Operation Manual

3
E135138
4
2
2. Insert the key. Turn the key
anti-clockwise.
3. Remove the cover.
4. Loosen the screws.
E135140
A
B
5. Install rubber strips in the positions
shown.
E135139
4N
m
4 Nm
7
A
Note: Make sure there is no gap between
crossbar and rail(A).
6. Install the crossbars.
7. Tighten the screws until you hear a
distinct click.
8. Install the cover. Turn the key clockwise
to lock.
9. Remove the key.
Installing a roof box
E135141
Make sure the adhesive pads are not in
contact with the installation bolt.
175
Load Carrying