Installation Instructions

1/3

Locate the proper place on the vanity top that the drop-in sink

will be installed. Make sure that there is enough room under the

vanity top for the faucet water supply lines, drain assembly and

bottom of drop-in sink. Spacing on back of drop-in to backsplash

of vanity should have enough distance to accommodate desired

faucet. (Figure 1)

The outside diameter of the drop-in hole should be cut to

accommodate the drop-in sink. Please refer to the supplied

template. Trace the cut-out line from the template onto the

vanity (this will be the cut-out line). Make sure that the cut out

line is centered on the vanity. (Figure 2)

Conﬁrm that the mark on the vanity lines up with the drop-in

sink. Make a clearance hole anywhere near the cut-out line on the

inside and then cut out the portion within the cut-out line.

(Figure 3)

FIG 3

Place the drop-in sink into place. Check to make sure that the

drop-in sink is centered on the vanity top and there is enough

space for it to ﬁt into place. (Figure 4)

KEIRAN SQUARE DROP-IN SINK INSTALLATION

SQUARE DROP-IN SINK

4" FAUCET CENTER

WHITE

MODEL 17-0037-4W

SKU # 6071625

SQUARE DROP-IN SINK

8" FAUCET CENTER

WHITE

MODEL 17-0037-8W

SKU # 6071626

FIG 1

FIG 2

FIG 4

PAGE 1
KEIRAN SQUARE DROP-IN SINK INSTALLATION SQUARE DROP-IN SINK 4" FAUCET CENTER WHITE SQUARE DROP-IN SINK 8" FAUCET CENTER WHITE MODEL 17-0037-4W SKU # 6071625 MODEL 17-0037-8W SKU # 6071626 1 2 3 4 Locate the proper place on the vanity top that the drop-in sink will be installed. Make sure that there is enough room under the vanity top for the faucet water supply lines, drain assembly and bottom of drop-in sink.
PAGE 2
5 6 FIG 5 Mount the faucet and drain assembly (not included) on the sink following faucet manufacturer’s instructions. (Figure 5) After confirming that the drop-in sink fits into place, turn drop-in sink upside down and apply a generous portion of sealant on the underside of the rim close to the edge. (Figure 6) FIG 6 7 After the sealant has been applied, carefully place drop-in sink into place and press down firmly. Trim any excess sealant or putty off.
PAGE 3
LIMITED WARRANTY The manufacturer warrants its products to be free from defects in material or workmanship for 5 years from the date of purchase of the product by the original purchaser. If inspection of this plumbing product, within 5 years after its initial purchase, confirms that it is defective in materials or workmanship, the manufacturer will repair or at its option, exchange the product for a similar model. The manufacturer provides no warranties or guarantees beyond those in this Limited Warranty.
PAGE 4