Operation Manual

STATION TUNING
CONTROL
Seek tuning
Select a waveband and briefly press
one of the arrow buttons. The unit
will stop at the first station it finds in
the direction you have chosen.
Manual tuning
Sony CD/6CD
Press the up or down arrow
button. The display shows the
frequency selected.
Except Sony CD/6CD
Press the MENU button until the
MAN display appears.
Then press one of the arrows to
tune down or up the waveband
in small increments or press and
hold to increment quickly, until you
find a station you want to listen to.
Scan tuning
Note:
This feature is not available on
certain units and may not appear as
a menu option.
SCAN allows you to listen to 10
seconds of each station detected.
Sony CD/6CD
Press the SCAN button. SCAN
flashes or SCANNING... is shown
in the display and each station is
played for a few seconds.
Press SCAN again to continue
listening to a station.
Except Sony CD/6CD
Press the MENU button
repeatedly until a SCAN display
appears.
Use the arrow buttons to scan up
or down the selected waveband.
SCAN appears in the display and
each station is played for 10
seconds.
Depending on the audio unit,
press the left or right arrow button
or MENU again to continue
listening to a station.
STATION PRESET
BUTTONS
This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the
preset buttons.
Select a waveband.
Tune to the station required.
Press and hold one of the preset
buttons. The audio unit will mute.
When sound returns the station
has been stored.
11
Audio unit operation