Operation Manual

Type 1
Ambient lighting illuminates several areas,
for example footwells, cup holders and
doors with a single colour and can be
switched on and off using the information
display menu. See General Information
(page 78).
Use the instrument lighting dimmer
switches to adjust to the desired
brightness. See Instrument Lighting
Dimmer (page 116).
Type 2
E133092
Ambient lighting illuminates several areas,
for example footwells, cup holders and
doors with a choice of several colours. The
ambient lighting control switch is located
in the overhead console.
To activate, rotate the control knob and
adjust to the desired brightness. Use the
left switch to cycle through the colour
choices. Use the right switch to activate
all ambient light areas and interior lamps.
REMOVING A HEADLAMP
WARNING
Have Xenon bulbs changed by a
trained technician. There is a risk of
electric shock.
1. Open the bonnet. See Opening and
Closing the Bonnet (page 196).
E133215
2
2
4
3
2. Remove the screws.
3. Pull the headlamp as far as possible
towards the front of the vehicle to
disengage it from the lower fixing point.
4. Lift the outer side of the headlamp and
remove it.
E133750
5
5. Disconnect the electrical connector.
56
Lighting