Installation Instructions

- 2 -
A
C
B
1
OPTIONAL
Insert the 4 shelf pins (C) into the 4 pre-drilled holes at
the desired height inside the vanity (A) compartment.
Slide the shelf (B) into the compartment above the pins.
INSTALLING THE SHELF
Fully extend the drawer.
Pull the two
latches outward on the underside of the drawer to release the lock.
Simultaneously tilt and lift the drawer upwards to pull it out of the vanity (A).
If the floor is uneven, causing the vanity (A) to wobble, determine which foot
needs to be adjusted in height.
Carefully tilt the vanity (A) either backwards or forwards to access the leg leveler.
Turn it clockwise to make the leg shorter,
or counterclockwise to make it longer.
Repeat as needed with the other feet until the vanity (A)
stands solidly on the floor.
REMOVING THE DRAWER & ADJUSTING THE LEG LEVELERS