Ringer 1 Call ___ on Mobile [Phone] Settings [Set] Ringer 2 Call ___ on Other [Phone] Settings [Set] Ringer 3 Dial [Phone] Settings [Set] Ringer Off Battery None of these commands are available until your cell phone
SYNC™ Making a Call Press the voice button and when prompted say: Voice Command Action and Description Call ___ This command is not available until your cell phone information is completely downloaded using Bluetooth. Dial Use to enter a phone number digit by digit. When the system confirms the number say one of the following commands: Dial To confirm the number and initiate the call. delete To erase the last spoken digit. You can also press the left arrow button.
SYNC™ Message Action and Description 1. Press the phone button. 2. Access the desired contact through SYNC or use voice commands to place the second call. Once actively in the second call, press MENU. 3. Scroll to Join Calls, and press the OK button. Wait until the following message appears. Join calls Press the OK button. Enter Tones Enter tones such as numbers for passwords. Scroll until the desired number appears in the display, then press OK; a tone sounds as confirmation. Repeat as necessary.
SYNC™ Press the phone button to enter the Phone Menu, then scroll to: Message Action and Description Phone Redial Press the OK button to redial the last number called. Press the OK button again to confirm. Call History Access any previously dialed, received or missed calls after you 1 connect your Bluetooth-enabled cell phone to SYNC. Press the OK button then select one of the following and press the OK button again to confirm.
SYNC™ Message Action and Description Vehicle Health Create and receive a diagnostic report card on your vehicle. Mobile Apps Interact with SYNC-capable mobile applications on your 3 3 smartphone. Sys Settings Access Bluetooth Devices menu listings and advanced menu listings. Exit Press the OK button to to exit the phone menu. 1 This is a cell phone-dependent feature. 2 This is a cell phone-dependent and speed-dependent feature.
SYNC™ To open the test message, press OK to receive and open the text message. Press OK again and SYNC reads your message aloud as you are not able to view the message. You can then also choose whether you’d like to reply or forward the message. Reply or forward the message, press OK and scroll to choose between: Message Action and Description Reply to sender Press the OK button to access and then scroll through the list of pre-defined messages to send. Forward msg.
SYNC™ Message Action and Description Download now Allows you to download your unread messages to SYNC. To download the messages, press the OK button to select. The display indicates the system is downloading your messages. When downloading is complete, SYNC returns you to the inbox. Delete All Messages? Allows you to delete current text messages from SYNC. To delete the messages, press the OK button to select. The display indicates when it is finished deleting all your text messages.
SYNC™ Message Action and Description Press the OK button then select one of the following and press the OK button again to confirm. Message Notification On Message Notification Off Modify Phonebook Modify the contents of your phone book (such as add, delete, download). Press OK to select and scroll between: Add contacts Press the OK button to add more contacts from your phonebook. Push the desired contact(s) on your cell phone. See your cell phone's manual on how to push contacts.
SYNC™ Press the Phone button to enter the Phone Menu, then scroll to: Message Action and Description Sys Settings Press the OK button. Bluetooth device Press the OK button. Select one of the following: Add See Using SYNC™ With Your Phone (page 221). Connect BT Connect a previously paired Bluetooth-enabled phone. Press OK to select and view a list of previously paired phones. Scroll until the desired device is chosen, then press OK to connect the phone.
SYNC™ Advanced and set prompts, languages, defaults, perform a master reset, install an application and view system information. The Advanced menu allows you to access To access the advanced menu, press the phone button to enter the Phone Menu, the scroll to: Message Action and Description Sys Settings Press OK. Advanced Press OK. Select one of the following: Confirmation Prompts Get help from SYNC by using questions, helpful hints or asking you for a specific action.
SYNC™ Message Action and Description Press the OK button and scroll to select. Press the OK button to confirm. System info Access the Auto Version number as well as the FDN number. Press the OK button to select. Return Exit the current menu. WARNINGS SYNC™ APPLICATIONS AND SERVICES (If Equipped) Do not wait for 911 Assist to make an emergency call if you can do it yourself.
SYNC™ If a crash deploys an airbag (excluding knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC-equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone. You can learn more about the 911 Assist feature, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. See Supplementary Restraints System (page 27).
SYNC™ In the Event of a Crash 911 Assist Privacy Notice Not all crashes will deploy an airbag or activate the fuel pump shut-off (the triggers for 911 Assist). If a connected cell phone sustains damage or loses its connection to SYNC during a crash, SYNC will search for and try to connect to a previously paired cell phone; SYNC will then attempt to call the emergency services.
SYNC™ Note: This feature may not function properly if you have enabled caller ID blocking on your cellular phone. Before running a report, review the Vehicle Health Report Privacy Notice. The system allows you to check your vehicle's overall health in the form of a diagnostic report card.
SYNC™ Message * Action and Description Run Report Press the OK button for SYNC to run a health report of your vehicle's diagnostic systems and send the results to Ford where it combines with scheduled maintenance information, open recalls, other field service actions and vehicle inspection items that still need servicing by an authorized dealer. Return Exit the current menu. You must first turn this feature on before you can select the desired mileage interval.
SYNC™ Note: When you connect, the service uses GPS technology and advanced vehicle sensors to collect your vehicle's current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request. Further, to provide the services you request, for continuous improvement, the service may collect and record call details and voice communications. For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com.
SYNC™ Connecting to SYNC Services Using the Phone Menu Press the phone button, then scroll to: Message Action and Description SYNC Apps Press the OK button. Services 1. Press the OK button. The display indicates the system is connecting. 2. Press the OK button again. SYNC initiates the call to the Services portal. 3. Once you connect to the service, follow the prompts to request the desired service, for example traffic or directions.
SYNC™ Voice command Action and Description The live operator can assist you by searching for businesses by name or by category, residential addresses by street address or by name or specific street intersections. The system may prompt you to speak with an operator when it has difficulty matching your voice request. Operator Assist is a feature of your SYNC Services subscription. For more information on Operator Assist, visit www.SYNCMyRide.com/ support.
SYNC™ SYNC Services quick tips You can even access your account outside your vehicle. Just use the number on your phone's call history. Traffic and Directions features do not function properly but information services and the 411 connect and text message features are available. Menu item SYNC™ APPLINK™ Scroll through the list of available applications and press OK to select a particular app.
SYNC™ Press the Menu button to the SYNC menu and scroll to: Menu item Action and description SYNC-Media Press the OK button. Mobile Apps Press the OK button and scroll through the list of available applications and select your desired app. Scroll until the app name followed by "Menu", is displayed (such as, Pandora Menu), then press OK. From here, you can access an application's features, such as Thumbs up and Thumbs down. For more information, please visit: Website www.SYNCMyRide.
SYNC™ E142599 Press the voice button and when prompted say: Voice command USB [1] Action and Description You can now play music by saying any of the appropriate voice commands. See Media voice commands. You do not need to say words that appear within square brackets. For example, for where USB[1]appears, you can say USB or USB one. Press the AUX button, then the Menu button to enter the Media Menu. To Connect Using the System Menu Plug the device into the USB port. See USB Port (page 215).
SYNC™ What's Playing? When a track is playing, you can ask the system to tell you what is currently playing. Press the voice button and when prompted say: Voice command Whats This? | Whats Playing? Action and Description The system reads the metadata tags of the playing track, and if the metadata tags are populated, the system will tell you what track is playing. You can say any of the voice commands that appear within open and close brackets that are separated by |.
SYNC™ Bluetooth Audio Command Guide Voice command Search Track ___ | Search Song ___ The system searches for a specific artist/track/album from the music indexed through the USB port. This allows you to make Refine album ___ your previous command more specific. By using this command you can filter though a previous selection, such as an artist to play only specific album.
SYNC™ You can then scroll to: Message Action and Description Play your music by artist, album, genre, playlists, tracks, similar music or to simply, play all. You can also choose to Explore USB to view the supported digital music files on your playing device. See Play Menu later in this section for more information. Play Menu Select one of the following: Select Src USB Press the OK button to access music plugged into your USB port.
SYNC™ Message Action and Description Mobile Apps Interact with SYNC-capable mobile applications on your smartphone. Sys Settings Access available Bluetooth Device menu listings as well as Advanced menu listings. Exit Press OK to exit the media menu. 1 The time required to complete this depends on the size of the media the system needs to index. If autoplay is on, you can listen to media processed during indexing.
SYNC™ Message Artists Action and Description Sort all indexed media by artist. Once selected, the system lists and then plays all artists and tracks alphabetically. If there are fewer than 255 indexed artists, the system lists them alphabetically in flat file mode. If there are more than 255, the system categorizes them alphabetically. Press the OK button. You can select to play all artists or any indexed artist. 2. Scroll to choose the desired artist. Press the OK button. 1.
SYNC™ Message Browse USB Action and Description Explore all supported digital media on your media device connected to the USB port. You can only view media content which is compatible with SYNC; other files saved are not visible. 1. Press the OK button. 2. Scroll to explore indexed media on your flash drive. Similar music Play music similar to what is currently playing from the USB port. The system uses the metadata information of each song * to compile a playlist for you. 1. Press the OK button. 2.
SYNC™ Message Action and Description Press the OK button. When find SYNC appears in the display, press the OK button again. 2. Follow the directions in your phone's manual to put your phone into discovery mode. A six-digit PIN appears in the display. 3. When prompted on your phone's six-digit display, enter the PIN. 1. Connect BT Connect a previously paired Bluetooth-enabled phone. 1. Press OK to select and view a list of devices. 2.
SYNC™ You can then scroll to: Message Action and Description Sys Settings Press the OK button. Bluetooth device Press the OK button. You can then select one of the following: Confirmation Prompts Have SYNC guide you by asking questions, helpful hints or ask you for a specific action. 1. Press the OK button and scroll to toggle between on and off. 2. Make a selection and press the OK button. SYNC takes you back to the Advanced menu. Language Choose from the available languages.
SYNC™ Use the website at any time to check your phone's compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours). Visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca for more information. SYNC™ TROUBLESHOOTING Your SYNC system is easy to use. However, should questions arise, see the tables below.
SYNC™ Phone issues Issue Possible cause(s) Possible solution(s) Depending upon your phone, you may have to grant SYNC permission to access your phonebook contacts. Make sure to confirm when prompted by your phone during the phonebook download. I am having trouble connecting my phone to SYNC. This is a phone-dependent feature. This may be a possible phone malfunction. Go to the website to review your phone's compatibility.
SYNC™ USB and media issues Issue I am having trouble connecting my device. Possible cause(s) This may be a possible device malfunction. SYNC does not recognize This is a device limitation. my device when I turn on the car. Possible solution(s) Try turning off the device, resetting the device, removing the device's battery, then trying again. Make sure you are using the manufacturer's cable. Make sure you insert the USB cable correctly into the device and the USB port.
SYNC™ Vehicle Health Report and Services (Traffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a text that I did not activate Vehicle Health Report. You did not activate your account on the website. You may have the wrong VIN (vehicle identification number) listed. This is a free feature, but you must first register online to use it. Make sure that your VIN is correctly listed in your account.
SYNC™ Voice command issues Issue Possible cause(s) Possible solution(s) SYNC does not understand You may be using the wrong voice commands. what I am saying. You may be speaking too soon or at the wrong time. Review the phone voice commands and the media voice commands at the beginning of their respective sections. After pressing the voice icon, wait until after the tone sounds and Listening appears before saying a command. Any command spoken before this does not register with the system.
SYNC™ Voice command issues Issue Possible cause(s) Possible solution(s) The system may not be reading the name the same way you are saying it. Contacts in your phonebook may be very short and similar, or they may contain special characters. Your phonebook contacts may be in CAPS. Make sure you are saying the contacts exactly as they are listed. For example, if you save a contact as Joe Wilson, say "Call Joe Wilson".
SYNC™ AppLink issues Issue Possible cause(s) Possible solution(s) SYNC in order to find AppLink-capable apps on your device. iPhone users must also connect to SYNC's USB port with an Apple USB cable. My phone is connected, but AppLink-enabled apps are Ensure you have downI still cannot find any apps. not installed and running on loaded and installed the latest version of the app your mobile device. from your phone's app store. Ensure the app is running on your phone.
SYNC™ AppLink issues Issue Possible cause(s) Possible solution(s) On an iPhone with iOS7+, to force close an app, double tab the home button then swipe up on the app to close it. Tab the home button again, then select the app again to restart it. After a few seconds, the app should then appear in SYNC's Mobile App's Menu. My Android phone is connected, my app(s) are running, I restarted them, but I still cannot find any apps.
SYNC™ AppLink issues Issue My iPhone phone is connected, my app is running, I restarted the app but I still cannot find it on SYNC. Possible cause(s) Unplug the USB cable from The USB connection to SYNC may need to be reset. the phone, wait a moment, and plug the USB cable back in to the phone. After a few seconds, the app should appear in SYNC's Mobile Apps Menu. If not, "Force Close" the application and restart it. I have an Android phone.
Accessories *Ford Licensed Accessory. The accessory manufacturer designs, develops and therefore warrants Ford Licensed Accessories, and does not design or test these accessories to Ford Motor Company engineering requirements. Contact an authorized Ford dealer for the manufacturer's limited warranty details, and request a copy of the Ford Licensed Accessories product limited warranty from the accessory manufacturer.
Accessories • • An authorized dealer needs to install mobile communications systems. Improper installation may harm the operation of your vehicle, particularly if the manufacturer did not design the mobile communication system specifically for automotive use. If you or an authorized Ford dealer add any non-Ford electrical or electronic accessories or components to your vehicle, you may adversely affect battery performance and durability.
Accessories Each switch includes a power lead (a blunt-cut and sealed wire) located in the underhood cowl shield above the engine block powertrain control module. The power leads are coded as follows: Switch Circuit Number Wire Color Fuse Amp Rating AUX 1 CAC05 Yellow 30A AUX 2 CAC06 Green with Brown Trace 30A AUX 3 CAC07 Violet with Green Trace 10A AUX 4 CAC08 Brown 15A Learn more about auxiliary switches by visiting https://www.fleet.ford.com/truckbbas/.
Extended Service Plan (ESP) PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRS WITH A FORD EXTENDED SERVICE PLAN. That means you get: • Reliable, quality service at any Ford or Lincoln dealership • Repairs performed by factory trained technicians, using genuine parts SERVICE PLANS (U.S. Only) More than 32 million Ford owners have discovered the powerful protection of Ford Extended Service Plan.
Extended Service Plan (ESP) SERVICE PLANS (CANADA ONLY) Avoid the Rising Cost of Properly Maintaining Your Vehicle! You can get more protection for your vehicle by purchasing a Ford Extended Service Plan. Ford Extended Service Plan is the only service contract backed by Ford Motor Company of Canada, Limited.
Scheduled Maintenance Genuine Ford and Motorcraft Replacement Parts GENERAL MAINTENANCE INFORMATION Dealerships stock Ford, Motorcraft and Ford-authorized branded re-manufactured replacement parts. These parts meet or exceed our specifications. Parts installed at your dealership carry a nationwide 24-month or unlimited mile (kilometer) parts and labor limited warranty.
Scheduled Maintenance Ford Motor Company has recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends against maintenance schedules that deviate from the scheduled maintenance information.
Scheduled Maintenance Check every six months Hinges, latches and outside locks for proper operation. Lubricate if necessary. Parking brake for proper operation. Safety belts and seat latches for wear and function. Safety warning lamps (brake, ABS, airbag and safety belt) for operation. Washer spray and wiper operation. Clean or replace blades as necessary. Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly.
Scheduled Maintenance Be sure to ask your dealership service advisor or technician about the multi-point vehicle inspection. It is a comprehensive way to perform a thorough inspection of your vehicle. Your checklist gives you immediate feedback on the overall condition of your vehicle. NORMAL SCHEDULED MAINTENANCE Every 7500 miles (12000 km) or six months (whichever comes first) Change engine oil and filter. * Rotate tires , inspect tire wear and measure tread depth.
Scheduled Maintenance Other maintenance items * Change engine coolant. Every 105000 miles (168000 km) Replace rear axle fluid. Inspect accessory drive belt(s). ** Change automatic transmission fluid. *** Change automatic transmission filter. Every 150000 miles (240000 km) Replace accessory drive belt(s) if not replaced within the last 100000 miles (160000 km). Replace front wheel bearings and seals if non-sealed bearings are used. Every two years Replace brake fluid.
Scheduled Maintenance perform extra maintenance as indicated. If you operate your vehicle occasionally under any of these conditions, it is not necessary to perform the extra maintenance. For specific recommendations, see your dealership service advisor or technician. SPECIAL OPERATING CONDITIONS SCHEDULED MAINTENANCE If you operate your vehicle primarily in any of the following conditions, you need to Towing a trailer or using a car-top carrier Inspect frequently, service as required Inspect U-joints.
Scheduled Maintenance Extensive idling or low-speed driving for long distances, as in heavy commercial use (such as delivery, taxi, patrol car or livery) Every 5000 miles (8000 km) or six months or 200 engine hours Change engine oil and filter. Every 30000 miles (48000 Replace front wheel bearing grease and grease seals if km) non-sealed bearings are used. Every 60000 miles (96000 Replace spark plugs.
Scheduled Maintenance Hot climate oil change intervals: Vehicles operating in the Middle East, North Africa, Sub-Saharan Africa or locations with similar climates using an American Petroleum Institute (API) Certified for Gasoline Engines (Certification mark) oil of SM or SN quality, the normal oil change interval is 5000 miles (8000 kilometers).
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 274 E-Series (TE4), enUSA, First Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 275 E-Series (TE4), enUSA, First Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 276 E-Series (TE4), enUSA, First Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 277 E-Series (TE4), enUSA, First Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 278 E-Series (TE4), enUSA, First Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 279 E-Series (TE4), enUSA, First Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 280 E-Series (TE4), enUSA, First Printing
Appendices • END USER LICENSE AGREEMENT SYNC End User License Agreement (EULA) • • You have acquired a device ("DEVICE") that includes software licensed by Ford Motor Company and its affiliates ("FORD MOTOR COMPANY") from an affiliate of Microsoft Corporation ("MS") . Those installed software products of MS origin, as well as associated media, printed materials, and "online" or electronic documentation ("MS SOFTWARE") are protected by international intellectual property laws and treaties.
Appendices • Description of Other Rights and Limitations • • • • Speech Recognition: If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
Appendices • • • supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE ("Supplemental Components").
Appendices • • Links to Third Party Sites: The MS SOFTWARE may provide you with the ability to link to third party sites through the use of the SOFTWARE. The third party sites are not under the control of MS, Microsoft Corporation, their affiliates and/or their designated agent.
Appendices Adobe TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, MS, Microsoft Corporation, third party software or service providers, their affiliates or suppliers. Contains Adobe® [Flash® Player] or [AIR®] technology by Adobe Systems Incorporated. This [Licensee Product] contains [Adobe® Flash® Player] [Adobe® AIR®] software under license from Adobe Systems Incorporated, Copyright ©1995-2009 Adobe Macromedia Software LLC.
Appendices Use of Speech Recognition Functions: Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech recognition functions included in the system and address any errors. WARNING Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences.
Appendices Potential Map Inaccuracy: Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes. Telenav may revise this Agreement and the privacy policy at any time, with or without notice to you. You agree to visit http://www.telenav.com from time to time to review the then current version of this Agreement and of the privacy policy.
Appendices 2.
Appendices COURSE OF DEALING, CUSTOM OR TRADE AND INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS WITH RESPECT TO THE TELENAV SOFTWARE. Certain jurisdictions do not permit the disclaimer of certain warranties, so this limitation may not apply to you.
Appendices the terms and conditions of this Agreement. Any such sale, assignment or transfer that is not expressly permitted under this paragraph will result in immediate termination of this Agreement, without liability to Telenav, in which case you and all other parties shall immediately cease all use of the Telenav Software. Notwithstanding the foregoing, Telenav may assign this Agreement to any other party at any time without notice, provided the assignee remains bound by this Agreement.
Appendices Agreement), and thus your use of the Telenav Software is also subject to such terms. You agree to comply with the following additional terms and conditions, which are applicable to Telenav’s third party vendor licensors: 9.2 End User Terms Required by NAV2 (Shanghai) Co., Ltd The data (“Data”) is provided for your personal, internal use only and not for resale.
Appendices Disclaimer of Liability: positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. This Data is provided to you “as is,” and you agree to use it at your own risk.
Appendices that any such export laws, rules or regulations prohibit HERE from complying with any of its obligations hereunder to deliver or distribute Data, such failure shall be excused and shall not constitute a breach of this Agreement. NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: HERE CONTRACTOR (MANUFACTURER/ SUPPLIER) ADDRESS: c/o Nokia, 425 West Randolph Street, Chicago, Illinois 60606 Entire Agreement.
Appendices 2.
Appendices either express or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. The licensors, including Her Majesty, Canada Post and NRCan, shall not be liable in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the Data.
Appendices A. Third Party Notices. Any and all copies of the Data and/or packaging relating thereto shall include the respective Third Party Notices set forth below and used as described below corresponding to the Territory (or portion thereof) included in such copy: Country Notice Jordan “© Royal Jordanian Geographic Centre”. The foregoing notice requirement for Jordan Data is a material term of the Agreement.
Appendices is conditioned on Client’s obtaining prior written consent from Kartografie a.s.
Appendices Sweden “Based upon electronic data © National Land Survey Sweden.” Product incorporates data which is © 20XX Telstra Corporation Limited, GM Holden Limited, Intelematics Australia Pty Ltd and Continental Pty Ltd. Switzer- “Topografische Grundlage: © land Bundesamt für Landestopographie. B. Third Party Notices for Australia.
Appendices No Other Warranty: with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. You agree to cease using this Data if you fail to comply with these terms and conditions.
Appendices Export Control Gracenote® Copyright You agree not to export to anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations. CD and music-related data from Gracenote, Inc., copyright© 2000-2007 Gracenote. Gracenote Software, copyright © 2000-2007 Gracenote. This product and service may practice one or more of the following U.S.
Appendices You agree that you will use the content from Gracenote ("Gracenote Content") , Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal, non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Content, Gracenote Software or any Gracenote Data (except in a Tag associated with a music file) to any third party.
Appendices Vehicle with SYNC only United States and Mexico FCC ID: KMHSG1G1 IC: 1422A-SG1G1 Mexico Model: KMHSG1P1 NOM-121-SCT1-2009 The operation of this equipment is subject to the following two conditions: (1) This equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation.
Index A Automatic Transmission Fluid Check.............................................................140 Automatic Transmission Fluid Filter............143 Checking Automatic Transmission Fluid.....................................................................141 A/C See: Climate Control...........................................63 About This Manual...........................................5 ABS Auxiliary Power Points..................................
Index Direction Indicators.......................................45 Driver and Passenger Airbags...................28 Changing a Road Wheel............................185 Dissimilar Spare Wheel and Tire Assembly Information......................................................186 Tire Change Procedure.....................................187 Children and Airbags...........................................32 Passenger Airbag On and Off Switch ..........28 Proper Driver and Front Passenger Seating Adjustment.
Index G Essential Towing Checks...........................104 Before Towing a Trailer....................................109 Hitches...................................................................105 Launching or Retrieving a Boat or Personal Watercraft (PWC)..........................................110 Safety Chains......................................................106 Trailer Brakes.......................................................106 Trailer Lamps.............................................
Index I Load Limit.........................................................93 General Information............................................55 Special Loading Instructions for Owners of Pick-up Trucks and Utility-type Vehicles.............................................................100 Vehicle Loading - with and without a Trailer...................................................................93 Information Messages.................................60 Locking and Unlocking.......................
Index Replacing a Lost Key or Remote Control............................................................36 Reporting Safety Defects (Canada Only)...............................................................126 Reporting Safety Defects (U.S. Only)...............................................................125 Roadside Assistance....................................116 Opening and Closing the Hood...............135 Ordering Additional Owner's Literature....................................................
Index The Better Business Bureau (BBB) Auto Line Program (U.S. Only)........................123 Tire Care...........................................................163 Special Notices................................................10 New Vehicle Limited Warranty........................10 Notice to Owners of Pickup Trucks and Utility Type Vehicles........................................10 On-board Diagnostics (OBD-II)......................10 Special Instructions.............................................
Index Vehicle Storage.............................................159 Using SYNC™ With Your Media Player.............................................................242 Battery....................................................................160 Body........................................................................160 Brakes.....................................................................160 Cooling system...................................................160 Engine............................
Index Wheels and Tires..........................................162 General Information..........................................162 Technical Specifications.................................189 Windows and Mirrors...................................46 Windshield Washers.....................................43 Windshield Wipers.........................................43 Wipers and Washers.....................................43 Wrecker Towing See: Transporting the Vehicle..........................
