Operation Manual

•
Use the left or right arrow button
to select either local (‘TA LOCAL’)
or distant (‘TA DIST’) traffic
announcements. To confirm your
selection allow the menu to time
out or press the menu button.
•
‘TA-L or ‘TA-D’ appear in the
display to show which has been
selected.
Traffic announcement
volume
Traffic announcements interrupt
normal broadcasts at a preset
minimum level that is usually louder
than normal listening volumes.
To adjust the preset volume:
•
Press and hold the TA button.
•
Use the volume control or, on
Sony units, the arrow buttons to
make the necessary adjustment.
The display will show the level
selected.
Ending traffic
announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the
announcement prematurely, press
TA during the announcement.
Note: If you press TA at any other
time it will switch all announcements
off.
18
Audio unit operation