Installation Instructions

10
Left Hand Assembly
Right Hand Assembly
2
7
2
Lagoon Double Roller Door
Customer Service 1-888-620-3667
1/4"
4
5
6
7
4
1
6
5
4
Screw 1 1 4 (4 pcs) / "
1/4"
4
5
6
7
4
1
6
3
STEP 8
1.Make sure 180°magnet seal short(2) attracted each other, and adjust the
roller if any gap.
2.Match both 180°magnet seal short(2) and outer door(3)
3.Mark the position of the magnetic aluminium(1) and drill hole on wall.
4.Put magnetic aluminum(1) at the position line and mark and drilling hole.
5.Draw hole with 1/4" drill bits.
6.Glue a little silicone into the hole, then insert wall anchor.
7.Fix magnetic aluminum against the wall with screw 1 1/4"(4).
1
STEP 8
1.Make sure 180°magnet seal short(2) attracted each other, and adjust the
roller if any gap.
2.Match both 180°magnet seal short(2) and outer door(3)
3.Mark the position of the magnetic aluminium(1) and drill hole on wall.
4.Put magnetic aluminum(1) at the position line and mark and drilling hole.
5.Draw hole with 1/4" drill bits.
6.Glue a little silicone into the hole, then insert wall anchor.
7.Fix magnetic aluminum against the wall with screw 1 1/4"(4).
1
2
2
2
1
3
3
2
2
2
1
3
5
4
Screw 1 1 4 (4 pcs) / "