Manual

20
43 Refine the stop cut at the primaries and the
tertials using a smooth end diamond cylinder or
flame.
44 Use a split sanding mandrel with 120-grit
cloth backed sandpaper or a sanding roll to
remove the wood and scratches left by the
Typhoon
®
burs. This step will be repeated
again later.
45 Lay the sanding accessory on its side to
refine and maintain the canals for the side pock-
ets, the middle of back and the cheek pouch,
including the ey
e canal.
46 Use a split sanding mandrel with 150
-grit
cloth backed sandpaper or a sanding roll to remove
w
ood and shape the area under and behind the
nec
k. Use a sanding mandrel to reac
h the area
w
here the nec
k and bod
y join and under the chin.
41 Remove wood from under the tail and con-
tour from the rump to the tail using the same
Typhoon® sleeve or cylinder.
42 Use a smooth end diamond cylinder or a
flame to make a slight “v” on the top of the base
of the bill.