Instructions / Assembly

ManualsBrandsForemost ManualsStorage & Organization15 in. Honey Open Cube

ASSEMBLY INSTRUCTION

15”WOpenCube

MODEL#A3276

AdultAssemblyisRequired.

Beforeproceedingwiththeassembly,pleasereadtheinstructionscarefully.Unpackallthecomponentsand

placethemonasmoothsurfacetoavoidscratchingordamagingyournewfurniture.Identifyalltheparts

andcomponentsbycomparingthemwiththeAssemblyInstruction,PleasecontactFOREMOST®

Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for

parts.Pleasereferencetheitemnumberandpartdescription.Donotusethisproductifpartsare

damaged,missingorbroken.

Remembertotightenallofthehardware,andDONOTclimbonfinishedproduct.

CLEANINGCARE

Dustusingalintfreecloth.

Cleanthesurfaceusingadampclothandmilddishwashingliquidifnecessary.

DONOTuseanycleaningproductcontainingalcoholorammonia.

DONOTusestrongsolvents,bleach,orabrasivematerialsastheymaydamagethefinish.

www.foremostgroups.com Page1of4

15”WOpenCube ▏MODEL#A3276

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTION 15”W Open Cube MODEL # A3276 Adult Assembly is Required. Before proceeding with the assembly,please read the instructions carefully.Unpack all the components and place them on a smooth surface to avoid scratching or damaging your new furniture.Identify all the parts and components by comparing them with the Assembly Instruction,Please contact FOREMOST® Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for parts.
PAGE 2
WARRANTY Each cube manufactured by Foremost Groups Inc. is covered by a one (1) Year Limited Warranty. We warrant our products to be free from defects in material or workmanship for a period one (1) year from the date of original purchase. Failure caused by unreasonable or abusive use.
PAGE 3
1.Insert wood dowels (E) into the pre-drilled holes on both end of side panels (B) and attach side panels (B) to bottom panel (C)。Insert wood screws (F) in to the bottom panel (C) to connect it to the side panels (B). Make sure it is tighten securely. (1) (2) 2.Insert back panel (D) by sliding it trough the grooves on side panels (B), Make sure to insert it all the way down, till it reaches the bottom panel (C). (3) 3.Attach top panel (A) with wood screws (F). 4.Attach caps (G) to top panel (A).
PAGE 4
6.Customers may connect the cubes in the following three ways (see illustration (6): Option 1:Attach brackets (H) to the back of the hollow core cube with screws (I) to connect it to other cubes and stabilize them. Option 2:Remove the four caps (G) on the surface of the lower cube and make sure the wood screws are tightened securely.Put four wood dowels (K) in the pre-drilled holes and then put another cube on the lower one as the picture indicated.