Installation Instructions

- 2 -
A
C
B
2
1
PREPARING THE WALL
HANGING THE MIRROR
WALL
WALL
O Place the mirror (A) against the wall and determine your desired hanging
location. Using a pencil, mark two locations on the wall that match up with
the mirror’s (A) pre-attached mounting hooks.
O Ensure the marks are horizontally straight by using a level.
NOTE: It is best to find a stud in your wall to ensure the mirror hangs securely.
O Use a hammer to gently punch the anchor (B) halfway into the wall at each
marked location. Finish screwing in the anchor (B) with the screwdriver..
O Using the screwdriver, insert the screws (C) into the anchors (B), leaving
approximately 1/8 in. of the screw (C) revealed.
O Hold the mirror (A) in place against the wall and line up the mounting hooks
with the screws (C).
O Loop the mounting hooks over the scews (C) to hang the mirror (A).