Installation Guide
2
7
9
1
8
CAULK GLUE
When attaching your door to Fiberglass or Acrylic
you must use a 1/8" drill bit and NO WALL ANCHORS.
Step 1) Measure and cut threshold
to your exact opening size.
Step 2) Silicone or Caulk bottom of
threshold.
Next:
Step 1) Attach support pivots(#7 on parts list)
to bottom of pivot jamb(#1 on parts list).
Step 2) Set pivot jamb on the threshold.
Step 3) Mark your holes, remove jamb
Step 4) Drill holes and then attach pivot jamb.