Operation Manual

SECURITY CODE
Most units incorporate a unique
Keycode security number that must
be entered before the unit will
operate. Normally, the Ford Dealer
does this during the predelivery
inspection.
If the battery is disconnected for any
reason, or the audio unit is removed
from the vehicle, the Keycode must
be re-entered before the unit will
work again.
LOST SECURITY CODE
If you lose the Keycode, contact your
dealer and supply details of your
audio unit along with some proof of
identity. Your Dealer will then obtain
the correct code from Ford Motor
Company.
ENTERING A SECURITY
CODE
If ‘CODE - - - -’, ‘CODE 0000’ or
‘Enter Keycode’ appears in the
display when you switch on the audio
unit, you must enter the Keycode
using the station preset buttons.
Sony CD/6CD Generation 2
1. Press the numbered button
corresponding to the first digit of
your Keycode.
2. Press the numbered button
corresponding to the second digit
of your Keycode. Repeat for digits
3 and 4 in the same way.
3. If you make a mistake entering the
code, you may re-enter the digits
by continuing to select buttons
0-9. The display will advance from
digit position 1 to 4 and then back
again.
4. Ensure the complete Keycode
displayed is correct before
pressing preset button * to
confirm.
Except Sony CD/6CD
Generation 2
1. Press button 1 repeatedly until the
first digit of your Keycode is
shown in the display.
2. Press preset buttons 2, 3 and 4
in the same way for remaining
three digits.
3. Ensure the complete Keycode is
correct before pressing preset
button 5 to confirm it except
1500RDS press the AM/FM
button.
INCORRECT SECURITY
CODE
Up to 10 Keycode entry attempts are
allowed with various consequences
if you get it wrong.
6
Audio system security