ITEM#: 11990040T001-ST IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. COZUMEL 4PC DEEP SEATING SET Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m.– 5:00p.m. EST, M-F Toll Free : 1-800-443-1410 (USA) Fax: (973) 428-8026 www.foremostgroups.
WARNING! Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly. Place the table on a non-abrasive flat surface to prevent scratching.
WARNING! Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly. Place the table on a non-abrasive flat surface to prevent scratching.
1 Carefully place the Chair Seat (B) on a non-abrasive flat surface. Align the holes on the Seat (B) with holes on the Back (A) and secure with Bolts (CC) through Lock Washers (EE) and Flat Washers (DD). DO NOT tighten bolts completely. A DD EE CC B Fig 1 2 Align the holes on the chair side with holes on the Right Leg (F). Secure with Bolts (BB) through Flat Washers (DD) and Bolts (CC) through Lock Washers (EE) and Flat Washers (DD). DO NOT tighten bolts completely.
3 Once all parts are aligned correctly, securely tighten bolts with Allen Key (FF). Turn the chair to the upright position and place Seat Cushion (H) and Back Cushion (G) on the chair. Repeat above steps to assemble the other chair.
4 Carefully place the Sofa Seat (D) on a non-abrasive flat surface. Align the holes of the Seat (D) with holes on the Back (C) and secure with Bolts (CC) through Lock Washers (EE) and Flat Washers (DD). DO NOT tighten bolts completely. DD EE CC C D Fig 4 5 Align the holes on the sofa side with holes on the Right Leg (F). Secure with Bolts (BB) through Flat Washers (DD) and Bolts (CC) through Lock Washers (EE) and Flat Washers (DD). DO NOT tighten bolts completely.
6 Once all parts are aligned correctly, securely tighten bolts with Allen Key (FF). Turn the sofa to the upright position and place the Seat Cushions (H) and Back Cushions (G) on the sofa.
7 Carefully place the Table Top (I) upside down on a non-abrasive flat surface. Align the holes on the Top (I) with holes on the Legs (J). Secure with Bolts (AA) through Lock Washers (EE) and Flat Washers (DD). DO NOT tighten bolts completely. AA EE DD J J I Fig 7 8 Align the holes on the Legs (J) with holes on the Leg Connector (K). NOTE the direction of leg connector (K). Secure with Bolts (AA) through Lock Washers (EE) and Flat Washers (DD).
Turn the table to the upright position. The table is ready for your enjoymnet.
CARE & MAINTENANCE Clean furniture frame with wet towel using mild soap and water solution. Dry completely with soft towel. Clean cushions and sling seat material with a mild solution of soap and water and hang cushions to drip dry completely. Store them in a clean dry area of your home. Do not machine wash or dry. Do not use bleach or strong solvents to clean any of your patio furniture. It will harm both fabrics and metal finishes.
