LAGOON - LGDRV DOUBLE ROLLER SHOWER DOOR COPY THE MODEL NUMBER FOR YOU RECORDS HERE # Please visit us on YouTube and view our shower door installation videos. One may be available for your installation. www.youtube.com/foremostgroups.com READ THE INSTRUCTIONS CAREFULLY, familiarize yourself with all the parts as shown in the exploded view. he exploded view will also provide a helpful reference when relating to the location of the various parts and how they are mounted.
Lagoon Double Roller Door ® 7 8 Screw 1 1/4" (8 pcs) 54 9 1 Screw 1 1/4" (8 pcs) 58 2 10 3 11 4 12 5 6 13 14 15 16 17 18 19 20 21 1
Lagoon Double Roller Door ® PART LIST Magnetic Aluminum (2 pc ) 180°Magnet Seal Short (2 pcs) all racket its (2 pcs) Rail Inner oor (1 pc) Screw 1 1/4" (8 pcs) Top Rail (1 pc) Double Roller (2 pcs) Screw over (2 pcs) Door uide (1 pc) Threshold (2 pcs) Wall Anchor (16 pcs) Anti- umper (2 pcs) 18 Threshold gasket (2 pcs) Water-Retaining asket (2 pcs) 21 20 19 Threshold over (2 pcs) Roller (2 pcs) 17 16 Outer oor (1 pcs) Handle (2 pcs) Screw 1 1/4" (8 pcs) Spanner (2 pcs) Allen ey
Lagoon Double Roller Door ® Choose whether you will need to assemble your shower door Follow the appropriate diagram below. Left Hand Assembly STEP 1 1.Installation Measurement. 43"-47"(1093-1194mm) 55"-59"(1397-1498mm) Right Hand Assembly STEP 1 1.Installation Measurement.
Lagoon Double Roller Door Choose ® you will need to assemble your shower door. Follow the appropriate diagram below. Left Hand Assembly STEP 2 1.Install door guide(19) at the middle of tray. 2.Draw the installation hole and position line of door guide(19). 3.Drill hole with 1/4" drill bits. 4.Fix door guide(19) on tray with screw 1 1/4"(8). Note: Shower or tub threshold needs to have a flat surface of 2 3/4". Right Hand Assembly STEP 2 1.Install door guide(19) at the middle of tray. 2.
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 3 1. Outside distance between rail wall bracket kit(7) and door guide(19) should be 1”. 2. Split parts of rail wall bracket kits(7 3. Make sure the distance from bottom of rail wall bracket kits(7) to floor should be (product height-3 1/2"=c) shown as below. Then draw the installation position of rail wall bracket kits(8). 4. Drill hole with 1/4" drill bits. Glue a little silicone into the hole, then insert wall anchor(6).
Lagoon Double Roller Door ® Left Hand Assembly Right Hhand Assembly STEP 4 Note: f installation dimension is between 43"-45 5/8"(1093-1158mm) OR 55"-57 1/2"(1397-1462mm) Please cut the top rail accordingly (9). Insert top rail(9) into rail wall bracket kits(7) (make the adjustment equally for both sides), then level top rail with level, and install rail wall bracket kits(7) ast. Tighten with allen key(21).
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 5 1. Install threshold gasket(17) at the bottom of inner door(13) 2. Cut water-retaining gasket(18) with 4 3/4" at the top part (see picture 2) 3. Install water-retaining gasket(18) on inner glass. STEP 5 1. Install threshold gasket(17) at the bottom of inner door(13) 2. Cut water-retaining gasket(18) with 4 3/4" at the top part (see picture 2) 3. Install water-retaining gasket(18) on inner glass.
Lagoon Double Roller Door Left Hand Assembly ® Right Hand Assembly STEP 6 STEP 6 1.Disconnect double roller(10), then put it into the slot of top rail(9). 1.Disconnect double roller(10), then put it into the slot of top rail(9).
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 7 1.Insert inner door(13) onto the door guide(19) slot. 2.Install double roller(10) with the inner door panel(13) with spanner, tighten the hexagonal nut. STEP 7 1.Insert inner door(13) onto the door guide(19) slot. 2.Install double roller(10) with the inner door panel(13) with spanner, tighten the hexagonal nut.
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 8 1.Make sure 180°magnet seal short(2) attracted each other, and adjust the roller if any gap. 2.Match both 180°magnet seal short(2) and uter door(3) 3.Mark the position of the magnetic aluminium(1) and drill hole on wall. 4.Put magnetic aluminum(1) at the position line and mark and drilling hole. 5.Draw hole with 1/4" drill bits. 6.Glue a little silicone into the hole, then insert wall anchor. 7.
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 9 1.Install roller(11) on outer door(3), then tighten with spanner. 2.Install threshold gasket(17) at the bottom of outer door(3). 3.Cut water-retaining gasket(18) with 4 3/4"(120mm) at the top part (see picture 3). 4.Install water-retaining gasket(18) on outer glass(3). STEP 9 1. Install roller(11) on outer door(3), then tighten with spanner. 2. Install threshold gasket(17) at the bottom of outer door(3). 3.
Lagoon Double Roller Door ® Left Hand Assembly STEP 10 1.Put outer door(3) onto the top rail(9). H H=Product Height Right Hand Assembly STEP 10 1. Put outer door(3) onto the top rail(9).
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 11 1. Put level at top of outer door(3) to make sure outer door(3) is leveled, then install anti-jumper on outer door(3). 2. Install handle(5) on outer door(3/13). STEP 11 1. Put level at top of outer door(3) to make sure outer door(3) is leveled, then install anti-jumper on outer door(3). 2. Install handle(5) on outer door(3/13).
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 12 1.Make sure 180°magnet seal short(2) attracted each other, and adjust the roller if any gap. 2.Match both 180°magnet seal short(2) and Outer door(3) 3.Mark the position of the magnetic aluminium(1) and drill hole on wall. 4.Put magnetic aluminum(1) at the position line and mark and drilling hole. 5.Draw hole with 1/4" drill bits. 6.Glue a little silicone into the hole, then insert wall anchor. 7.
Lagoon Double Roller Door ® Left Hand Assembly Right Hand Assembly STEP 13 Write down distance from wall to water-retaining gasket(18), then cut threshold(16) with size “distance-1/2"(12mm)”. Install threshold(16) and threshold cover(15). 3.Mark a hole for the threshold cover (15) for installation with hreshold cover drill bit. 4.Draw hole with 6mm drill bits. Fix threshold cover(15) with screw 1 1/4" under the tray or groundmass.
Lagoon Double Roller Door Left Hand Assembly STEP 14 1. Caulking, and not allow to open & close the door within 24 hours. 24 H FINAL STEP: Caulk the inside sides of the shower door frame to seal. Keep the entire area dry for a minimum of 24 hours. Your installation is now complete. ® Right Hand Assembly STEP 14 1. Caulking, and not allow to open & close the door within 24 hours. 24 H FINAL STEP: Caulk the inside sides of the shower door frame to seal. Keep the entire area dry for a minimum of 24 hours.
ATTENTION CONSUMER: Important Shower Enclosure Warranty Information Please do not discard Thank you for your purchase of a shower enclosure from Foremost Groups, Inc. In order to be elligible for product warranty, please register your enclosure on our website within two (2) weeks of installation. Go to www.foremostbath.com/warranty or scan the code below and follow the instructions.