Installation Instructions

PEDESTAL SINK KIT INSTALLATION
1/5
1
Shut o the water supply then disconnect and drain the
water supply lines.
2
Locate proper position for pedestal lavatory. Make sure
that you have access to all plumbing and drain fittings,
door clearance and any other obstructions.
3
Place pedestal sink on the pedestal base and move into
the desired position against the wall. Make sure that the
pedestal sink is leveled on the pedestal base. With a pencil,
mark the location of the pedestal sink support holes on the
wall. (Figure 1)
4
On the marked location on the wall, drill holes with a ⅝"
drill bit if the pedestal will not be attached onto a stud. If
the pedestal will be mounted onto a stud, then drill holes
with a ⅛" drill bit.
FREDERIC PEDESTAL SINK KIT
MODEL FL-5300-4W
SKU # 6076965
FIG 1
HARDWARE INLCUDED:
CBA
A Toggle Bolts (x2)
B Lag Screws (x2)
C Metal Washers (x2)
D Rubber Washers (x2)
D

Summary of content (5 pages)