Installation Guide

14
Left Hand Assembly
Right Hand Assembly
Lagoon Double Roller Door
1/4"
4
5
6
7
6
6
4
4
1
5
4
Screw 1 1/4 (4 pcs)"
1/4"
4
5
6
7
6
6
4
4
1
1
STEP 12
1.Make sure 180°magnet seal short(2) attracted each other, and adjust the
roller if any gap.
2.Match both 180°magnet seal short(2) and Outer door(3)
3.Mark the position of the magnetic aluminium(1) and drill hole on wall.
4.Put magnetic aluminum(1) at the position line and mark and drilling hole.
5.Draw hole with 1/4" drill bits.
6.Glue a little silicone into the hole, then insert wall anchor.
7.Fix magnetic aluminum against the wall with screw 1 1/4"(4).
STEP 12
1.Make sure 180°magnet seal short(2) attracted each other, and adjust the
roller if any gap.
2.Match both 180°magnet seal short(2) and Outer door(3)
3.Mark the position of the magnetic aluminium(1) and drill hole on wall.
4.Put magnetic aluminum(1) at the position line and mark and drilling hole.
5.Draw hole with 1/4" drill bits.
6.Glue a little silicone into the hole, then insert wall anchor.
7.Fix magnetic aluminum against the wall with screw 1 1/4"(4).
1
13
2
2
2
1
3
13
2
2
2
1
3
5
4
Screw 1 1/4 (4 pcs)"
®