Operation Manual

E85767
2. Insert the key into the key holder.
E85766
3. With the key in this position you can
press the button to switch the ignition
on and start your vehicle.
Stopping the engine with the
vehicle stationary
Note: The ignition, all electrical circuits,
warning lamps and indicators will be
switched off.
Manual transmission
Briefly press the button.
Automatic transmission
1. Move the transmission selector lever
to position P.
2. Briefly press the button.
Stopping the engine when the
vehicle is moving
WARNING
Switching off the engine when the
vehicle is still moving will result in a
loss of brake and steering assistance.
The steering will not be locked, but higher
effort will be required. When the ignition is
switched off some electrical circuits,
warning lamps and indicators may also be
OFF.
Press and hold the button or press twice
within two seconds.
DIESEL PARTICULATE FILTER
The DPF forms part of the emissions
reduction systems fitted to your vehicle. It
filters harmful diesel particulates (soot)
from the exhaust gas.
Regeneration
WARNING
Do not park or idle your vehicle over
dry leaves, dry grass or other
combustible materials. The DPF
regeneration process creates very high
exhaust gas temperatures and the exhaust
will radiate a considerable amount of heat
during and after DPF regeneration, and
after you have switched the engine off.
This is a potential fire hazard.
CAUTION
Avoid running out of fuel.
Note: During regeneration at low speed or
engine idle, you may smell a hot metallic
odour and could notice a clicking metallic
sound. This is due to the high temperatures
reached during regeneration and is normal.
123
Starting and Stopping the Engine